By Professor Michael Ferry

Journal articles

Burgess T; Ferry M, 2009, 'Nanoindentation of metallic glasses', Materials Today, 12, pp. 24 - 32

Quadir MZ; Ferry M; Al-Buhamad OH; Munroe PR, 2009, 'Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding', ACTA Materialia, 57, pp. 29 - 40

Xu W; Ferry M; Humphreys FJ, 2009, 'Spatial morphology of interfacial voids and other features generated at coarse silica particles in nickel during cold rolling and annealing', Scripta Materialia, 60, pp. 862 - 865

Laws KJ; Shamlaye K; Gun B; Ferry M, 2009, 'Synthesis of copper-based bulk metallic glasses in the ternary Cu-Mg-Ca system', Journal of Alloys and Compounds, 486, pp. L27 - L29, http://dx.doi.org/10.1016/j.jallcom.2009.06.205

Quadir MZ; Al-Buhamad OH; Lau K; Quarfoth R; Bassman L; Munroe PR; Ferry M, 2009, 'The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets', International Journal of Materials Research, 12, pp. 1705 - 1714, http://dx.doi.org/10.3139/146.110119

Xu W; Ferry M, 2008, 'Comparison of recrystallization behaviour of cold deformed acicular ferrite produced by conventional processing and direct strip casting', Journal of Materials Processing Technology, 203, pp. 518 - 525, http://dx.doi.org/10.1016/j.jmatprotec.2007.10.069

Laws KJ; Ferry M; Burgess T, 2008, 'Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation', ACTA Materialia, 56, pp. 4829 - 4835

Hoffman MJ; Ferry M; Quadir MZ; Woiz A, 2008, 'Influence of processing parameters on the bond toughness of roll-bonded aluminium strip', Scripta Materialia, 58, pp. 959 - 962

Laws KJ; Gun B; Ferry M, 2008, 'Large-scale production of Ca65Mg15Zn20 bulk metallic glass samples by low-pressure die-casting', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 475, pp. 348 - 354, http://dx.doi.org/10.1016/j.msea.2007.04.059

Laws KJ; Gun B; Ferry M, 2008, 'Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 480, pp. 198 - 204, http://dx.doi.org/10.1016/j.msea.2007.07.034

Chen G; Ferry M, 2007, 'Crystallization and thermally induced surface relief effects in a Mg 65Cu25Y10 bulk metallic glass', Journal of Materials Science, 42, pp. 646 - 651, http://dx.doi.org/10.1007/s10853-006-1140-2

Quadir MZ; Ferry M; Al-Buhamad OH; Bassman L, 2007, 'Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding', ACTA Materialia, 55, pp. 5438 - 5448, http://dx.doi.org/10.1016/j.actamat.2007.06.021

Gun B; Laws KJ; Ferry M, 2007, 'Elevated temperature flow behaviour of a Mg-based bulk metallic glass', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 471, pp. 130 - 134, http://dx.doi.org/10.1016/j.msea.2007.02.121

Ferry M; Burhan N, 2007, 'Microstructural evolution in a fine-grained Al-0.3 wt.% Sc alloy produced by severe plastic deformation', Scripta Materialia, 56, pp. 525 - 528, http://dx.doi.org/10.1016/j.scriptamat.2006.11.015

Mateescu NM; Ferry M; Xu W; Cairney JM, 2007, 'Some factors affecting EBSD pattern quality of Ga+ ion-milled face centred cubic metal surfaces', Materials Chemistry and Physics, 106, pp. 142 - 148, http://dx.doi.org/10.1016/j.matchemphys.2007.05.048

Ferry M; Burhan N, 2007, 'Structural and kinetic aspects of continuous grain coarsening in a fine-grained Al-0.3Sc alloy', ACTA Materialia, 55, pp. 3479 - 3491, http://dx.doi.org/10.1016/j.actamat.2007.01.047

