By Professor Chi King Lee

Conference Papers

Long X; Tan KH; Lee CK, 2014, 'Finite element formulation of three dimensional reinforced column joint', Yogyakarta, Indonesia, presented at The 1st AUN/SEED-Net Regional Conference on Natural Disaster, Yogyakarta, Indonesia, 22 January 2014 - 23 January 2014

Chiew SP; Lee CK; Zhao MS; Jin YF; Cai YQ; Chen C, 2014, 'Intensification of low density development - Functional bridging buildings', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 47 - 59

Zhao MS; Jin YF; Lee CK; Chiew SP, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints - Part II: Ultimate strength', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 397 - 402

Jin YF; Zhao MS; Lee CK; Chiew SP, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints-Part I: Influence of heat treatment', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 251 - 258

Lee CK; Xu J; Fan SC, 2013, 'A study on the cloud effect on debris trajectory', Singapore, presented at The 5th Asia Pacific Congress On Computational Mechanics (APCOM) and 4th International Symposium On Computational Mechanics (ISCM), Singapore, 11 December 2013 - 14 December 2013

Xu J; Lee CK; Fan SC, 2013, 'Numerical modeling on concrete debris ricocheting off sand ground', Singapore, presented at The 5th Asia Pacific Congress On Computational Mechanics (APCOM) & 4th International Symposium On Computational Mechanics (ISCM), Singapore, 11 December 2013 - 13 December 2013

Fan SC; Yu JQ; Lee CK, 2013, 'Simulation of Fracture/breakup of Concrete Magazine using Cohesive Element', Madrid, Spain, presented at The 7th International Conference on Advanced Computational Engineering and Experimenting (ACEX2013), Madrid, Spain, 01 July 2013 - 04 July 2013

Long X; Tan KH; Lee CK, 2013, 'Analytical model on the bond stress-slip relationship between steel reinforcement and concrete for RC beam-column joints', in Applied Mechanics and Materials, pp. 1212 - 1218, http://dx.doi.org/10.4028/www.scientific.net/AMM.275-277.1212

Zhao MS; Chiew SP; Lee CK, 2013, 'Fatigue behavior of rectangular built-up hollow section joint made of high strength steel s690', in Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2013

Fan SC; Yu QJ; Lee CK, 2012, 'Plenary speech: Challenges in simulation of break-up of concrete magazine and the debris throw', Crowne Plaze, Gold Coast, Australia, presented at The 4th International Conference on Computational Methods (ICCM2012), Crowne Plaze, Gold Coast, Australia, 25 November 2012 - 28 November 2012, http://dx.doi.org/10.26190/unsworks/26381

Long X; Tan KH; Lee CK, 2012, 'A 3D co-rotational beam element with geometric and material nonlinearities for steel and RC framed structures', Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 June 2012 - 22 June 2012

Fan SC; Li Y; Lee CK, 2012, 'Numerical simulation of blast debris ricocheting off sandy ground surface', Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 June 2012 - 22 June 2012

Long X; Bao JQ; Tan KH; Lee CK, 2012, 'Parametric study on RC beam-column subassemblages under column-removal scenarios by fibre beam elements in FEMFAN3D', Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 June 2012 - 22 June 2012

Jin YF; Zhao MS; Lee CK; Chiew SP, 2012, 'Influence of welding on high strength steel plate-toplate Y-Joints part I: Simulation of residual stress', in 11th International Conference on Steel Space and Composite Structures, pp. 243 - 248

Zhao MS; Jin YF; Lee CK; Chiew SP, 2012, 'Influence of welding on high strength steel plate-toplate Y-joints part II: Simulation of heat affected zone', in 11th International Conference on Steel Space and Composite Structures, pp. 311 - 315

Chiew SP; Jiang J; Lee CK, 2012, 'Residual stress investigation of welded high strength steel box T-joints', in Tubular Structures XIV - Proceedings of the 14th International Symposium on Tubular Structures, ISTS 2012, pp. 141 - 147, http://dx.doi.org/10.1201/b13139-23

Jiang J; Lee CK; Chiew SP; Zhao MS, 2011, 'Numerical modeling of residual stress distributions in high strength steel plate-to-plate T and Y joint', Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 July 2011 - 15 July 2011

