By Professor Faz Rahman

Journal articles

Dutta R; Chong L; Rahman MF; Rahman F, 2014, 'Review of the impact of parameter variation on the operating speed range of the interior permanent magnet synchronous machine', Australian Journal of Electrical & Electronic Engineering, 11, pp. 10 - 17, https://www.tandfonline.com/doi/abs/10.7158/1448837X.2014.11464409

You K; Xiao D; Rahman MF; Uddin MN, 2014, 'Applying reduced general direct space vector modulation approach of AC-AC matrix converter theory to achieve direct power factor controlled three-phase AC-DC matrix rectifier', IEEE Transactions on Industry Applications, 50, pp. 2243 - 2257, http://dx.doi.org/10.1109/TIA.2013.2285956

Dutta R; Chong L; Rahman MF, 2013, 'Analysis and experimental verification of losses in a concentrated wound interior permanent magnet machine', Progress In Electromagnetics Research B, 48, pp. 221 - 248, http://www.jpier.org/PIERB/pier.php?paper=12110715

Dutta R; Chong L; Rahman MF, 2013, 'Design and experimental verification of an 18-slot/14-pole fractional-slot concentrated winding interior permanent magnet machine', IEEE Transactions on Energy Conversion, 28, pp. 181 - 190, http://dx.doi.org/10.1109/TEC.2012.2229281

Xiao D; Rahman MF, 2013, 'Sensorless direct torque and flux controlled IPM synchronous machine fed by matrix converter over a wide speed range', IEEE Transactions on Industrial Informatics, 9, pp. 1855 - 1867, http://www.scopus.com/inward/record.url?eid=2-s2.0-84886670952&partnerID=40&md5=9dc2710cb5632ebc8bc21c394851bd7f

Xu Z; Rahman MF, 2012, 'Comparison of a sliding observer and a Kalman filter for direct-torque-controlled IPM synchronous motor drives', IEEE Transactions on Industrial Electronics, 59, pp. 4179 - 4188, http://dx.doi.org/10.1109/TIE.2012.2188252

Xu Z; Rahman MM; Wang G; Xu DX, 2012, 'Performance evaluation of an integrated starter-alternator with an IPM synchronous machine under sensor-less operation', Journal of Power Electronics, 12, pp. 49 - 57, http://dx.doi.org/10.6113/JPE.2012.12.1.49

Dutta R; Rahman MF; Chong GL, 2012, 'Winding Inductances of an Interior Permanent Magnet (IPM) Machine With Fractional Slot Concentrated Winding', IEEE Transactions on Magnetics, 48, pp. 4842 - 4849, http://dx.doi.org/10.1109/TMAG.2012.2203140

Xiao D; Rahman MF, 2011, 'A Novel Hysteresis Direct Torque Control for Matrix Converter Drives', European Power Electronics and Drives EPE Journal, 21, pp. 40 - 48

Rahman MF; Foo GH; Soon , 2010, 'Analysis and Design of the SVM Direct Torque and Flux Controlled IPM Synchronous Motor drive', Australian Journal of Electrical and Electronics Engineering, 7, pp. 21 - 30

Rahman MF; Foo GH, 2010, 'Direct Torque Control of an IPM Synchronous Motor Drive at Very Low Speed Using a Sliding Mode Stator Flux Observer', IEEE Transactions on Power Electronics, 25, pp. 933 - 942

Chong GL; Dutta R; Rahman MF, 2010, 'Electromagnetic Losses in a 1kW Concentric Wound IPM Machine for Field Weakening Applications', Journal of Applied Superconductivity and Electromagnetics (JASEM), 1, pp. 95 - 100, http://association-asem.org/General_Information

Rahman MF; Foo GH; Sayeef SM, 2010, 'Low Speed and Standstill Operation of a Sensorless Direct Torque and Flux controlled IPM Synchronous Motor Drive', IEEE Transactions on Energy Conversion, 25, pp. 25 - 33

Rahman MF; Foo GH; Sayeef SM, 2010, 'Rotor Position and Speed Estimation of a Variable Structure Direct-Torque-Controlled IPM Synchronous Motor Drive at Very Low Speeds Including Standstill', IEEE Transactions on Industrial Electronics, 57, pp. 3715 - 3723, http://dx.doi.org/10.1109/TIE.2010.2041730

