ORCID as entered in ROS
https://orcid.org/0000-0002-3059-5813
Select Publications
Conference Papers
, 2017, 'Multi-dimensional variational mode decomposition applied to intrinsic vibration mode extraction for bearing crack detection in wind turbines with large speed variation', in 35th Wind Energy Symposium, 2017, http://dx.doi.org/10.2514/6.2017-1169
, 2016, 'Development of Mixing Methods of UHMWPE/Carbon Nanotubes (CNT) Composites for Use in Artificial Joints', in Trans Tech Publications, Taipei-Taiwan, presented at
, 2016, 'Lubricated Wear of Machinable Lithium Disilicate Glass Ceramic', in Key Engineering Materials, Trans Tech Publications, Taiwan, pp. 18 - 22, presented at
, 2016, 'Electromagnetic interference in vibration signals and its effect on bearing diagnostics', in VIRM 11 - Vibrations in Rotating Machinery, Institution of Mechanical Engineers, Manchester, UK, pp. 523 - 533, presented at
, 2015, 'Detecting changes in gear surface roughness using vibration signals', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at
, 2015, 'Fault severity trending in rolling element bearings', in Acoustics 2015 Hunter Valley, Hunter Valley, Australia, presented at
, 2015, 'Dynamic Simulation of IC Engine Bearings for Fault Detection and Wear Prediction', in International Science Index, 17 (11) Part II, Venice, Italy, presented at
, 2014, 'A Simulation Model To Study The Potential Use Of Micro- Structured Surfaces To Improve The Tribological Properties Of UHMWPE', in The 8th Australasian Congress on Applied Mechanics 2014: ACAM 8, Engineers Australia, Melbourne, presented at
, 2014, 'Challenges and strategies in teaching engineering mechanics', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, Engineers Australia, Melbourne, presented at
, 2014, 'The investigation of the wear behaviour of artificial joint at a macro and nano scale', in The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, presented at
, 2014, 'Wear Properties Of Machinable Lithium Disilicate Glass Ceramic', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 / National Committee on Applied Mechanics of Engineers Australia., Melbourne, presented at
, 2014, 'Abrasive wear behaviour of machinable lithium disilicate glass ceramic', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 185 - 190
, 2014, 'Vibration-based spall size tracking in rolling element bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, presented at
, 2014, 'Vibration-based spall size tracking in rolling element
bearings', in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, Milan, Italy, presented at
, 2013, 'Development of an expert system for automatic osteoarthritis diagnosis using numerical characterisations of articular cartilages and wear particles', in 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013, pp. 194 - 198, http://dx.doi.org/10.1109/AIM.2013.6584091
, 2012, 'Investigation of Nano-Mechanical Properties of Cartilages of Sheep Knee Joints', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 315 - 321, presented at
, 2012, 'Teaching First Year Engineering Dynamics at a Small and Large Australian University', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1108 - 1112, presented at
, 2012, 'Teaching first year engineering dynamics at a small and large Australian University', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 1106 - 1112
, 2009, 'Improved acoustical wave propagator technique for acoustic-structure interaction in a duct silencer structure with/without membrane', in 16th International Congress on Sound and Vibration 2009, ICSV 2009, pp. 4324 - 4331
, 2009, 'In-situ monitoring of active crack in steel structure using acoustic emission technique', in 2009 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2009, pp. 229 - 232, http://dx.doi.org/10.1109/ICMTMA.2009.384
, 2008, 'Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach', in Luo JB; Meng YG; Shao TM; Zhao Q (eds.), ADVANCED TRIBOLOGY, TSINGHUA UNIV PRESS, PEOPLES R CHINA, Beijing, pp. 949 - +, presented at
, 2007, 'Wear oriented strategy for gearbox remaining lifetime estimation', in 14th International Congress on Sound and Vibration 2007, ICSV 2007, pp. 3702 - 3709
, 2007, 'Smart condition monitoring by integration of vibration, oil and wear particle analysis.', in ICSV14 2007: 14th International Congress on Sound and Vibration, Cairns, Qld, presented at
, 2005, 'Implementation of network-computing and NN based remote real-time oil well monitoring system', in Proceedings of 2005 International Conference on Neural Networks and Brain Proceedings, ICNNB'05, pp. 1810 - 1814
, 2000, 'Wear particle analysis for machine condition monitoring using computer technologies', in Mathew J; Zhong B (ed.), SYSTEMS INTEGRITY AND MAINTENANCE, PROCEEDINGS, QUEENSLAND UNIVERSITY TECHNOLOGY, PEOPLES R CHINA, NANJING, pp. 321 - 326, presented at
Preprints
, Machine-Learning Assisted Laser Powder Bed Fusion Process Optimization for AlSi10mg: New Microstructure Description Indices and Fracture Mechanisms, http://dx.doi.org/10.2139/ssrn.3681162
https://orcid.org/0000-0002-3059-5813