By Professor Zhongxiao Peng

Journal articles

Li Z; Jiang Y; Hu C; Peng Z, 2016, 'Recent progress on decoupling diagnosis of hybrid failures in gear transmission systems using vibration sensor signal: A review', Measurement Journal of the International Measurement Confederation, 90, pp. 4 - 19, http://dx.doi.org/10.1016/j.measurement.2016.04.036

Peng Z; Izzat Abdul Rahman M; Zhang Y; Yin L, 2016, 'Wear behavior of pressable lithium disilicate glass ceramic', Journal of Biomedical Materials Research Part B Applied Biomaterials, 104, pp. 968 - 978, http://dx.doi.org/10.1002/jbm.b.33447

Smith WA; Fan Z; Peng Z; Li HUAIZHONG; Randall R, 2016, 'Optimised Spectral Kurtosis for bearing diagnostics under electromagnetic interference', Mechanical Systems and Signal Processing, 75, pp. 371 - 394, http://dx.doi.org/10.1016/j.ymssp.2015.12.034

Li Z; Yan X; Wang X; Peng Z, 2016, 'Detection of gear cracks in a complex gearbox of wind turbines using supervised bounded component analysis of vibration signals collected from multi-channel sensors', Journal of Sound and Vibration, 371, pp. 406 - 433, http://dx.doi.org/10.1016/j.jsv.2016.02.021

Li Z; Yan X; Wang X; Peng Z, 2016, 'Detection of gear cracks in a complex gearbox of wind turbines using supervised bounded component analysis of vibration signals collected from multi-channel sensors', Journal of Sound and Vibration, 371, pp. 406 - 433, http://dx.doi.org/10.1016/j.jsv.2016.02.021

Peng Z, 2016, 'On the bi-dimensional variational decomposition applied to nonstationary vibration signals for rolling bearing crack detection in coal cutters', Measurement Science and Technology, 27, http://dx.doi.org/10.1088/0957-0233/27/6/065103

Li Z; Jiang Y; Wang X; Peng Z, 2016, 'Multi-mode separation and nonlinear feature extraction of hybrid gear failures in coal cutters using adaptive nonstationary vibration analysis', Nonlinear Dynamics, 84, pp. 295 - 310, http://dx.doi.org/10.1007/s11071-015-2505-3

Li Z; Peng Z, 2016, 'Nonlinear dynamic response of a multi-degree of freedom gear system dynamic model coupled with tooth surface characters: a case study on coal cutters', Nonlinear Dynamics, 84, pp. 271 - 286, http://dx.doi.org/10.1007/s11071-015-2475-5

Peng Z, 2016, 'The nonlinear dynamics response of cracked gear system in a coal cutter taking environmental multi-frequency excitation forces into consideration', Nonlinear Dynamics, 84, pp. 203 - 222, http://dx.doi.org/10.1007/s11071-015-2409-2

Hu C; Smith WA; Randall RB; Peng Z, 2016, 'Development of a gear vibration indicator and its application in gear wear monitoring', Mechanical Systems and Signal Processing, http://dx.doi.org/10.1016/j.ymssp.2016.01.018

Shen T; Wang D; Yun J; Liu Q; Liu X; Peng Z, 2016, 'Mechanical stability and rheology of lithium-calcium-based grease containing ZDDP', Rsc Advances, 6, pp. 11637 - 11647, http://dx.doi.org/10.1039/c5ra20288d

Shen T; Wang D; Yun J; Liu Q; Liu X; Peng Z, 2016, 'Tribological properties and tribochemical analysis of nano-cerium oxide and sulfurized isobutene in titanium complex grease', Tribology International, 93, pp. 332 - 346, http://dx.doi.org/10.1016/j.triboint.2015.09.028

Li Z; Jiang Y; Wang X; Peng Z, 2015, 'Multi-mode separation and nonlinear feature extraction of hybrid gear failures in coal cutters using adaptive nonstationary vibration analysis', Nonlinear Dynamics, pp. 1 - 16, http://dx.doi.org/10.1007/s11071-015-2505-3

Peng Y; Wu T; Wang S; Peng Z, 2015, 'Oxidation wear monitoring based on the color extraction of on-line wear debris', Wear, 332-333, pp. 1151 - 1157, http://dx.doi.org/10.1016/j.wear.2014.12.047

Baena JC; Wu J; Peng Z, 2015, 'Wear performance of UHMWPE and reinforced UHMWPE composites in arthroplasty applications: A review', Lubricants, 3, pp. 413 - 436, http://dx.doi.org/10.3390/lubricants3020413

Wu J; Peng Z, 2015, 'The investigation of nanotribology of UHMWPE in fluid using atomic force microscopy', Journal of Biomedical Materials Research Part B Applied Biomaterials, 103, pp. 751 - 763, http://dx.doi.org/10.1002/jbm.b.33249

