By Professor Faz Rahman

Conference Papers

Chong GL; Dutta R; Rahman MF; Lovatt H, 2011, 'Experimental verification of core and magnet losses in a concentrated wound IPM machine with V-shaped magnets used in field weakening applications', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 977 - 982, presented at 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, Niagara Falls, ON, Canada, 15 May 2011 - 18 May 2011, http://dx.doi.org/10.1109/IEMDC.2011.5994949

Ravishankar J; Rahman MF, 2010, 'Dynamic compensators for grid connected wind farms', in 2010 Joint International Conference on Power Electronics, Drives and Energy Systems, PEDES 2010 and 2010 Power India, IEEE, Piscataway, USA, pp. 1 - 6, presented at 2010 Joint International Conference on Power Electronics, Drives and Energy Systems, PEDES 2010 and 2010 Power India, New Delhi, India, 20 December 2010 - 23 December 2010

Ravishankar J; Rahman MF, 2010, 'Performance Enhancement of Grid Connected Wind Energy Conversion Systems', IEEE, Cairo, presented at Fourteenth International Middle East Power Systems Conference, Cairo, 19 December 2010 - 21 December 2010, http://www.sdaengineering.com/MEPCON10/Papers/116.pdf

Chong GL; Dutta R; Rahman MF; Nguyen QD; Lovatt H, 2010, 'Comparison of Concentrated and Distributed Windings in an IPM Machine for Field Weakening Applications', in 2010 20th Australasian Universities Power Engineering Conference (AUPEC 2010), IEEE, Piscataway, NJ, USA, pp. 1 - 5, presented at Australasian Universities Power Engineering Conference (AUPEC), Christchurch, New Zealand, 05 December 2010 - 08 December 2010

Rahman MF; Xiao D, 2010, 'Low Speed and Standstill Operation of Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Fed by Matrix Converter', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, pp. 142 - 147, presented at Proceeding of the International Conference on Electrical Machines and Systems (ICEMS), Incheon, South Korea, 10 October 2010 - 13 October 2010

Rahman MF; Xiao D, 2010, 'Performance Improvement of a Sensorless Hysteresis Direct Torque Controlled Matrix Converter IPM Synchronous Motor Drive Using a Modified Switching Pattern and an Input Power Factor Correction', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, pp. 736 - 741, presented at Proceeding of the International Conference on Electrical Machines and Systems (ICEMS), Incheon, South Korea, 10 October 2010 - 13 October 2010

Xiao D; Foo GH; Rahman MF, 2010, 'A new combined adaptive flux observer with HF signal injection for sensorless direct torque and flux control of matrix converter fed ipmsm over a wide speed range', in 2010 IEEE Energy Conversion Congress and Exposition, ECCE 2010 - Proceedings, IEEE, New York, pp. 1859 - 1866, presented at 2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010, Atlanta, GA, 12 September 2010 - 16 September 2010, http://dx.doi.org/10.1109/ECCE.2010.5618149

Xiao D; Rahman MF, 2010, 'A novel sensorless hysteresis direct torque control for matrix converter fed interior permanent magnet synchronous motor', in IEEE PES General Meeting, PES 2010. Article number 5590220, IEEE, USA, presented at IEEE PES General Meeting, PES 2010, Minneapolis, MN, 25 July 2010 - 29 July 2010, http://dx.doi.org/10.1109/PES.2010.5589533

Chong GL; Dutta R; Rahman MF, 2010, 'Field Weakening Performance of a Concentrated Wound PM Machine with Rotor and Magnet Geometry Variation', in Proceedings of general meeting of Power and Energy Society (PES),, IEEE, Minneapolis, USA, pp. 1 - 4, presented at Power and Energy Society General Meeting, 2010 IEEE, Minneapolis, MN, 25 July 2010 - 29 July 2010, http://dx.doi.org/10.1109/PES.2010.5589868

Xiao D; Rahman MF, 2010, 'Sensorless direct torque and flux control for matrix converter-fed interior permanent magnet synchronous motor using adaptive sliding mode observer', in IEEE PES General Meeting, PES 2010. Article number 5590220, IEEE, USA, pp. 1 - 5, presented at IEEE PES General Meeting, PES 2010, Minneapolis, MN, 25 July 2010 - 29 July 2010, http://dx.doi.org/10.1109/PES.2010.5589727

