By Professor Jang-Kyo Kim

Journal articles

Jiang W; Tsang FFY; Tjong SC; Li RKY; Kim JK; Mai YW, 2001, 'Loading rate dependence of mode II fracture behavior in interleaved carbon fibre/epoxy composite laminates', Applied Composite Materials, 8, pp. 361 - 369, http://dx.doi.org/10.1023/A:1012658114593

Kim JK; Huang XJ; Yu TXI; Chan CM; Guo BH, 2001, 'Interlaminar fracture behaviour of re-formed bamboo/aluminium sheet laminates', Journal of Adhesion Science and Technology, 15, pp. 535 - 552, http://dx.doi.org/10.1163/156856101300189916

Gao SL; Kim JK, 2001, 'Cooling rate influences in carbon fibre/PEEK composites. Part II: Interlaminar fracture toughness', Composites - Part A: Applied Science and Manufacturing, 32, pp. 763 - 774, http://dx.doi.org/10.1016/S1359-835X(00)00188-3

Gao SL; Kim JK, 2001, 'Cooling rate influences in carbon fibre/PEEK composites. Part III: Impact damage performance', Composites - Part A: Applied Science and Manufacturing, 32, pp. 775 - 785, http://dx.doi.org/10.1016/S1359-835X(00)00189-5

Kim JK; Sham ML; Sohn MS; Hamada H, 2001, 'Effect of hybrid layers with different silane coupling agents on impact response of glass fabric reinforced vinylester matrix composites', Polymer, 42, pp. 7455 - 7460, http://dx.doi.org/10.1016/S0032-3861(01)00246-4

Kim JK; Sham ML; Wu J, 2001, 'Nanoscale characterisation of interphase in silane treated glass fibre composites', Composites Part A: Applied Science and Manufacturing, 32, pp. 607 - 618, http://dx.doi.org/10.1016/S1359-835X(00)00163-9

Hodzic A; Stachurski ZH; Kim JK, 2001, 'Nano-indentation and nano-scratch of polymer/glass interfaces. II: Model of interphases in water aged composite materials', Polymer, 42, pp. 5701 - 5710, http://dx.doi.org/10.1016/S0032-3861(01)00029-5

Hodzic A; Stachurski ZH; Kim JK, 2001, 'An analysis of microdroplet test: Effects of specimen geometry, matrix type, fibre treatment and water ageing', Polymers and Polymer Composites, 9, pp. 499 - 508, http://dx.doi.org/10.1177/096739110100900802

Hodzic A; Kalyanasundaram S; Kim JK; Lowe AE; Stachurski ZH, 2001, 'Application of nano-indentation, nano-scratch and single fibre tests in investigation of interphases in composite materials', Micron, 32, pp. 765 - 775, http://dx.doi.org/10.1016/S0968-4328(00)00084-6

Kim WS; Kim JK; Hwang P, 2001, 'Characterization of nano-wear mechanisms of hard disk coatings', Journal of Electronic Materials, 30, pp. 503 - 512, http://dx.doi.org/10.1007/s11664-001-0090-3

Kim JK; Au BPL, 2001, 'Effects of metallization characteristics on gold wire bondability of organic printed circuit boards', Journal of Electronic Materials, 30, pp. 1001 - 1011, http://dx.doi.org/10.1007/BF02657725

Sohn MS; Hu XZ; Kim JK, 2001, 'Impact damage resistance of carbon fibre/epoxy composite laminates containing short Kevlar fibres', Polymers and Polymer Composites, 9, pp. 157 - 168, http://dx.doi.org/10.1177/096739110100900302

Jiang W; Tjong SC; Chu PK; Li RKY; Kim JK; Mai YW, 2001, 'Interlaminar fracture properties of carbon fibre/epoxy matrix composites interleaved with polyethylene terephthalate (PET) films', Polymers and Polymer Composites, 9, pp. 141 - 144, http://dx.doi.org/10.1177/096739110100900206

Zhang JY; Zeng QY; Yu TX; Kim JK, 2001, 'Residual properties of reformed bamboo/aluminium laminates after hygrothermal aging', Composites Science and Technology, 61, pp. 1041 - 1048, http://dx.doi.org/10.1016/S0266-3538(00)00232-3

Sohn MS; Hu XZ; Kim JK, 2000, 'Fractography of damaged carbon fiber/epoxy composites after low-velocity impact', Key Engineering Materials, 183