Peng Y; Wu T; Wang S; Kwok N; Peng Z; Wang S, 2015, 'Motion-blurred particle image restoration for on-line wear monitoring', Sensors Switzerland, 15, pp. 8173 - 8191, http://dx.doi.org/10.3390/s150408173

Peng Z; Baena JC; Wang M, 2015, 'Investigations of micron and submicron wear features of diseased human cartilage surfaces', Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, 229, pp. 164 - 174, http://dx.doi.org/10.1177/0954411915572496

Wang M; Peng Z, 2015, 'Investigation of the nano-mechanical properties and surface topographies of wear particles and human knee cartilages', Wear, 324-325, pp. 74 - 79, http://dx.doi.org/10.1016/j.wear.2014.11.033

Dong CL; Yuan CQ; Bai XQ; Yan XP; Peng Z, 2015, 'Tribological properties of aged nitrile butadiene rubber under dry sliding conditions', Wear, 322-323, pp. 226 - 237, http://dx.doi.org/10.1016/j.wear.2014.11.010

Hu C; Peng Z, 2015, 'Frequency band selection based on the kurtosis of the squared envelope spectrum and its application in bearing fault diagnosis', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229, pp. 0954406215595655 - 0954406215595655, http://dx.doi.org/10.1177/0954406215595655

Wang ML; Peng ZX, 2015, 'Wear in human knees', Biosurface and Biotribology, 1, pp. 98 - 112, http://dx.doi.org/10.1016/j.bsbt.2015.06.003

Baena JC; Peng Z, 2014, '3D quantitative characterization of degraded surfaces of human knee cartilages affected by osteoarthritis', Wear, 319, pp. 1 - 11, http://dx.doi.org/10.1016/j.wear.2014.07.004

Wang M; Ketheesan N; Peng Z, 2014, 'Investigations of wear particles and selected cytokines in human osteoarthritic knee joints', Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, 228, pp. 1176 - 1182, http://dx.doi.org/10.1177/0954411914559570

Peng Y; Wu T; Wang S; Peng Z, 2014, 'Oxidation wear monitoring based on the color extraction of on-line wear debris', Wear, http://dx.doi.org/10.1016/j.wear.2014.12.047

Wu T; Wu H; Du Y; Kwok N; Peng Z, 2014, 'Imaged wear debris separation for on-line monitoring using gray level and integrated morphological features', Wear, 316, pp. 19 - 29, http://dx.doi.org/10.1016/j.wear.2014.04.014

Li Z; Zhang Y; Yan X; Peng Z, 2014, 'A novel prediction model for aircraft spare part intermittent demand in aviation transportation logistics using multi-components accumulation and high resolution analysis', Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, http://dx.doi.org/10.1177/0954410014531742

Guo Z; Yuan C; Yan X; Peng Z, 2014, '3D surface characterizations of wear particles generated from lubricated regular concave cylinder liners', Tribology Letters, 55, pp. 131 - 142, http://dx.doi.org/10.1007/s11249-014-0340-1

Dong C; Yuan C; Bai X; Yan X; Peng Z, 2014, 'Study on wear behaviour and wear model of nitrile butadiene rubber under water lubricated conditions', Rsc Advances, 4, pp. 19034 - 19042, http://dx.doi.org/10.1039/c4ra01703j

Wu H; Wu T; Peng Y; Peng Z, 2014, 'Watershed-based morphological separation of wear debris chains for on-line ferrograph analysis', Tribology Letters, 53, pp. 411 - 420, http://dx.doi.org/10.1007/s11249-013-0280-1

Guo Z; Yuan C; Li Z; Peng Z; Yan X, 2013, 'Condition identification of the cylinder liner-piston ring in a marine diesel engine using bispectrum analysis and artificial neural networks', Insight Non Destructive Testing and Condition Monitoring, 55, pp. 621 - 626, http://dx.doi.org/10.1784/insi.2012.55.11.621

Yin L; Lymer R; Billiau N; Peng Z; Stoll R, 2013, 'Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic', Journal of Materials Science, 48, pp. 7902 - 7912, http://dx.doi.org/10.1007/s10853-013-7599-8

Li Z; Yan X; Qin L; Yuan C; Peng Z, 2013, 'Model reference robust control for marine propulsion systems with model uncertainty caused by hull deformation', Journal of Marine Science and Technology Taiwan, 21, pp. 400 - 409, http://dx.doi.org/10.6119/JMST-012-0518-5

Wang M; Peng Z; Vasilev K; Ketheesan N, 2013, 'Investigation of wear particles generated in human knee joints using atomic force microscopy', Tribology Letters, 51, pp. 161 - 170, http://dx.doi.org/10.1007/s11249-013-0160-8