Rahman MF; Chong GL, 2010, 'Saliency ratio derivation and optimisation for an interior permanent magnet machine with concentrated windings using finite-element analysis', IET Electric Power Applications, 4, pp. 249 - 258

Rahman MF; Foo GH, 2010, 'Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drive at a Very Low Speed Without Signal Injection', IEEE Transactions on Industrial Electronics, 57, pp. 395 - 403, http://dx.doi.org/10.1109/TIE.2009.2030815

Rahman MF; Foo GH, 2010, 'Sensorless Sliding Mode MTPA Control of an IPM Synchronous Motor Drive Using a Sliding Mode Observer and HF Signal Injection', IEEE Transactions on Industrial Electronics, 57, pp. 1270 - 1278

Rahman MF; Foo GH, 2010, 'Sensorless Vector Control of Interior Permanent Magnet Synchronous Motor Drives at Very Low speed Without Signal Injection', IET Electric Power Applications, 4, pp. 131 - 139

Foo G; Rahman MF, 2009, 'Sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive over a wide speed range', Australian Journal of Electrical and Electronics Engineering, 6, pp. 121 - 132, http://dx.doi.org/10.1080/1448837x.2009.11464231

You K; Rahman MF, 2009, 'A matrix-Z-source converter with AC-DC bidirectional power flow for an integrated starter alternator system', IEEE Transactions on Industry Applications, 45, pp. 239 - 248

You K; Rahman MF, 2009, 'Analytical model of conduction and switching losses of matrix-Z-source converter', Journal of Power Electronics, 9, pp. 275 - 287

Chong GL; Dutta RD; Rahman MF, 2009, 'Application of concentrated windings in the interior permanent magnet machine', Australian Journal of Electrical and Electronics Engineering, 5, pp. 229 - 236

Mudannayake CP; Rahman MF, 2009, 'FUTURE AUTOMOTIVE 42-V POWERNET APPLICATION An improved implementation of an induction machine-based integrated starter alternator', IEEE Industry Applications Magazine, 15, pp. 14 - 25

Karanayil BV; Rahman MF; Grantham C, 2009, 'Identification of induction motor parameters in industrial drives with artificial neural networks', Advances in Fuzzy Systems

Rahman MF; Sayeef SM, 2009, 'Improved flux and torque estimators of a direct torque controlled interior PM machine with compensations for dead-time effects and forward voltage drops', Journal of Power Electronics, 9, pp. 438 - 446

Rahman MF; Haque M, 2009, 'Incorporating control trajectories with the direct torque control scheme of interior permanent magnet synchronous motor drive', IET Electric Power Applications, 3, pp. 93 - 101

Rahman MF; Sayeef SM; Foo GH, 2009, 'Rotor Position and Speed Estimation of a Variable Structure Direct Torque Controlled IPM Synchronous Motor Drive at Very Low Speed', Australian Journal of Electrical and Electronics Engineering, 6, pp. 271 - 280, http://search.informit.com.au/documentSummary;dn=166138239542266;res=IELENG

Foo G; Sayeef S; Rahman MF, 2009, 'Sensorless direct torque and flux control of an IPM synchronous motor drive at low speed and standstill', Australian Journal of Electrical and Electronics Engineering, 6, pp. 221 - 232, http://dx.doi.org/10.1080/1448837x.2009.11464240

Foo GH; Rahman MF, 2009, 'Sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive incorporating field weakening', Australian Journal of Electrical and Electronics Engineering, 5, pp. 137 - 148

Rahman MF; Foo GH, 2009, 'Sensorless Direct Torque Controlled IPM Synchronous Motor Drive over a Wide Speed Range', Australian Journal of Electrical and Electronics Engineering, 6

Rahman MF; Skyllas-Kazacos M, 2009, 'Vanadium redox battery: Positive half-cell electrolyte studies', Journal of Power Sources, 189, pp. 1212 - 1219, http://dx.doi.org/10.1016/j.powtdour.2008.12.113

Foo GH; Rahman MF, 2009, 'Wide speed direct torque and flux controlled IPM synchronous motor drive using a combined adaptive sliding mode observer and HF signal injection', Journal of Power Electronics, 9, pp. 582 - 592

