ORCID as entered in ROS
https://orcid.org/0000-0002-7759-5001
Select Publications
Conference Papers
, 2019, 'Development of multiscale toughening technique to address the micro-cracking problem of composites at cryogenic temperature', in TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, presented at
, 2019, 'Investigating meso-mechanical failure in composite materials using the Semi-conformal Embedded Technique (SET)', Melbourne, Australia, presented at
, 2019, 'Correction: Plotting Load Paths from Finite Element Stress Results for Aerospace Structures', in AIAA Scitech 2019 Forum, American Institute of Aeronautics and Astronautics, presented at
, 2019, 'Disbond growth assessment for bonded joints and patch repairs of primary airframe structures', in ICCM International Conferences on Composite Materials
, 2019, 'Plotting of load paths from finite element stress results for aerospace structures', in AIAA Scitech 2019 Forum, http://dx.doi.org/10.2514/6.2019-0509
, 2018, 'Post-impact Motion Control of a Space Robot with Flexible Manipulator', Singapore, presented at
, 2018, 'Longitudinal Program Analytics - Interventions, quality assurance, credentialing and employability', in UNSW Engineering Education Showcase 2018, UNSW, presented at
, 2018, 'Control of a Space Robot with Flexible Manipulator using Generalized Decoupling Technique', Wuhan, China, presented at
, 2017, 'Nonlinear Model Predictive Control of a Planar Three-link Space Manipulator', Gold Coast, presented at
, 2017, 'A length offset based model for trajectory tracking of two-link planar robot arms', in 9th Australasian Congress on Applied Mechanics, ACAM 2017, UNSW, presented at
, 2017, 'Preliminary observations on the architecture of textile composites using micro-Xray-CT', in Preliminary observations on the architecture of textile composites using micro-Xray-CT, Xian, China, presented at
, 2017, 'Predicting the effect of temperature on matrix cracking in thermoset matrix composites using a strain invariant approach', in Proceedings, International Conference on Composite Materials ICCM 21, Xian, China, presented at
, 2017, 'Sensitivity of Orthotropic Material Parameters used within the Strain Invariant Failure Theory', in ICCM International Conferences on Composite Materials, Xian, China, presented at
, 2017, 'A Modified Arcan Test for Mixed-Mode Loading of Bolted Joints in Composite Structures', in ICCM International Conferences on Composite Materials, Xi'an, China, presented at
, 2017, 'Solar Concentrator Design Optimization Using Variable Cross Section Beams', in Solar Concentrator Design Optimization Using Variable Cross Section Beams, ASME 2017 Summer Heat Transfer Conference, Bellevue, WA, USA, presented at
, 2017, 'Solar concentrator structural optimization: A variable beam cross section design', in ASME 2017 Heat Transfer Summer Conference, HT 2017, Bellevue, Washington, USA, presented at
, 2017, 'A Scaffolded Peer-Assessment Model for Individual Research Activities', in UNSW Engineering Education Showcase, UNSW Engineering Education Showcase, UNSW, Sydney, Australia, presented at
, 2017, 'Damage Development in Fibre Reinforced Polymer Composites', in Proceedings, 11th International Conference on Composite Science and Technology, Sharjah, UAE, presented at
, 2017, 'A comparison of meshing techniques used for modelling composite materials at the meso-mechanical level', in 9th Australasian Congress on Applied Mechanics, ACAM 2017
, 2016, 'Student Engagement in the Digital Age: A Review of Effective Teaching within Limited Physical Contact Hours', in Proceedings of the 27th Australasian Association for Engineering Education (AAEE) Annual Conference, 27th Australasian Association for Engineering Education (AAEE) Annual Conference, Coffs Harbour, presented at
, 2016, 'Effect of Ultrasonic Peening on Fatigue Crack Propagation from a Weld Toe', in Proceedings of the 69th IIW ANNUAL ASSEMBLY AND INTERNATIONAL CONFERENCE, INTERNATIONAL INSTITUTE OF WELDING, Melbourne Convention and Exhibition Centre, Melbourne, Australia, presented at
, 2016, 'On the Structural Design of Imperfection Sensitive Laminated Composite Shell Structures Subjected to Axial Compression', in ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece, presented at
, 2015, 'Investigation of Stochastic Simulation into Helicopter Structural Crash after Autorotation Scenarios', in 7th Asia-Pacific International Symposium on Aerospace Technology, RMIT informit database, Cairns, Queensland, presented at
, 2015, 'Validating Airframe Simulation Model of R22 Helicopter by Using Crashworthiness Standards', in Monaghan M (ed.), Validating Airframe Simulation Model of R22 Helicopter by Using Crashworthiness Standards, SimTecT 2015 - Asia Pacific Simulation Training Conference and Exhibition, Adelaide, South Australia, presented at
, 2015, 'Application of Onset Theory to Onset of Transverse Cracking in Fabric Composites', in Thomsen OT; Berggreen C; Sorensen BF (eds.), ICCM International Conferences on Composite Materials, AALBORG UNIV PRESS, Copenhagen, Denmark, presented at
, 2015, 'Stochastic analysis of imperfection sensitive composite cylinders using realistic imperfection models', in Degenhardt R (ed.), Proceedings of the 3rd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Braunschweig, presented at