Jinag J; Lee CK; Chiew SP, 2011, 'Residual Stress Distributions of High Strength Steel Plate-to-Plate T and Y Joints', Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 July 2011 - 15 July 2011

Chiew SP; Yu Y; Lee CK; Jiang J, 2011, 'Ultimate strength of high strength steel welded plate-to-plate joints', Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 July 2011 - 15 July 2011

Chiew SP; Jiang J; Lee CK, 2011, 'Influence of Residual Stress on Stress Concentration of High Strength Steel Plate-to-Plate Joints', Singapore, pp. 189 - 198, presented at The Professor LEE SENG LIP Symposium: A tribute to his contributions in Civil Engineering -Research, Education and Practice, Singapore, 21 March 2011 - 22 March 2011

Chiew SP; Jiang J; Lee CK; Yu Y, 2011, 'Effect of residual stress on stress concentration of high strength steel plate-to-plate joints', in 10th International Conference on Steel Space and Composite Structures, pp. 127 - 135

Xu J; Tan KH; Li ZX; Lee CK, 2010, 'A Co-rotation shell element with material nonlinearities', in Civil-Comp Proceedings

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section k-joints', in ICASS '09/IJSSD - Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics, pp. 602 - 611

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2008, 'Fatigue modeling for partially overlapped CHS K-joints with surface crack', Shanghai, China, pp. 119 - 126, presented at The 12th International Symposium on Tubular Structures (ISTS 12), Shanghai, China, 08 October 2008 - 10 October 2008

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2008, 'Hierarchical modelling tools for fatigue analysis of partially overlapped circular hollow section k-joints', Singapore, pp. 132 - 152, presented at The 2nd International Symposium on Advances in Steel and Composite Structures, Singapore, 01 August 2008 - 01 August 2008

Lee CK; Lie ST; Chiew SP, 2007, 'Finite element modellings of tubular joints for fatigue assessment', Singapore, presented at International Symposium on Fatigue and Fracture of Steel Structures, Singapore, 04 December 2007 - 04 December 2007

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2007, 'Experimental studies on stress concentration factors for partially overlapped Circular Hollow Section K-joints', in 5th International Conference on Advances in Steel Structures, ICASS 2007, pp. 986 - 991

Chiew SP; Lee CK; Lie ST; Nguyen TBN; Sopha T, 2007, 'Fatigue behaviour of partially overlapped CHS K-joints', in Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007, pp. 145 - 152

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2007, 'Experimental studies on fatigue behavior of Partially Overlapped Circular Hollow Section K-joints', Singapore, presented at The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, 26 September 2007 - 28 September 2007

Chiew SP; Lee CK; Lie ST; Nguyen TBN; Sopha T, 2007, 'Mesh Generation for Partially Overlapped Circular Hollow Section K-Joints under Fatigue Loadings', Singapore, presented at The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, 26 September 2007 - 28 September 2007

Lee CK; Lie ST; Chiew SP; Sopha T; Nguyen TBN, 2007, 'Experimental studies on stress distributions for partially overlapped CHS K-joints', in Proceedings of the 9th International Conference on Steel, Space and Composite Structures, pp. 389 - 394

Chiew SP; Lie ST; Lee CK; Ji HL, 2006, 'Crack surface under weld toe in square hollow section T-joints', in Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures, pp. 621 - 628

Lee CK; Lie ST; Chiew SP; Sopha T; Nguyen TBN, 2006, 'An experimental study on the fatigue behaviour of partially overlapped CHS K-Joints', Kuala Lumpur, Malaysia, pp. 273 - 279, presented at The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, 15 May 2006 - 17 May 2006

Chiew SP; Lee CK; Lie ST; Nguyen NTB, 2006, 'Geometrical Modeling of overlap K-joints', Kuala Lumpur, Malaysia, pp. 425 - 434, presented at The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, 15 May 2006 - 17 May 2006

Chiew SP; Lie ST; Lee CK; Ji HL, 2005, 'Large-Scale Fatigue Tests on Square Tubular T-joints', in Proceedings of Advances in Experimental Structural Engineering, Nagoya, Japan, presented at Advances in Experimental Structural Engineering (AESE 2005), Nagoya, Japan, 17 July 2005 - 21 July 2005