Dutta RD; Rahman MF, 2008, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', IEEE Transactions on Energy Conversion, 23, pp. 25 - 33, http://dx.doi.org/10.1109/TEC.2007.905061

Zhang J; Rahman MF, 2007, 'A direct-flux-vector-controlled induction generator with space-vector modulation for integrated starter alternator', IEEE Transactions on Industrial Electronics, 54, pp. 2512 - 2520

Xu Z; Rahman MF, 2007, 'An adaptive sliding stator flux observer for a direct-torque-controlled IPM synchronous motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 2398 - 2406

Dutta RD; Rahman MF, 2007, 'Analysis and comparison of methods for determining d- and q-axes inductances of IPM machines', Australian Journal of Electrical and Electronics Engineering, 3, pp. 189 - 199

Xu Z; Rahman MF, 2007, 'Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach', IEEE Transactions on Power Electronics, 22, pp. 2487 - 2498

Karanayil BV; Rahman MF; Grantham C, 2007, 'Online stator and rotor resistance estimation scheme using artificial neural networks for vector controlled speed sensorless induction motor drive', IEEE Transactions on Industrial Electronics, 54, pp. 167 - 176, http://dx.doi.org/10.1109/TIE.2006.888778

Mudannayake CP; Rahman MF, 2007, 'Parameter determination of an induction machine for integrated starter alternator', Australian Journal of Electrical and Electronics Engineering, 3, pp. 91 - 100

Rahman MF; Dutta RD, 2006, 'A comparative analysis of two test methods of measuring d- and q-axes inductances of interior permanent-magnet machine', IEEE Transactions on Magnetics, 42, pp. 3712 - 3718

Chao BC; To HP; Grantham C; Rahman MF, 2006, 'Experimental study on using a high-temperature superconducting inductor for power loss reduction in an active power filter', Journal of Physics: Conference Series 264, 43, pp. 913 - 916

Dutta RD; Rahman MF, 2005, 'Interior Permanent Magnet Generator: Generator of New Millennium', International Energy Journal, 6, pp. 51 - 57

Karanayil BV; Rahman MF; Grantham C, 2005, 'Stator and rotor resistance observers for induction motor drive using fuzzy logic and artificial neural networks', IEEE Transactions on Energy Conversion, 20, pp. 771 - 780, http://dx.doi.org/10.1109/TEC.2005.853761

Tang L; Zhong L; Rahman MF; Hu Y, 2004, 'A Novel Direct Torque Controlled Interior Permanent Magnet Synchronous Machine Drive with Low Ripple in Flux and Torque and Fixed Switching Frequency', IEEE Transactions on Power Electronics, 19, pp. 346 - 354

Karanayil BV; Rahman MF; Grantham C, 2004, 'An implementation of a programmable cascaded low-pass filter for arotor flux synthesizer for an induction motor drive', IEEE Transactions on Power Electronics, 19, pp. 257 - 263

Rahman MF; Tang L, 2004, 'An Improved Flux Linkage Estimator for a Direct Torque Controlled PM Syn Motor Drive', Australian Journal of Electrical and Electronics Engineering, 1, pp. 199 - 205

Rahman MF; Haque ME; Tang L; Zhong L, 2004, 'Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive & their remedies', IEEE Transactions on Industrial Electronics, 51, pp. 799 - 809

Haque ME; Zhong L; Rahman MF, 2003, 'A Sensorless Initial Rotor Position Estimation Scheme for a Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive', IEEE Transactions on Power Electronics, 18, pp. 1376 - 1383, http://dx.doi.org/10.1109/TPEL.2003.818869

Hu YW; Tian C; You ZQ; Tang LX; Rahman MF, 2003, 'Direct torque control system and sensorless technique of permanent magnet synchronous motor', Chinese Journal of Aeronautics, 16, pp. 97 - 102, http://dx.doi.org/10.1016/S1000-9361(11)60211-2

Rahman MF; Haque E; Zhong L; Rahman MA, 2003, 'A Direct Torque-Controlled Interior PM Synchronous Motor Drive Without a Speed Sensor', IEEE Transactions on Energy Conversion, 18, pp. 17 - 22, http://dx.doi.org/10.1109/TEC.2002.805200

Back to profile page