By Professor Faz Rahman

Journal articles

Rahman MF; Tang L; Hu Y; Zhong L, 2003, 'A Novel Direct Torque Control for Interior Permanent Magnet Syn. Machine Drive with Low Ripple in Torque and Flux - A speed sensorless approach.', IEEE Transactions on Industry Applications, pp. 1748 - 1756

Rahman MF; Zhong L; Haque E, 2003, 'A Sensorless Initial Rotor Positon Estimation Scheme for a Direct Torque Controlled IPMSM Drive', IEEE Transactions on Power Electronics, 18, pp. 1376 - 1383

Grantham C; Rahman MF; Seyoum D, 2003, 'Improved flux estimation in induction machines for control application', Journal of Electrical and Electronics Engineering, Australia, 22, pp. 243 - 248

Rahman MF; Grantham C; Seyoum D, 2003, 'The Dynamic Characteristics of an Isolated Self-Excited Induction Generator Driven by a Wind Turbine', IEEE Transactions on Industry Applications, 39, pp. 936 - 944

Rahman MF; Haque E; Zhong LL, 2002, 'Improved trajectory control for an interior permanent magnet synchronous motor drive with extended operating limit', Journal of Electrical and Electronics Engineering, Australia, 22(1), pp. 49 - 57

Haque E; Zhong LL; Rahman MF, 2001, 'Initial Rotor Position Estimation of Interior Permanent Magnet Synchronous Motor without a Mechanical Sensor', Journal of Electrical and Electronics Engineering, Australia, 21, pp. 33 - 40

Grantham C; Rahman MF; Seyoum D, 2000, 'A regulated self-excited induction generator for use in a remote area power supply', International Journal of Renewable Energy Engineering, pp. 135 - 140

Rahman MF; Zhong L; Haque E, 2000, 'Selection of voltage switching tables for DTC controlled interior permanent magnet motor', Journal of Electrical and Electronics Engineering, Australia, 20

Çadirci I; Ermiş M; Nalçaci E; Ertan B; Rahman M, 1999, 'A solid state direct on line starter for medium voltage induction motors with minimized current and torque pulsations', IEEE Transactions on Energy Conversion, 14, pp. 402 - 412, http://dx.doi.org/10.1109/60.790889

Zhong L; Rahman MF; Hu W; Lim KW; Rahman AF, 1999, 'A Direct Torque Controller For Permanent Magnet Synchronous Motor Drives', IEEE Transactions on Energy Conversion, 14, pp. 637 - 642

Grantham C; Tabatabaei-Yazdi H; Rahman MF, 1999, 'A novel method for rapid efficiency measurement of three phase induction motors', IEEE Transactions on Energy Conversion, 14, pp. 1236 - 1240, http://dx.doi.org/10.1109/60.815052

Song T; Rahman MF; Lim KW; Rahman AF, 1999, 'A Singular Perturbation Approach to Sensorless Control of A Permanent Magnet Synchronous Motor Drive', IEEE Transactions on Energy Conversion, 14, pp. 1359 - 1365

Rahman MF; Zhong L; Lim KW, 1998, 'A direct torque controlled interior permanent magnet synchronous motor drive incorporating field weakening.', IEEE Transactions on Industry Applications, pp. 1246 - 1253

Rahman MF; Zhong L; Lim KW, 1998, 'Modelling and experimental studies of an instantaneous torque and field weakening control scheme for and interior permanent magnet synchronous motor drive', Mathematics and Computers in Simulation, pp. 289 - 300

Low KS; Lim KW; Rahman MF, 1997, 'A microprocessor based fully digital AC servo drive', Microprocessors and Microsystems, 20, pp. 429 - 436, http://dx.doi.org/10.1016/S0141-9331(97)01118-6

Zhong L; Rahman MF; Hu W; Lim KL, 1997, 'Analysis of Direct Torque Control in Permanent Magnet Synchronous Motor Drives', IEEE Transactions on Power Electronics, 12, pp. 528 - 536

Lim KL; Rahman MF; Yu JB, 1996, 'Comparing controllers for a flexible link', Journal of the Institution of Engineers, pp. 19 - 26

Rahman AF; Cheung NC; Lim KL, 1996, 'Converting a switching solenoid to a proportional actuator', Transactions of IEE, Japan, 116-D, pp. 531 - 537

Low TS; Lim KW; Rahman MF; Binns KJ, 1992, 'Comparison of two control strategies in development of high-torque electronically commutated drive', IEE Proceedings B: Electric Power Applications, 139, pp. 26 - 36, http://dx.doi.org/10.1049/ip-b.1992.0004

Lim KW; Low TS; Rahman MF; Wee LB, 1991, 'A Discrete Time Variable Structure Controller for a Brushless DC Motor Drive', IEEE Transactions on Industrial Electronics, 38, pp. 102 - 107, http://dx.doi.org/10.1109/41.88902

Rahman MF; Poo AN, 1988, 'An Application Oriented Test Procedure For Designing Microstepping Step Motor Controllers', IEEE Transactions on Industrial Electronics, 35, pp. 542 - 546, http://dx.doi.org/10.1109/41.9177

Rahman MF; Poo AN; Chang CS, 1985, 'Approaches to Design of Ministepping Step Motor Controllers and Their Accuracy Considerations', IEEE Transactions on Industrial Electronics, IE-32, pp. 229 - 233, http://dx.doi.org/10.1109/TIE.1985.350163

Rahman MF; Bell R, 1984, 'Loading Characteristic and Optimum Switching Conditions of Multistack Variable Reluctance Type Stepping Motors', IEEE Transactions on Industrial Electronics, IE-31, pp. 11 - 17, http://dx.doi.org/10.1109/TIE.1984.350013

Rahman MF; Bell R, 1983, 'ROLE OF MULTIPHASE EXCITATIONS IN IMPROVING STEPPER MOTOR DAMPING.', Journal of Electrical and Electronics Engineering, Australia, 3, pp. 310 - 315

Back to profile page