By Professor Jay Kruzic

Book Chapters

Kruzic JJ; Yuan R; Cannon RM; Ritchie RO, 2013, 'Determining Worst-Case Fatigue Thresholds for Grain-Bridging Ceramics', in Materials Lifetime Science & Engineering, pp. 60 - 68, http://dx.doi.org/10.1002/9781118788035.ch7

Kruzic JJ, 2012, 'Fatigue threshold R-curves for the analysis of short fatigue cracks', in Fatigue Crack Growth: Mechanisms, Behavior and Analysis, pp. 257 - 270

Ritchie RO; Kinney JH; Kruzic JJ; Nalla RK, 2006, 'Cortical bone fracture', in Wiley Encyclopedia of Biomedical Engineering, 6-Volume Set, Wiley-Interscience

Journal articles

Paul MJ; Li H; Brodie EG; Kruzic JJ; Hutchinson C; Gludovatz B, 2025, 'The effect of micro- and mesoscale heterogeneity on the fracture of laser powder bed fusion processed duplex stainless steels', Scripta Materialia, 255, http://dx.doi.org/10.1016/j.scriptamat.2024.116334

Li B; Ruschel LM; Nomoto K; Gross O; Adam B; Neuber N; Frey M; Ringer SP; Gludovatz B; Busch R; Kruzic JJ, 2025, 'Fracture behavior of NiNb and NiNbP bulk metallic glasses', Journal of Alloys and Compounds, 1010, http://dx.doi.org/10.1016/j.jallcom.2024.177369

Wu Z; Wu S; Kruzic JJ; Hu Y; Yu H; Zhang X; Li X; Wang Q; Kang G; Withers PJ, 2025, 'Critical damage events of 3D printed AlSi10Mg alloy via in situ synchrotron X-ray tomography', Acta Materialia, 282, http://dx.doi.org/10.1016/j.actamat.2024.120464

Moschetti M; Hohenwarter A; Alfreider M; Couzinié JP; Wei T; Davis J; Xu A; Bhattacharyya D; Kruzic JJ; Gludovatz B, 2024, 'Fracture Toughness Investigations of an Ion-Irradiated Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy', Advanced Engineering Materials, 26, http://dx.doi.org/10.1002/adem.202400541

Ajam A; Huang Y; Islam MS; Kilian KA; Kruzic JJ, 2024, 'Mechanical and biological behavior of double network hydrogels reinforced with alginate versus gellan gum', Journal of the Mechanical Behavior of Biomedical Materials, 157, http://dx.doi.org/10.1016/j.jmbbm.2024.106642

Paul MJ; Kruzic JJ; Ramamurty U; Gludovatz B, 2024, 'The importance of fracture toughness evaluation for additively manufactured metals', Acta Materialia, 276, http://dx.doi.org/10.1016/j.actamat.2024.120061

Moschetti M; Perrière L; Couzinié JP; Kruzic JJ; Gludovatz B, 2024, 'A novel strategy for the design of compositionally complex alloys for advanced nuclear applications', Applied Materials Today, 38, http://dx.doi.org/10.1016/j.apmt.2024.102164

Yang Y; Jia Z; Wang Q; Liu Y; Sun L; Sun B; Kuang J; Dai S; He J; Liu S; Duan L; Tang H; Zhang LC; Kruzic JJ; Lu J; Shen B, 2024, 'Vacancy induced microstrain in high-entropy alloy film for sustainable hydrogen production under universal pH conditions', Energy and Environmental Science, 17, pp. 5854 - 5865, http://dx.doi.org/10.1039/d4ee01139b

Shin M; Martens PJ; Siegmund T; Kruzic JJ; Gludovatz B, 2024, 'A numerical study of dehydration induced fracture toughness degradation in human cortical bone', Journal of the Mechanical Behavior of Biomedical Materials, 153, http://dx.doi.org/10.1016/j.jmbbm.2024.106468

Liu Q; Chen W; Yakubov V; Kruzic JJ; Wang CH; Li X, 2024, 'Interpretable machine learning approach for exploring process-structure-property relationships in metal additive manufacturing', Additive Manufacturing, 85, http://dx.doi.org/10.1016/j.addma.2024.104187

Shin M; Kim DK; Jain M; Martens PJ; Turner RT; Iwaniec UT; Kruzic JJ; Gludovatz B, 2024, 'Impact of heavy alcohol consumption on cortical bone mechanical properties in male rhesus macaques', Bone, 181, http://dx.doi.org/10.1016/j.bone.2024.117041