Chiew SP; Lie ST; Lee CK; Yu Y, 2005, 'Debonding Failure Model for FRP Retrofitted Steel Beams', Shanghai, China, presented at The 4th International Conference on Advances in Steel Structures, Shanghai, China, 13 June 2005 - 15 June 2005

Chiew SP; Lee CK; Lie ST; Ji HL, 2005, 'Numerical Modelling of Square Tubular T-Joints with a Surface Crack at Corner', Shanghai, China, presented at The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai, China, 13 June 2005 - 15 June 2005

Lie ST; Chiew SP; Lee CK; Yang ZM, 2005, 'The Ultimate Behaviour of Cracked Square Hollow Section T-joints', Shanghai China, presented at The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai China, 13 June 2005 - 15 June 2005

Lie ST; Lee CK; Chiew SP; Yang ZM, 2004, 'Numerical Models in Linear and Non-linear FE Analysis of Cracked Rectangular Hollow Section Joints', Singapore, presented at The International Conference of Computational Methods, Singapore, 15 December 2004 - 17 December 2004

Lie ST; Lee CK; Chiew SP; Shao YB, 2004, 'Validation of Stress Intensity Factors of a Surface Crack in Tubular K-joints', Perth, Australia, presented at The 18th Australian Conference on the Mechanics of Structures and Materials, Perth, Australia, 01 December 2004 - 03 December 2004

Chiew SP; Lie ST; Lee CK; Huang ZW, 2003, 'Parametric Equations for Stress Intensity Factors of Cracked Tubular T&Y-Joints', in Proceedings of the International Offshore and Polar Engineering Conference, pp. 2505 - 2512

Shuai YY; Lee CK, 2003, 'A new stress recovery and a posteriori error estimation scheme for RKPM', Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September 2003 - 01 October 2003

Xu QX; Lee CK, 2003, 'An automatic adaptive mesh generator for 3D thin-walled structures', Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September 2003 - 01 October 2003

Lo SH; Lee CK, 2003, 'Surface intersection by tracing of neighbours', Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September 2003 - 01 October 2003

Lie ST; Chiew SP; Lee CK; Shao YB , 2003, 'Estimation of Stress Intensity Factors of Weld Toe Surface Cracks in Tubular K-Joints', Madrid, Spain, pp. 347 - 355, presented at The 10th International Symposium on Tubular Structures, Madrid, Spain, 18 September 2003 - 20 September 2003

Chiew SP; Lie ST; Lee CK; Ji HL, 2003, 'Fatigue Analysis of Square-to-Square Tubular T-Joint with Surface Crack', Madrid, Spain, pp. 375 - 382, presented at The 10th International Symposium on Tubular Structures, Madrid, Spain, 18 September 2003 - 20 September 2003

Chiew SP; Lie ST; Lee CK; Huang ZW, 2003, 'Parametric equations for stress intensity factors of cracked tubular T&Y-joints', in Chung JS; Wardenier J; Frederking RMW; Koterayama W (eds.), PROCEEDINGS OF THE THIRTEENTH (2003) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, HI, HONOLULU, pp. 255 - 262, presented at 13th International Offshore and Polar Engineering Conference (ISOPE-2003), HI, HONOLULU, 25 May 2003 - 30 May 2003, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000223143100037&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Lie ST; Chiew SP; Lee CK; Shao YB, 2002, 'Estimation of stress intensity factors of weld toe surface cracks in tubular K-joints', Singapore, pp. 223 - 230, presented at The 7th International conference on steel & space structures, Singapore, 02 October 2002 - 03 October 2002

Chiew SP; Lie ST; Ji HL; Lee CK, 2002, 'Stress analysis of square-to-square tubular T-joint under combined loads', Singapore, pp. 199 - 206, presented at The 7th International conference on steel and space structures, Singapore, 02 October 2002 - 03 October 2002

Liu X; Fan SC; Lee CK, 2001, 'The Enriched Partition-of-Unity finite element methods for stress-intensity factors computations', Singapore, presented at The Eighth East Asia-Pacific Conference on Structural Engineering & Construction, Singapore, 05 December 2001 - 07 December 2001

Back to profile page