By Professor Faz Rahman

Conference Papers

Chong GL; Rahman MF, 2008, 'Saliency Ratio Optimization in an IPM Machine with Fractional-slot Concentrated Windings', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'Sensorless Direct and Indirect Torque Control of an IPM Synchronous Motor Drive at Very Low Speed using Carrier Signal Injection', in ICEMS 2008 International perference on Electrical Machines & Systems, ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'Very Low Speed Operation of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive Using Combined HF Signal Injection and Sliding Observer', in Proceedings of the XVIII International Conference of Electrical Machines. (ICEM), Vilamoura, Portugel, presented at XVIII International Conference On Electrical Mchines (Icem), Vilamoura, Portugel, 06 September 2008 - 09 September 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'Sensorless Direct Torque and Flux Control of an IPM Synchronous Motor at Low Speed and Standstill', in 2008 13TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROLCONFERENCE, VOLS 1-5, Poznan Poland, presented at 13th International Power Electronics and Motion Control Confernece, 2008, Poznan Poland, 01 September 2008 - 03 September 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Open-circuit analysis of concentrated winding in interior permanent magnet machines', in UKACC International Conference on Control 1998, 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

Sayeef SM; Foo GH; Rahman MF, 2008, 'SVM Direct Torque Contol of IPM Synchronous Motor at Very Low Speed', in UKACC International Conference on Control 1998, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

Foo GH; Sayeef SM; Rahman MF, 2008, 'SVM Direct Torque Control of IPM Synchronous Machine Drive using an Entended Kalman Filter', in UKACC International Conference on Control 1998, 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

You K; Rahman MF, 2008, 'A matrix-Z-source converter for automotive integrated starter alternator system', in Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, Austin, Texas, presented at 23rd Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2008, Austin, Texas, 24 February 2008 - 28 February 2008

Foo G; Sayeef S; Rahman MF, 2008, 'Sensorless direct torque and flux control of an ipm synchronous motor drive at low speed and standstill', in 2008 Australasian Universities Power Engineering Conference, AUPEC 2008

Chong GL; Rahman MF, 2008, 'Comparison of d- and q-axis Inductances in an IPM Machine with Integral-slot Distributed and Fractional-slot Concentrated Windings', in ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4, Ieee, New York, presented at ICEM: 2008 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES, VOLS 1- 4

Rahman MF; Sayeef SM; Foo GH, 2007, 'Analysis of PI-DTC in a segmented interior permanent magnet machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007

Rahman MF; Dutta RD; Chong GL, 2007, 'Application of concentrated windings in interior permanent magnet machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007

Rahman MF; Sayeef SM; Foo GH, 2007, 'Sensorless SVM direct torque controlled interior permanent magnet synchronous drive', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007

Sayeef SM; Rahman MF; Foo GH, 2007, 'Vector based voltage compensation for improved low speed performance of a PI-DTC Interior PM machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007

To HP; Rahman MF; Grantham C, 2007, 'Time delay compensation for a DSP-based current-source converter using observer-predictor controller', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1091 - 1096, http://dx.doi.org/10.1109/PEDS.2007.4487840

Rahman M; Gillespie JA; Darveniza M; Saha TK, 2007, 'Transmission line performance against lightning investigated using FLASH 1.81', in 2007 Australasian Universities Power Engineering Conference, AUPEC, http://dx.doi.org/10.1109/AUPEC.2007.4548047

You K; Rahman MF, 2007, 'Analysis of conduction and switching losses of a matrix-Z-source converter', in 7th Internatonal Conference on Power Electronics, ICPE 2007, Daegu, Korea, presented at ICPE`07, Daegu, Korea, 22 October 2007 - 26 October 2007

Sayeef SM; Rahman MF, 2007, 'improved low speed performance of a PI-DTC interior PM machine with compensations of dead-time effects and forward voltage drops', in 7th Internatonal Conference on Power Electronics, ICPE 2007, Daegu, Korea, presented at ICPE`07, Daegu, Korea, 22 October 2007 - 26 October 2007

Dutta RD; Sayeef SM; Rahman MF, 2007, 'Analysis of cogging torque and its effect on direct torque control (DTC) in a segmented interior permanent magnet machine', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, presented at IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, 17 June 2007 - 21 June 2007

Rahman MF; Xu ZZ; Xu DX, 2007, 'Comparative study of an adaptive sliding observer and an EKF for speed sensor-less DTC IPM synchronous motor drives', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, presented at IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, 17 June 2007 - 21 June 2007

Sayeef SM; Rahman MF, 2007, 'Comparison of proportional+Integral control and variable structure control of Interior permanent magnet synchronous motor drives', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, presented at IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, 17 June 2007 - 21 June 2007

Dutta RD; Sayeef SM; Rahman MF, 2007, 'Cogging torque analysis of a segmented interior permanent magnet machine', in International Electric Machines and Drives Conference, Antalya, Turkey, presented at International Electric Machines and Drives Conference 2007, Antalya, Turkey, 03 May 2007 - 05 May 2007

Rahman MF; Haque M, 2007, 'Control trajectories for interior permanent magnet synchronous motor drives', in International Electric Machines and Drives Conference, Antalya, Turkey, presented at International Electric Machines and Drives Conference 2007, Antalya, Turkey, 03 May 2007 - 05 May 2007

Rahman MF; Sayeef SM, 2006, 'A comparative analysis of two direct torque control strategies for interior permanent magnet synchronous motor drives', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; You K, 2006, 'Analysis of conduction and switching losses of a matrix-Z-source converter for automotive ISA 42 V System', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Haque M, 2006, 'Dynamic model and parameter measurement of interior permanent magnet synchronous motor', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Dutta RD, 2006, 'Experimental verification of a segmented magnet interior permanent magnet machine (IPM) with wide constant power speed range (CPSR)', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Zhang J, 2006, 'Non-linear behaviour compensation of the converter for direct torque controlled induction machines', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Xiao D, 2006, 'Variable-structure direct torque control for matrix converter-fed interior permanent magnet synchronous machine drives', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Dutta RD, 2006, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', in 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, presented at 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 07 November 2006 - 10 November 2006