Li C; Jain M; Liu Q; Cao Z; Ferry M; Kruzic JJ; Gludovatz B; Li X, 2024, 'Multi-scale microstructure manipulation of an additively manufactured CoCrNi medium entropy alloy for superior mechanical properties and tunable mechanical anisotropy', Additive Manufacturing, 84, http://dx.doi.org/10.1016/j.addma.2024.104104

Li B; Yakubov V; Nomoto K; Ringer SP; Gludovatz B; Li X; Kruzic JJ, 2024, 'Superior mechanical properties of a Zr-based bulk metallic glass via laser powder bed fusion process control', Acta Materialia, 266, pp. 119685, http://dx.doi.org/10.1016/j.actamat.2024.119685

Moschetti M; Xu A; Hohenwarter A; Wei T; Davis J; Short K; Thorogood GJ; Kong C; Couzinié JP; Bhattacharyya D; Kruzic JJ; Gludovatz B, 2024, 'The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy', Advanced Engineering Materials, 26, http://dx.doi.org/10.1002/adem.202300863

Yang Y; Jia Z; Zhang X; Liu Y; Wang Q; Li Y; Shao L; Di S; Kuang J; Sun L; Zhang LC; Kruzic JJ; Lu Y; Lu J; Shen B, 2024, 'Chemical short-range order in multi-principal element alloy with ordering effects on water electrolysis performance', Materials Today, 72, pp. 97 - 108, http://dx.doi.org/10.1016/j.mattod.2023.12.006

Shin M; Pelletier MH; Lovric V; Walsh WR; Martens PJ; Kruzic JJ; Gludovatz B, 2024, 'Effect of gamma irradiation and supercritical carbon dioxide sterilization with Novakill™ or ethanol on the fracture toughness of cortical bone', Journal of Biomedical Materials Research - Part B Applied Biomaterials, 112, http://dx.doi.org/10.1002/jbm.b.35356

Callan K; Nicholas MK; Ablott TA; Kruzic JJ; Zhang Y, 2024, 'Probing higher valences of uranium in nuclear materials using diffuse reflectance spectroscopy', Journal of the Australian Ceramic Society, http://dx.doi.org/10.1007/s41779-024-01090-y

Kim DG; Kruzic J; Kim DK, 2024, 'Improved Mechanical and Electrochemical Properties of Seed-Assisted Reaction-Sintered Li1.3Al0.3Ti1.7(PO4)3 Solid Electrolytes', Ceramics International, http://dx.doi.org/10.1016/j.ceramint.2024.11.221

Cao Z; Liu Q; Liu Q; Yu X; Kruzic JJ; Li X, 2023, 'A machine learning method to quantitatively predict alpha phase morphology in additively manufactured Ti-6Al-4V', npj Computational Materials, 9, pp. 195, http://dx.doi.org/10.1038/s41524-023-01152-y

Avila Molina J; Muránsky O; Bortolan Neto L; Kruzic JJ; Wright RN, 2023, 'Development and performance of data-driven models for the prediction of the high-temperature fatigue life of alloy 617', International Journal of Pressure Vessels and Piping, 206, http://dx.doi.org/10.1016/j.ijpvp.2023.105022

Islam MS; Molley TG; Hung TT; Sathish CI; Putra VDL; Jalandhra GK; Ireland J; Li Y; Yi J; Kruzic JJ; Kilian KA, 2023, 'Magnetic Nanofibrous Hydrogels for Dynamic Control of Stem Cell Differentiation', ACS Applied Materials and Interfaces, 15, pp. 50663 - 50678, http://dx.doi.org/10.1021/acsami.3c07021

Jain M; Sharma A; Pajor K; Wieczerzak K; della Ventura NM; Maeder X; Kruzic JJ; Gludovatz B; Michler J, 2023, 'Mechanical properties and thermal stability of thin film metallic glass compared to bulk metallic glass from ambient to elevated temperatures', Journal of Alloys and Compounds, 960, http://dx.doi.org/10.1016/j.jallcom.2023.170728