, 2015, 'A Methodology of Integrating Convex Hull into Data Mining for Simulation of Helicopter Autorotation', in Proceedings of 16th International Aerospace Congress, RMIT Informit, presented at
, 2015, 'Intermediate failure of bolted joints in composite materials', in Intermediate failure of bolted joints in composite materials, Engineers Australia, Melbourne, Australia, pp. 231 - 236, presented at
, 2014, 'Improved Methods for Modelling Imperfections for Buckling Analysis of Composite Cylindrical Shells', in Proceedings of the 29th Congress of the International Council of the Aeronautical Sciences, St Petersburg, Russia, presented at
, 2014, 'Experimental and numerical investigation of composite energy absorbers using variable load concept', in 40th European Rotorcraft Forum 2014, Southampton, UK, pp. 963 - 974, presented at
, 2014, 'Analysis of Monte-Carlo Simulation on Helicopter Accidents Caused by Engine Failure', in Fisher A (ed.), SimTecT 2014 and SimHealth 2014 Conference Proceedings, Simulation Australia, Adelaide, Australia, pp. 89 - 94, presented at
, 2014, 'Impact tests and simulations of crashworthy composite structures using Variable Load Concent', in Annual Forum Proceedings - AHS International, pp. 1557 - 1568
, 2013, 'Atoms to Assemblies: A Physics-Based Hierarchical Modelling Approach for Polymer Composite Components', Sydney, Australia, presented at
, 2013, 'A NOVEL VARIABLE LOAD ENERGY ABSORBING COMPOSITE COMPONENT FOR IMPROVING HELICOPTER CRASHWORTHINESS', in SAMPE EUROPE TECHNICAL CONFERENCE AND TABLE TOP EXHIBITION. 8TH 2013. (SETEC 13) NOVEL ASPECTS IN COMPOSITE TECHNOLOGIES: FROM FIBRE TO LIGHTWEIGHT STRUCTURES, Wuppertal, Germany, presented at
, 2013, 'Experimental Investigation on Energy Absorbing Pressurised Composite Tubes', in Proceedings International Conference on Composite Materials 2013 (ICCM-19), Montreal, Canada, presented at
, 2013, 'RUBBER PAD FORMING OF GLARE CRUCIFORM USING NUMERICAL AND EXPERIMENTAL ANALYSIS', in Proceedings International Conference on Composite Materials 2013 (ICCM-19), Montreal, Canada, presented at
, 2013, 'INFLUENCE OF IMPERFECTIONS ON AXIAL BUCKLING LOAD OF COMPOSITE CYLINDRICAL SHELLS', in Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, presented at
, 2013, 'New Developments in Onset Theory for Onset of Resin Failure in Fibre Reinforced Composites', Montreal, Canada, presented at
, 2013, 'New Developments for Application of Onset Theory to Unidirectional and Fabric Laminates', in Proceedings of the 17th International Conference on Composite Structures, ICCS17, Porto, Portugal, presented at
, 2013, 'Characterisation of Dilatation using Fractography', in Ferreira A (ed.), Characterisation of Dilatation using Fractography, 17th International Conference on Composite Structures (ICCS17), Porto, Portugal, presented at
, 2013, 'Application of a Damage Mechanics Algorithm Based on Critical Strain Invariants to Progressive Failure of a [0/90]s Specimen', in Ferreira A (ed.), Application of a Damage Mechanics Algorithm Based on Critical Strain Invariants to Progressive Failure of a [0/90]s Specimen, 17th International Conference on Composite Structures (ICCS17), Porto, Portugal, presented at
, 2012, 'A New Multi-Objective Robust Optimisation Methodology', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 10, presented at
, 2012, 'Identifying Load Paths from Finite Element Analysis with Application to Reinforcement of Membrane Structures', in Gu Y; Saha SC (ed.), Proceedings of 4th International Conference on Computational Mechanics, Queensland University of Technology (QUT), Queensland, presented at
, 2012, 'A Feasibility Study for Multimaterial Retrofittable Energy Absorbing Structure for Aged Helicopter Subfloor', in ICAS 2012 CD-ROM PROCEEDINGS, Optimage Ltd. on behalf of the International Council of the Aeronautical Sciences, UK, pp. 1 - 8, presented at
, 2012, 'Application of a Scalar Strain-Based Damage Onset Theory to the Failure of a Complex Composite Specimen', in Grant I (ed.), ICAS 2012 CD-ROM PROCEEDINGS, Optimage Ltd. on behalf of the International Council of the Aeronautical Sciences, UK, presented at
, 2012, 'Directional Enhancement of Composite Structures Energy Absorption Using Magnetorheological Fluids', in ICAS 2012 CD-ROM PROCEEDINGS, Optimage Ltd. on behalf of the International Council of the Aeronautical Sciences, UK, pp. 1 - 9, presented at
, 2012, 'Experimental Development and Analysis of an Active Crushing Element Using Pressurized Composite Tubes', in ICAS 2012 CD-ROM PROCEEDINGS, Optimage Ltd. on behalf of the International Council of the Aeronautical Sciences, UK, pp. 1 - 8, presented at
, 2012, 'Pull-through Failure Prediction for Composite Bolted Joints Using Onset Theory', in Marino Q (ed.), Proceedings of the 15th European Conference on Composite Materials, 15th European Conference on Composite Materials, Venice, pp. 1 - 8, presented at
, 2012, 'A Micromechanical Sub-Modelling Technique for Implementing Onset Theory', in Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Politechnico di Torino, Torino, Italy, presented at
, 2012, 'Bearing Failure Prediction for Composite Pin-Loaded Holes and Bolted Joints Using Onset Theory', in Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Politechnico di Torino, Torino, Italy, presented at
Filter by type
https://orcid.org/0000-0002-7759-5001