Kim JK; Sham ML; Hamada H; Hirai Y; Fujihara K; Saidpour H; Sezen M; Dong YJ; Yang HS; Bai YL; Mao TX; Bathias C; Hoa SV; Boutella A; Ngo AD; Krawczak P; Bequignat R; Pabiot J; Pinter S; Banhegyi G; Drzal LT; Ho H; Yue CY; Padmanabhan K; Suzuki Y; Tanimoto T; Schulte K; Karger-Kocsis JK; Cantwell WJ; Zulkitli R; Ye L; Lesko JJ; Garcia K, 2000, 'Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round-robin test results', Composite Interfaces, 7, pp. 227 - 242, http://dx.doi.org/10.1163/156855400300185333

Zhang JY; Yu TX; Kim JK; Sui GX, 2000, 'Static indentation and impact behaviour of reformed bamboo/aluminium laminated composites', Composite Structures, 50, pp. 207 - 216, http://dx.doi.org/10.1016/S0263-8223(00)00104-5

Kim JK; Kim DOH; Hwang P, 2000, 'Hardness of bi-layer films on a leadframe substrate', Journal of Materials Science, 35, pp. 4185 - 4192, http://dx.doi.org/10.1023/A:1004827530244

Hodzic A; Stachurski ZH; Kim JK, 2000, 'Nano-indentation of polymer-glass interfaces. Part I. Experimental and mechanical analysis', Polymer, 41, pp. 6895 - 6905, http://dx.doi.org/10.1016/S0032-3861(99)00890-3

Wu J; Yu D; Chan CM; Kim J; Mai YW, 2000, 'Effect of Fiber Pretreatment Condition on the Interfacial Strength and Mechanical Properties of Wood Fiber/PP Composites', Journal of Applied Polymer Science, 76, pp. 1000 - 1010, http://dx.doi.org/10.1002/(SICI)1097-4628(20000516)76:7<1000::AID-APP3>3.0.CO;2-X

Kim JK; Sham ML, 2000, 'Impact and delamination failure of woven-fabric composites', Composites Science and Technology, 60, pp. 745 - 761, http://dx.doi.org/10.1016/S0266-3538(99)00166-9

Kim DH; Kim JK; Hwang P, 2000, 'Anisotropic tribological properties of the coating on a magnetic recording disk', Thin Solid Films, 360, pp. 187 - 194, http://dx.doi.org/10.1016/S0040-6090(99)00884-6

Yi S; Shen L; Kim JK; Yue CY, 2000, 'A failure criterion for debonding between encapsulants and leadframes in plastic ic packages', Journal of Adhesion Science and Technology, 14, pp. 93 - 105, http://dx.doi.org/10.1163/156856100742122

Yi S; Kim JK; Yue CY; Hsieh JH, 2000, 'Adhesion strengths of epoxy molding compounds to gold-plated copper leadframes', Journal of Adhesion, 73, pp. 1 - 17, http://dx.doi.org/10.1080/00218460008029294

Yi S; Kirn JK; Yue CY; Hsieh JH, 2000, 'Bonding strengths at plastic encapsulant-gold-plated copper leadframe interface', Microelectronics Reliability, 40, pp. 1207 - 1214, http://dx.doi.org/10.1016/S0026-2714(00)00048-2

Gao SL; Kim JK, 2000, 'Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion', Composites Part A: Applied Science and Manufacturing, 31, pp. 517 - 530, http://dx.doi.org/10.1016/S1359-835X(00)00009-9

Sohn MS; Hu XZ; Kim JK, 2000, 'Fractography of damaged carbon fiber/epoxy composites after low-velocity impact', Key Engineering Materials, pp. 1177 - 1182

Sohn MS; Hu XZ; Kim JK; Walker L, 2000, 'Impact damage characterization of carbon fibre/epoxy composites with multi-layer reinforcement', Composites Part B: Engineering, 31, pp. 681 - 691, http://dx.doi.org/10.1016/S1359-8368(00)00028-7

Kim JK; Gao SL, 2000, 'Interface adhesion and interlaminar fracture resistance of carbon/PEEK composites influenced by cooling rate', Key Engineering Materials, 183

Kim JK; Gao SL, 2000, 'Interface adhesion and interlaminar fracture resistance of carbon/PEEK composites influenced by cooling rate', Key Engineering Materials, pp. 1063 - 1068

Kim JK; Lebbai M; Liu JH; Kim JH; Yuen MMF, 2000, 'Interface adhesion between copper lead frame and epoxy moulding compound: Effects of surface finish, oxidation and dimples', Proceedings - Electronic Components and Technology Conference, pp. 601 - 608