Zhang X; Yang Y; Liu Y; Jia Z; Wang Q; Sun L; Zhang LC; Kruzic JJ; Lu J; Shen B, 2023, 'Defect Engineering of a High-Entropy Metallic Glass Surface for High-Performance Overall Water Splitting at Ampere-Level Current Densities', Advanced Materials, 35, http://dx.doi.org/10.1002/adma.202303439

Yakubov V; He P; Webster RF; Leo Dela Cruz M; Yang Q; Huang S; Kruzic JJ; Li X, 2023, 'Additive manufacturing of crack-free Al-alloy with coarsening-resistant τ1-CeAlSi strengthening phase', Materials Science and Engineering: A, 884, pp. 145551, http://dx.doi.org/10.1016/j.msea.2023.145551

Moe YA; Hasib MT; Paul MJ; Amraei M; Ahola A; Kruzic J; Heidarpour A; Zhao XL, 2023, 'Experimental study on the fatigue crack growth rates of welded ultra-high strength steel plates', Advances in Structural Engineering, 26, pp. 2307 - 2324, http://dx.doi.org/10.1177/13694332231180372

Ruschel LM; Gross O; Bochtler B; Li B; Adam B; Neuber N; Frey M; Jakovlev S; Yang F; Jiang HR; Gludovatz B; Kruzic JJ; Busch R, 2023, 'Ni-Nb-P-based bulk glass-forming alloys: Superior material properties combined in one alloy family', Acta Materialia, 253, pp. 118968, http://dx.doi.org/10.1016/j.actamat.2023.118968

Tanaka CB; Teng H; Li B; Gludovatz B; Xiong DB; Kruzic JJ; Baptiston Tanaka C, 2023, 'Fracture toughness of graphene/aluminum nanolaminated composites', Materials Letters, 337, pp. 133982, http://dx.doi.org/10.1016/j.matlet.2023.133982

Kruzic JJ; Hoffman M; Arsecularatne JA, 2023, 'Fatigue and wear of human tooth enamel: A review', Journal of the Mechanical Behavior of Biomedical Materials, 138, pp. 105574, http://dx.doi.org/10.1016/j.jmbbm.2022.105574

Lopes DP; Freitas SRM; Tanaka CB; Delechiave G; Kikuchi LNT; Braga RR; Kruzic JJ; Moreira MS; Boaro LCC; Catalani LH; Gonçalves F, 2023, 'Synthesis of Submicrometric Chitosan Particles Loaded with Calcium Phosphate for Biomedical Applications', AAPS PharmSciTech, 24, http://dx.doi.org/10.1208/s12249-023-02517-8

Liu H; Nomoto K; Ceguerra AV; Kruzic JJ; Cairney J; Ringer SP, 2023, 'EDP2PDF: a computer program for extracting a pair distribution function from an electron diffraction pattern for the structural analysis of materials', Journal of Applied Crystallography, 56, pp. 889 - 902, http://dx.doi.org/10.1107/S1600576723004053

Yakubov V; He P; Kruzic JJ; Li X, 2023, 'Precipitate formation in cerium-modified additively manufactured AlSi10Mg alloy', Australian Journal of Mechanical Engineering, 21, pp. 1300 - 1310, http://dx.doi.org/10.1080/14484846.2021.1997133

Paul MJ; Klein T; Simson C; Niedermayer J; Kruzic JJ; Gludovatz B, 2022, 'Strength and fracture resistance of in-situ alloyed compositionally-graded Al-Si processed by dual-wire arc directed energy deposition', Additive Manufacturing, 60, http://dx.doi.org/10.1016/j.addma.2022.103291

Li B; Nomoto K; Xie S; Ringer SP; Gludovatz B; Kruzic JJ, 2022, 'Controlling the relaxation versus rejuvenation behavior in Zr-based bulk metallic glasses induced by elastostatic compression', Materials Science and Engineering: A, 855, pp. 143906, http://dx.doi.org/10.1016/j.msea.2022.143906

Ostergaard HE; Pribe JD; Tarik Hasib M; Paradowska AM; Siegmund T; Kruzic JJ; Hasib MT, 2022, 'Near-threshold fatigue crack growth in laser powder bed fusion produced alloy 718', International Journal of Fatigue, 163, pp. 107041, http://dx.doi.org/10.1016/j.ijfatigue.2022.107041

Choi J; Bortolan Neto L; Wright RN; Kruzic JJ; Muránsky O; Muransky O, 2022, 'On the prediction of creep behaviour of alloy 617 using Kachanov-Rabotnov model coupled with multi-objective genetic algorithm optimisation', International Journal of Pressure Vessels and Piping, 199, pp. 104721, http://dx.doi.org/10.1016/j.ijpvp.2022.104721