Yan X; Li Z; Zhang Y; Yuan C; Peng Z, 2013, 'Study on key techniques of wear monitoring and fault diagnosis for marine diesel engines: a review', Zhongguo Jixie Gongcheng China Mechanical Engineering, 24, pp. 1413 - 1419, http://dx.doi.org/10.3969/j.issn.1004-132X.2013.10.027

Wang M; Peng Z; Price J; Ketheesan N, 2013, 'Study of the nano-mechanical properties of human knee cartilage in different wear conditions', Wear, 301, pp. 188 - 191, http://dx.doi.org/10.1016/j.wear.2012.12.015

Peng Z; Wang M, 2013, 'Three dimensional surface characterization of human cartilages at a micron and nanometre scale', Wear, 301, pp. 210 - 217, http://dx.doi.org/10.1016/j.wear.2012.11.056

Guo Z; Yuan C; Li Z; Yan X; Peng Z, 2013, 'Condition identification of cylinder liner-piston ring in marine diesel engine using bispectrum analysis and artificial neural networks', 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013 CM 2013 and Mfpt 2013, 2, pp. 1145 - 1156

Wu T; Wu H; Du Y; Peng Z, 2013, 'Progress and trend of sensor technology for on-line oil monitoring', Science China Technological Sciences, 56, pp. 2914 - 2926, http://dx.doi.org/10.1007/s11431-013-5400-5

Li Z; Yan XP; Tian Z; Yuan CQ; Peng Z; Tian Z, 2013, 'Blind vibration component separation and nonlinear feature extraction applied to the nonstationary vibration signals for the gearbox multi-fault diagnosis', Measurement, 46, pp. 259 - 271, http://dx.doi.org/10.1016/j.measurement.2012.06.013

Wu J; Peng Z; Tipper J, 2013, 'Mechanical properties and three-dimensional topological characterisation of micron, submicron and nanoparticles from artificial joints', Tribology Letters, 52, pp. 449 - 460, http://dx.doi.org/10.1007/s11249-013-0228-5

Wang M; Peng Z; Wang J; Jiang X, 2013, 'Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy', Tribology International, 63, pp. 235 - 242, http://dx.doi.org/10.1016/j.triboint.2012.11.001

Bai XQ; Xie GT; Fan H; Peng ZX; Yuan CQ; Yan XP, 2012, 'Study on biomimetic preparation of shell surface microstructure for ship antifouling', Wear, 306, pp. 285 - 295, http://dx.doi.org/10.1016/j.wear.2012.11.020

Li L; Yu X; Zhang Q; Peng Z, 2012, 'Detrended fluctuation analysis in machine condition diagnosis', Advanced Science Letters, 6, pp. 377 - 380, http://dx.doi.org/10.1166/asl.2012.2201

Tian Y; Wang J; Peng Z; Jiang X, 2012, 'A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study', Wear, 282-283, pp. 59 - 68, http://dx.doi.org/10.1016/j.wear.2012.02.002

Li Z; Yan XP; Guo ZW; Liu P; Yuan CQ; Peng Z, 2012, 'A New Intelligent Fusion Method of Multi-Dimensional Sensors and its Application to Tribo-System Fault Diagnosis of Marine Diesel Engines', Tribology Letters, 47, pp. 1 - 15, http://dx.doi.org/10.1007/s11249-012-9948-1

Kushan M; Peng Z; Peng S, 2012, 'A New System of Failure Warning and Monitoring Control System for Gas Turbine Compressor (GTC)/ Auxiliary Power Unit (APU) of Aircrafts and a Sample Study', Advanced Materials Research, 503-504, pp. 1633 - 1638, http://dx.doi.org/10.4028/www.scientific.net/AMR.503-504.1633

Li Z; Yan X; Guo ZW; Zhang Y; Yuan CQ; Peng Z, 2012, 'Condition monitoring and fault diagnosis for marine diesel engines using information fusion techniques', Elektronika ir Elektrotechnika, 123, pp. 109 - 112, http://dx.doi.org/10.5755/j01.eee.123.7.2387

Li Z; Yan X; Yuan CQ; Peng Z, 2012, 'Intelligent fault diagnosis method for marine diesel engines using instantaneous angular speed', Journal of Mechanical Science and Technology, 26, pp. 2413 - 2423, http://dx.doi.org/10.1007/s12206-012-0621-2

Wang M; Peng Z; Watson J; Watson G; Yin L, 2012, 'Nanoscale study of cartilage surfaces using atomic force microscopy', Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, 226, pp. 899 - 910, http://dx.doi.org/10.1177/0954411912460482

Back to profile page