Chong GL; Dutta R; Rahman MF, 2010, 'Design of a Highly Efficient 1kW IPM Machine with a Very Wide Constant Power Speed Range', in Proceedings of International Power Electronics Conference -ECCE-Asia (IPEC),, IEEE, Japan, pp. 1956 - 1961, presented at International Power Electronics Conference -ECCE-Asia (IPEC), Japan, 21 June 2010 - 24 June 2010, http://ieeexplore.ieee.org/Xplore/dynhome.jsp

Rahman MF; Xiao D, 2010, 'Implementation of sensorless direct torque control using matrix converter fed Interior Permanent Magnet Synchronous Motor', in The Institute of Electrical Engineers of Japan, IEEE, Japan, pp. 3065 - 3071, presented at Proceeding of the International Power Electronics Conference (IPEC), Hokkaido, Japan, 21 June 2010 - 24 June 2010

Chong GL; Dutta R; Rahman MF, 2010, 'A Comparative Study of Rotor Losses in an IPM with Single and Double Layer Concentrated Windings', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, presented at International Conference on Electrical Machines and Systems (ICEMS), Korea

Rahman MA; Zhou P; Lin D; Rahman MF, 2009, 'Measurement of parameters for interior permanent magnet motors', in 2009 IEEE Power and Energy Society General Meeting, PES '09, http://dx.doi.org/10.1109/PES.2009.5275584

Xiao D; Rahman F, 2009, 'A modified DTC for matrix converter drives using two switching configurations', in 2009 13th European Conference on Power Electronics and Applications, EPE '09

Xiao D; Rahman F, 2009, 'An improved DTC for matrix converter drives using multi-mode ISVM and unity input power factor correction', in 2009 13th European Conference on Power Electronics and Applications, EPE '09

Foo G; Goon CS; Rahman MF, 2009, 'Analysis and design of the SVM direct torque and flux controlled IPM synchronous motor drive', in AUPEC'09 - 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems

Foo G; Rahman MF, 2009, 'Direct torque and flux controlled IPM synchronous motor drive using a hybrid signal injection and adaptive sliding mode observer', in IEEE Region 10 Annual International Conference, Proceedings/TENCON, http://dx.doi.org/10.1109/TENCON.2009.5396027

You K; Rahman F, 2009, 'Over-voltage protection using power Zener diode for matrix converter and matrix-Z-source converter', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 193 - 197, http://dx.doi.org/10.1109/PEDS.2009.5385725

Foo G; Rahman MF, 2009, 'Wide-speed direct torque and flux controlled interior permanent-magnet synchronous motor drive using a combined adaptive sliding-mode observer and high-frequency signal injection', in 2009 8th International Symposium on Advanced Electromechanical Motion Systems and Electric Drives Joint Symposium, ELECTROMOTION 2009, http://dx.doi.org/10.1109/ELECTROMOTION.2009.5259125

Rahman MF; Foo GH, 2009, 'An Extended Rotor Flux Model for Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drives', IEEE, Singapore, presented at 29th IEEE International conference on Electrical and Electronic Technology, Singapore, 23 November 2009 - 26 November 2009

Rahman MF; Foo GH, 2009, 'A Hybrid Signal Injection and Sliding Mode Observer for Direct Torque and Flux Controlled IPMSM Drive', IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Thermal Considerations of an Interior Permanent Magnet Machine with Conctrated Windings', in Electrical Machines and Systems, 2009. ICEMS 2009. International Conference on, IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Foo GH; Soon , 2009, 'Design of the Direct Torque and Flux Control Scheme for IPM Synchronous Motor Drive', in Design of the Direct Torque and Flux Control Scheme for IPM Synchronous Motor Drive, IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Foo GH; Soon , 2009, 'Analysis and Design of the SVM Direct Torque and Flux Controlled IPM Synchronous Motor Drive', IEEE, Adelaide, pp. 1 - 6, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5356588

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Mechanical Consideration of an IPM Machine with Concentrated Windings', in AUPEC'09 - 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems, IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Rahman MF; Foo GH, 2009, 'Direct Torque and Flux Controlled IPM Synchronous Motor Drive Using a Hybrid Signal Injection and Adaptive Sliding Mode Observer', IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Phung BT; Shao S; Chu M; Vickers C; Rahman MF, 2009, 'Partial Discharge Measurements in PWM Inverter-Driven Low-Voltage Motors', IEEE, Adelaide, Australia, presented at 19th Australasian Universities Power Engineering Conference (AUPEC 2009), Adelaide, Australia, 27 September 2009 - 30 September 2009