Xu W; Ferry M; Mateescu NM; Cairney JM; Humphreys FJ, 2007, 'Techniques for generating 3-D EBSD microstructures by FIB tomography', Materials Characterization, 58, pp. 961 - 967, http://dx.doi.org/10.1016/j.matchar.2006.10.001

Xu W; Ferry M; Cairney JM; Humphreys FJ, 2007, 'Three-dimensional investigation of particle-stimulated nucleation in a nickel alloy', ACTA Materialia, 55, pp. 5157 - 5167, http://dx.doi.org/10.1016/j.actamat.2007.05.045

Quadir MZ; Mateescu NM; Bassman L; Xu W; Ferry M, 2007, 'Three-dimensional morphology of microbands in a cold-rolled steel', Scripta Materialia, 57, pp. 977 - 980, http://dx.doi.org/10.1016/j.scriptamat.2007.08.012

Gang C; Ferry M, 2006, 'Crystallization of Mg-based bulk metallic glass', Transactions of Nonferrous Metals Society of China, 16, pp. 833 - 837

Laws KJ; Gun B; Ferry M, 2006, 'Effect of die-casting parameters on the production of high quality bulk metallic glass samples', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 425, pp. 114 - 120, http://dx.doi.org/10.1016/j.msea.2006.03.037

Ferry M; Humphreys FJ, 2006, 'Onset of abnormal subgrain growth in cold rolled {1 1 0} [Left Angle Bracket] 0 0 1 [Right Angle Bracket] oriented copper single crystals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 435-436, pp. 447 - 452, http://dx.doi.org/10.1016/j.msea.2006.07.035

Chen G; Ferry M, 2006, 'Some aspects of the fracture behaviour of Mg65Cu25Y10 bulk metallic glass during room-temperature bending', Journal of Materials Science, 41, pp. 4643 - 4648

Gun B; Laws KJ; Ferry M, 2006, 'Static and dynamic crystallization in Mg-Cu-Y bulk metallic glass', Journal of Non - Crystalline Solids, 352, pp. 3887 - 3895, http://dx.doi.org/10.1016/j.jnoncrysol.2006.06.024

Gun B; Laws KJ; Ferry M, 2006, 'Superplastic flow of a Mg-based bulk metallic glass in the supercooled liquid region', Journal of Non - Crystalline Solids, 352, pp. 3896 - 3902, http://dx.doi.org/10.1016/j.jnoncrysol.2006.06.023

Ferry M; Hamilton NE; Humphreys FJ, 2005, 'Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al-Sc alloy', ACTA Materialia, 53, pp. 1097 - 1109

Xu W; Ferry M; Wang Y, 2005, 'Influence of alloying elements on as-cast microstructure and strength of gray iron', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, A390, pp. 326 - 333, http://www.sciencedirect.com/science/article/B6TXD-4DF49DJ-7/2/b7171aa8c64ae370ed6d4c6db87b0b05

Ferry M, 2005, 'Influence of fine particles on grain coarsening within an orientation gradient', ACTA Materialia, 53, pp. 773 - 783, http://www.sciencedirect.com/science/article/B6TW8-4DTKJ52-4/2/2561f66e4e75bb6ad8b8e1702f7bf9c9

Ferry M; Munroe PR, 2004, 'Recrystallization kinetics and final grain size in a cold rolled particulate reinforced Al-based MMC', Composites Part A: Applied Science and Manufacturing, 35, pp. 1017 - 1025, http://dx.doi.org/10.1016/j.compositesa.2004.03.014

Hamilton NE; Ferry M, 2004, 'Grain growth in a nanocrystalline Al-Sc alloy', Materials Transactions, 45, pp. 2264 - 2271

Ferry M; Munroe PR, 2004, 'Kinetics of Recrystallization and final grain size in an Al-based MMC.', Composites Part A - Applied Science and Manufacturing, 35, pp. 1017 - 1025