Pribe JD; Ostergaard HE; Siegmund T; Kruzic JJ, 2022, 'Transient creep-fatigue crack growth in creep-brittle materials: Application to Alloy 718', Fatigue and Fracture of Engineering Materials and Structures, 45, pp. 2873 - 2889, http://dx.doi.org/10.1111/ffe.13788

Moschetti M; Burr P; Obbard E; Kruzic JJ; Hosemann P; Gludovatz B, 2022, 'Design considerations for high entropy alloys in advanced nuclear applications', Journal of Nuclear Materials, 567, pp. 153814, http://dx.doi.org/10.1016/j.jnucmat.2022.153814

Bilal H; Nomoto K; Gludovatz B; Kruzic JJ; Ceguerra AV; Ringer SP, 2022, 'Atom Probe Analysis of a Zr-based Bulk Metallic Glass', Microscopy and Microanalysis, 28, pp. 1348 - 1358, http://dx.doi.org/10.1017/S1431927621012824

Jia Z; Yang Y; Wang Q; Kong C; Yao Y; Wang Q; Sun L; Shen B; Kruzic JJ, 2022, 'An Ultrafast and Stable High-Entropy Metallic Glass Electrode for Alkaline Hydrogen Evolution Reaction', ACS Materials Letters, 4, pp. 1389 - 1396, http://dx.doi.org/10.1021/acsmaterialslett.2c00371

Yakubov V; Kruzic JJ; Li X, 2022, 'Heat-Resistant Intermetallic Compounds and Ceramic Dispersion Alloys for Additive Manufacturing: A Review', Advanced Engineering Materials, 24, http://dx.doi.org/10.1002/adem.202200159

Paul MJ; Muniandy Y; Kruzic JJ; Ramamurty U; Gludovatz B, 2022, 'Effect of heat treatment on the strength and fracture resistance of a laser powder bed fusion-processed 18Ni-300 maraging steel', Materials Science and Engineering: A, 844, http://dx.doi.org/10.1016/j.msea.2022.143167

Best JP; Nomoto K; Yang F; Li B; Stolpe M; Zeng L; Evenson Z; Hugenschmidt C; Li X; Ringer SP; Kruzic JJ, 2022, 'Advanced structural analysis of a laser additive manufactured Zr-based bulk metallic glass along the build height', Journal of Materials Science, 57, pp. 9678 - 9692, http://dx.doi.org/10.1007/s10853-022-06991-6

Li C; Ferry M; Kruzic JJ; Li X, 2022, 'Review: Multi-principal element alloys by additive manufacturing', Journal of Materials Science, 57, pp. 9903 - 9935, http://dx.doi.org/10.1007/s10853-022-06961-y

Hasib MT; Liu Q; Ostergaard HE; Li X; Kruzic JJ, 2022, 'Fracture toughness anisotropy of commercially pure titanium produced by laser powder bed fusion additive manufacturing', International Journal of Fracture, 235, pp. 99 - 115, http://dx.doi.org/10.1007/s10704-021-00601-3

Shin M; Zhang M; vom Scheidt A; Pelletier MH; Walsh WR; Martens PJ; Kruzic JJ; Busse B; Gludovatz B, 2022, 'Impact of test environment on the fracture resistance of cortical bone', Journal of the Mechanical Behavior of Biomedical Materials, 129, pp. 105155, http://dx.doi.org/10.1016/j.jmbbm.2022.105155

Nomoto K; Li B; Gammer C; Ceguerra AV; Bilal H; Hohenwarter A; Eckert J; Gludovatz B; Ringer SP; Kruzic JJ, 2022, 'Deformation-induced medium-range order changes in bulk metallic glasses', Physical Review Materials, 6, pp. 043603, http://dx.doi.org/10.1103/PhysRevMaterials.6.043603

Tanaka CB; Mroz M; Naleway SE; Kruzic JJ; Baptiston Tanaka C, 2022, 'Anisotropic strength and fracture resistance of epoxy-ceramic composite materials produced by ultrasound freeze-casting', Ceramics International, 48, pp. 4904 - 4910, http://dx.doi.org/10.1016/j.ceramint.2021.11.027

Back to profile page