Sui GX; Yu TX; Kim JK; Zhou BL, 2000, 'Mechanical behavior and failure modes of aluminum/bamboo sandwich plates under quasi-static loading', Journal of Materials Science, 35, pp. 1445 - 1452, http://dx.doi.org/10.1023/A:1004743821478

Sham ML; Kim JK; Sohn MS; Hu S, 2000, 'Static and dynamic tensile responses of glass woven fabric reinforced composites', Key Engineering Materials, pp. 351 - 356

Hodzic A; Kim JK; Stachurski ZH, 2000, 'The nano-scratch technique as a novel method for measurement of an interphase width', Journal of Materials Science Letters, 19, pp. 1665 - 1667, http://dx.doi.org/10.1023/A:1006726429262

Jeon BS; Lee JJ; Kim JK; Huh JS, 1999, 'Low velocity impact and delamination buckling behavior of composite laminates with embedded optical fibers', Smart Materials and Structures, 8, pp. 41 - 48, http://dx.doi.org/10.1088/0964-1726/8/1/004

Djordjevich A; Kim JK; He YZ, 1999, 'Curvature gauges embedded in composites', Materials Science Research International, 5, pp. 210 - 215

Gao SL; Kim JK, 1999, 'Effect of cooling rate on interphase properties of carbon fibre/PEEK composites', Materials Science Research International, 5, pp. 157 - 162

Gao SL; Kim JK, 1999, 'Scanning acoustic microscopy as a tool for quantitative characterisation of damage in CFRPs', Composites Science and Technology, 59, pp. 345 - 354, http://dx.doi.org/10.1016/S0266-3538(98)00086-4

Gao SL; Kim JK, 1999, 'Effect of Cooling Rate on Interphase Properties of Carbon Fibre/Peek Composites', Zairyo/Journal of the Society of Materials Science, Japan, 48, pp. 157 - 162, http://dx.doi.org/10.2472/jsms.48.9Appendix_157

DJORDJEVICH A; KIM J-K; HE Y-Z, 1999, 'CURVATURE GAUGES EMBEDDED IN COMPOSITES', Journal of the Society of Materials Science, Japan, 48, pp. 210 - 215, http://dx.doi.org/10.2472/jsms.48.9appendix_210

Lee DCY; Kim JK, 1998, 'Measurement of residual stresses in encapsulant of a PQFP', Proceedings of the Electronic Packaging Technology Conference, EPTC, pp. 286 - 290

Hirai Y; Hamada H; Kim JK, 1998, 'Impact response of woven glass-fabric composites - I. Effect of fibre surface treatment', Composites Science and Technology, 58, pp. 91 - 104, http://dx.doi.org/10.1016/S0266-3538(97)00111-5

Hirai Y; Hamada H; Kim JK, 1998, 'Impact response of woven glass-fabric composites - II. Effect of temperature', Composites Science and Technology, 58, pp. 119 - 128, http://dx.doi.org/10.1016/S0266-3538(97)00112-7

Kim DH; Kim JK; Sham ML; Hwang P, 1998, 'Indentation Properties of Copper Leadframe with Hard Coatings', Metals and Materials International, 4, pp. 812 - 817, http://dx.doi.org/10.1007/BF03026404

Sham ML; Kim JK; Wu JS, 1998, 'Interlaminar properties of glass woven fabric composites: Mode I and mode II fracture', Key Engineering Materials, pp. 799 - 804

Gao SL; Kim JK, 1998, 'Interphase morphology and fibre pull-out behaviour of carbon fibre-PEEK composites', Key Engineering Materials, pp. 811 - 816

Kim JK, 1998, 'Methods for Improving Impact Damage Resistance of CFRPs', Key Engineering Materials, 141-143, pp. 149 - 168

Dai Y; Kim JK, 1998, 'Numerical study of the single fibre push-out test: Part I. Mechanics of the test', Composite Interfaces, 5, pp. 323 - 343, http://dx.doi.org/10.1163/156855498x00117

Dai Y; Kim JK, 1998, 'Numerical study of the single fibre push-out test: Part II. Influence of materials and test variables', Composite Interfaces, 6, pp. 103 - 120, http://dx.doi.org/10.1163/156855499X00332

Sui GX; Yu TX; Kim JK; Zhou BL, 1998, 'Static mechanical behavior of bamboo/aluminum composites for applications in industrial structures', Key Engineering Materials, pp. 781 - 786

Back to profile page