Rahman MF; Foo GH, 2009, 'Sensorless Direct Torque and Flux Control of IPM Synchronous Motor Drives using An Extended Rotor Flux Model', IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Rahman MF; Xiao D; Foo GH, 2009, 'Sensorless Direct and Torque Flux Control Matrix Converter Driven IPM Synchronous Motor Drive using Adpative Sliding Mode Observer Combined with High-Frequency Signal Injection', IEEE, San Jose, USA, presented at ECCE 2009, San Jose, USA, 20 September 2009 - 24 September 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of IPM machine with Concentrated Windings for Vehicular Applications', in EPE 2009 Barcelona, IEEE, Barcelona, Spain, presented at European Power Engineering Conference, Barcelona, Spain, 08 September 2009 - 10 September 2009

Rahman MF; Foo GH, 2009, 'An Extended Rotor Flux Model for Sensorless Direct Torque and Flux control of IPM Synchronous Motor Drives', Lille, France, presented at ELECTROMOTION, Lille, France, 01 July 2009 - 03 July 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications', in Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications, IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Rahman MF; Foo GH, 2009, 'Direct Torque and Flux Control of an IPM Synchronous Motor Drive Using a Back-Stepping Approach', IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Rahman MF; Foo GH, 2009, 'Sensorless Adaptive Sliding Mode Control of an IPM Synchronous Motor Drive Using a Sliding Mode Observer and HF Signal Injection', IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Xiao D; Rahman MF, 2008, 'A Modified Direct Torque Control for Matrix Converter Drives', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'An Extended Kalman Filter for Sensorless Direct Torque Controlled IPM Synchronous Motor Drive', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Xiao D; Rahman MF, 2008, 'An Improved Direct Torque Contraol for Matrix Converter Driven Interior Permanent Magnet Synchronous Motor', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-slot Cencentrated Windings, Part I : Open-circuit Analysis', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-Slot Concentrated Windings, Part II: Including Armature Reaction', in Australasian Universities Power Engineering Conference (AUPEC 2008), The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'Rotor Position and Speed Estimation of Variable of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive at Very Low Speeds', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Foo G; Sayeef S; Rahman MF, 2008, 'An extended Kalman filter for sensorless direct torque controlled IPM synchronous motor drive', in 2008 Australasian Universities Power Engineering Conference, AUPEC 2008

Chong L; Dutta R; Rahman MF, 2008, 'Open circuit analysis of concentrated winding in interior permanent magnet machines with fractional slot distribution', in IET Conference Publications, pp. 235 - 239, http://dx.doi.org/10.1049/cp:20080518

Abdullah J; Mohamad GHP; Hamzah MA; Yusof MSM; Rahman MFA; Ismail F, 2008, 'Portable computed tomographic system for in-situ inspection of industrial pipelines', in Emerging Technologies in ETNDT - Proceedings of the 4th International Conference on Emerging Technologies in Non-Destructive Testing, ETNDT 4, pp. 211 - 214

Foo G; Sayeef S; Rahman MF, 2008, 'Sensorless direct torque and flux control of an IPM synchronous motor at low speed and standstill', in PECon 2008 - 2008 IEEE 2nd International Power and Energy Conference, pp. 277 - 282, http://dx.doi.org/10.1109/PECON.2008.4762484

Foo G; Sayeef S; Rahman MF, 2008, 'SVM direct torque controlled interior permanent magnet synchronous motor drive using an extended Kalman filter', in IET Conference Publications, pp. 712 - 716, http://dx.doi.org/10.1049/cp:20080614

Foo G; Sayeef S; Rahman MF, 2008, 'Wide speed operation of a direct torque and flux controlled IPM synchronous motor drive without a mechanical sensor', in 2008 IEEE International Conference on Sustainable Energy Technologies, ICSET 2008, pp. 1244 - 1249, http://dx.doi.org/10.1109/ICSET.2008.4747197

Foo GH; Sayeef SM; Rahman MF, 2008, 'Wide Speed Sensorless SVM Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive', in Proceedings IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society, The Institute of Electrical and Electronics Engineers (IEEE),IEEE Industrial Electronics Society (IES), Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA, presented at 34th Annual Conference of the IEEE Industrial Electronics Society, Orlando, Florida USA, 10 November 2008 - 13 November 2008

Karanayil BV; Grantham C; Rahman MF, 2008, 'Induction Motor Parameter Determination Technique using Artificial Neural Network', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Xiao D; Rahman MF, 2008, 'Performance Improvement of Matrix Converter using a Modified Indirect Space Vector Modulation', in ICEMS 2008 International perference on Electrical Machines & Systems, ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Back to profile page