Rahman MF; You K, 2006, 'Modulations for three-phase AC-DC voltage source rectification and DC-Three-Phase AC voltage source inversion using general direct space vector approach', in 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, presented at 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 07 November 2006 - 10 November 2006

Rahman MF; Zhang J, 2006, 'A sliding mode flux observer for direct torque controlled integrated starter/alternator', in 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, presented at 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, 08 October 2006 - 12 October 2006

You K; Rahman MF, 2006, 'Application of general space vector modulation approach of AC-AC matrix converter theory to a new bidirectional converter for ISA 42 V system', in 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, presented at 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, 08 October 2006 - 12 October 2006

Rahman MF; You K, 2006, 'Constructing a novel power converter by matrix converter theory and Z-source inverter concepts for ISA 42V powernet system', in 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, presented at 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, 08 October 2006 - 12 October 2006

Mudannayake CP; Rahman MF, 2006, 'Control design of an induction machine based integrated starter alternator for 42V powernet', in 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, presented at 41st IEEE Industrial Applications Society Annual Meeting 2006, Tampa, Florida, USA, 08 October 2006 - 12 October 2006

Rahman MF; Grantham C; Zhang J, 2006, 'A new scheme to direct torque control of interior permanent magnet synchronous machine drives for constant inverter switching frequency and low torque ripple', in 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, presented at 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, 14 August 2006 - 16 August 2006

Rahman MF; Xiao D, 2006, 'Direct torque control for interior permanent magnet synchronous motors using matrix converters', in 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, presented at 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, 14 August 2006 - 16 August 2006

Rahman MF; Xiao D, 2006, 'Direct torque control of an interior permanent magnet synchronous machine fed by a direct AC-AC converter', in 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, presented at 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, 14 August 2006 - 16 August 2006

Rahman MF; You K, 2006, 'Modulations for voltage source rectification and voltage source inversion using direct space vector approach', in 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, presented at 5th CES/IEEE International Power Electronics and Motion Control Conference (IPEMC06), Shanghai, china, 14 August 2006 - 16 August 2006

Rahman MF; You K, 2006, 'Modulations for voltage source rectification and voltage source inversion based on general direct space vector modulation approach of AC-AC matrix converter theory', in ISIE 2006 international symposium on industrial electronics, Montreal, Canada, presented at ISIE 2006 international symposium on industrial electronics, Montreal, Canada, 09 July 2006 - 13 July 2006

Xiao D; Rahman MF, 2006, 'A modified direct torque control for a matrix coverter-fed interior permanent magnet synchronous machine drive', in 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, presented at 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, 18 June 2006 - 22 June 2006

You K; Rahman MF, 2006, 'Analytical comparison of conduction and switching losses of a novel matrix-z-source converter and a conventional VSI converter for automotive ISA 42 V system', in 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, presented at 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, 18 June 2006 - 22 June 2006

Zhang J; Rahman MF, 2006, 'Efficiency-optimized direct torque controlled integrated starter/alternator with power factor tuning', in 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, presented at 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, 18 June 2006 - 22 June 2006

To HP; Rahman MF; Grantham C, 2006, 'Modulation of current-source converters from gating signals for voltage-source converters', in 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, presented at 37th IEEE Power Electronics Specialists Conference, Jeju Island, Korea, 18 June 2006 - 22 June 2006

You K; Rahman MF, 2005, 'A New Power Converter Based on Z-source and Matrix Converters for ISA 42V PowerNet System', in 2nd National Power Electronics Conference, 2nd National Power Electronics Conference, Calcutta, India, presented at 2nd National Power Electronics Conference, Calcutta, India, 22 December 2005 - 24 December 2005

Dutta RD; Rahman MF, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine and Its Control', in 2nd National Power Electronics Conference, 2nd National Power Electronics Conference, Calcutta, India, presented at 2nd National Power Electronics Conference, Calcutta, India, 22 December 2005 - 24 December 2005

Zhang J; Xu Z; Tang L; Rahman MF, 2005, 'A Novel Direct Load Angle Control for Interior Permanent Magnet Synchronous Machine Drives with Space Vector Modulation', in Rumzi N; Indris N (ed.), 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, pp. 607 - 611, presented at International Conference on Power Electronics and Drive Systems 2005, Kuala Lumpur, Malayasia, 28 November 2005 - 01 December 2005

Dutta RD; Rahman MF, 2005, 'Comparison of Core Loss Prediction Methods for the Interior Permanent Magnet Machine', in Rumzi N; Indris N (ed.), 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, pp. 1396 - 1401, presented at International Conference on Power Electronics and Drive Systems 2005, Kuala Lumpur, Malayasia, 28 November 2005 - 01 December 2005

You K; Rahman MF, 2005, 'Modulation and Control Schemes for A New Power Converter Based on Z-source and Matrix Converter for ISA 42 V PowerNet System', in 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, presented at International Conference on Power Electronics and Drive Systems 2005, Kuala Lumpur, Malayasia, 28 November 2005 - 01 December 2005

Xu Z; Rahman MF, 2005, 'An Improved Stator Flux Estimation for a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive Using a Sliding Observer', in 2005 IEEE Industry Applications Conference Fortieth IAS Annual Meeting, Kowloon, Hong Kong, presented at IEEE Industry Applications Conference Fortieth IAS Annual Meeting 2005, Kowloon, Hong Kong, 02 October 2005 - 06 October 2005

Back to profile page