Ferry M; Xu W, 2004, 'Microstructural and crystallographic features of ausferrite in as-cast gray iron', Materials Characterization, 53, pp. 43 - 49, http://www.sciencedirect.com/science/article/B6TXJ-4D8MGJF-5/2/086c9c422097bc6a9980f0ee48663970

Xu W; Ferry M; Wang Y, 2004, 'The effect of ausferrite formation on the mechanical properties of gray iron', Scripta Materialia, 51, pp. 705 - 709, http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TY2-4CT5WXN-1&_user=10&_coverDate=10%2F01%2F2004&_alid=1667425703&_rdoc=1&_fmt=high&_orig=search&_origin=search&_zone=rslt_list_item&_cdi=5606&_sort=r&_st=13&_docanchor=&view=c&_ct=1&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=dad2e7ce40585578091925d9476aaffd&searchtype=a

Stanford N; Dunne DP; Ferry M, 2003, 'Deformation and annealing of {110} oriented Al single crystals', ACTA Materialia, 51, pp. 665 - 676

Stanford N; Dunne DP; Ferry M, 2003, 'Effect of orientation stability on recrystallization textures of deformed aluminium single crystals', Materials Science and Engineering A, 348, pp. 154 - 162

Ferry M; Munroe PR, 2003, 'Enhanced recovery in a particulate reinforced aluminium composite', Materials Science and Engineering A, A358, pp. 142 - 151

Ferry M; Munroe PR, 2003, 'Recrystallized Grain Size Prediction in a Particulate Reinforced Metal Matrix Composite', Journal of Materials Science, 38, pp. 1925 - 1930

Hunter A; Ferry M, 2002, 'Comparative study of texture development in strip-cast ferritic and austenitic stainless steels', Scripta Materialia, 47, pp. 349 - 355

Manohar PA; Kunishige H; Chandra T; Ferry M, 2002, 'Continuous cooling transformation behaviour of Si-Mn and Al-Mn transformation induced plasticity steels', Materials Science and Technology, 18, pp. 856 - 860

Ferry M; Thompson M; Manohar PA, 2002, 'Decomposition of coarse grained austenite during accelerated cooling of C-Mn steels', ISIJ International, 42, pp. 86 - 93

Hunter A; Ferry M, 2002, 'Evolution of microstructure and texture during casting of AISI 304 stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A, pp. 3747 - 3754

Hunter A; Ferry M, 2002, 'Phase formation during solidification of AISI 304 austenitic stainless steel', Scripta Materialia, 46, pp. 253 - 258

Hunter A; Ferry M, 2002, 'Texture enhancement by inoculation during direct casting of ferritic stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A, pp. 1499 - 1507

Ferry M; Muljono D; Dunne DP, 2001, 'Influence of heating rate on anisothermal recrystallization in low and ultra low carbon steels', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, pp. 90 - 99

Ferry M; Yu D; Chandra T, 2001, 'Influence of hot deformation conditions on the annealing behaviour of a cold rolled ultra low carbon steel', ISIJ International, pp. 876 - 882

Ferry M; Page C, 2001, 'Microstructural control by secondary processing of strip-cast low carbon steel', Materials Science and Technology, pp. 1369 - 1376

Ferry M; Stanford N, 2001, 'Observations using atomic force microscopy of surface relief associated with deformation in cube-oriented single crystals', Scripta Materialia, pp. 941 - 946

Ferry M; Muljono D; Dunne DP, 2001, 'Recrystallization kinetics of low and ultra low carbon steels during high-rate annealing', ISIJ International, pp. 1053 - 1060

Thompson D; Ferry M; Manohar PA, 2001, 'Simulation of hot-band microstructure of C-Mn steels during high speed cooling', ISIJ International, pp. 891 - 899

Manohar PA; Ferry M; Hunter A, 2000, 'Direct strip casting of steel - historical perspective and future direction', Materials Forum, 24, pp. 19 - 36

Back to profile page