ORCID as entered in ROS
https://orcid.org/0000-0002-8232-3537
Select Publications
Conference Papers
, 2014, 'Analysis of MMF and back-EMF waveforms for fractional-slot concentrated-wound permanent magnet machines', in Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014, pp. 1976 - 1982, http://dx.doi.org/10.1109/ICELMACH.2014.6960455
, 2014, 'Overmodulation Techniques for the Three-to-Five Phase Indirect Matrix Converter with Space Vector PWM', in IECON 2014 - 40th Annual Conference of the Industrial Electronics Society, Dallas, Texas USA, presented at
, 2014, 'Performance analysis of a new concentratedwinding interior permanent magnet synchronous machine under Field Oriented Control', in 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014, pp. 2679 - 2685, http://dx.doi.org/10.1109/IPEC.2014.6869969
, 2014, 'Analysis of common mode voltage using carrier-based method for dual-inverter open-end winding', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at
, 2014, 'Application of partial direct-pole-placement and differential evolution algorithm to optimize controller and LCL filter design for grid-tied inverter', in Power Engineering Conference (AUPEC), 2014 Australasian Universities, pp. 1 - 6, presented at
, 2013, 'Space vector PWM for three-to-five phase indirect matrix converters with d2-q2 vector elimination', in IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, pp. 4937 - 4942, presented at
, 2013, 'Distributed and concentrated winding Interior PM Synchronous Machine (IPMSM) for direct drive wind turbine', Vienna, Austria, presented at
, 2013, 'Investigation of flat and V-shaped magnets in interior permanent magnet machine for direct drive wind turbine application', in 2013 IEEE ECCE Asia Downunder - 5th IEEE Annual International Energy Conversion Congress and Exhibition, IEEE ECCE Asia 2013, pp. 208 - 213, http://dx.doi.org/10.1109/ECCE-Asia.2013.6579098
, 2013, 'Space vector PWM for five-to-three phase conventional matrix converter with d
, 2013, 'Design of an interior permanent magnet synchronous machine suitable for direct drive wind turbine', in Renewable Power Generation Conference (RPG 2013), 2nd IET, Beijing, China, presented at
, 2013, 'Design of a 4KW interior permanent magnet machine suitable for low speed application', in 2013 International Conference on Electrical Machines and Systems, ICEMS 2013, pp. 986 - 991, http://dx.doi.org/10.1109/icems.2013.6754377
, 2013, 'Investigating characteristics of a concentrated-winding interior permanent magnet synchronous machine for sensorless direct torque control', in SLED/PRECEDE 2013 - 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics, http://www.scopus.com/inward/record.url?eid=2-s2.0-84893273953&partnerID=40&md5=4c279d2c2a7c3eada26e779642e6e762
, 2013, 'Investigation of sensorless direct torque control using high frequency injection apply to a fractional-slot concentrated winding interior PMSM', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1312 - 1317, http://www.scopus.com/inward/record.url?eid=2-s2.0-84880715088&partnerID=40&md5=a06c4cee724d76b2583d436c0e2702f7
, 2013, 'Performance comparison between concentrated and distributed wound IPM machines used for field weakening applications', in International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2011 and Electromotion 2011 Joint Conference, pp. 616 - 619, http://www.scopus.com/inward/record.url?eid=2-s2.0-84876469803&partnerID=40&md5=4375d536dbc27815151271b5a67b0bac
, 2012, 'Application of particle swarm optimization in the design of large permanent magnet synchronous generators for wind turbines', in 2012 IEEE International Conference on Power and Energy (PECon), IEEE, Kota Kinabalu, Malaysia, pp. 162 - 167, presented at
, 2012, 'Review of PM Generator Designs for Direct-Drive Wind Turbines', in AUPEC 2012, IEEE, USA, pp. 1 - 6, presented at
, 2012, 'Sensorless direct torque control of a fractional-slot concentrated winding interior permanent magnet synchronous machine using extended rotor flux model', in 2012 IEEE Symposium on Sensorless Control for Electrical Drives (SLED), IEEE, Milwaukee, WI, USA, pp. 1 - 6, presented at
, 2012, 'An investigation of the use of a Halbach array in MW level permanent magnet synchronous generators', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 59 - 65, presented at
, 2012, 'Comparative performance analysis of field-oriented control and direct torque control for a fractional-slot concentrated winding interior permanent magnet synchronous machine', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, pp. 879 - 885, presented at
, 2012, 'Flux density analysis of using Halbach array in MW level permanent magnet synchronous generators for wind turbines: A preliminary linear mode', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 274 - 280, presented at
, 2012, 'The preliminary results on Direct Torque Control for an fractional-slot concentrated winding Interior Permanent Magnet Synchronous Machine', in Conference Proceedings - 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012, IEEE Computer Society, Washington, DC, United States, pp. 1020 - 1026, presented at
, 2011, 'RF and mixed-signal performances of a low cost 28nm low-power CMOS technology for wireless system-on-chip applications', in Digest of Technical Papers - Symposium on VLSI Technology, pp. 40 - 41
, 2011, 'Experimental verification of open circuit parameters of an IPM machine with concentrated windings', in 2011 International Conference on Electrical Machines and Systems, ICEMS 2011, IEEE, Piscataway, NJ, United States, pp. 1 - 4, presented at
, 2011, 'Optimal stator-current trajectory control of an IPM synchronous machine for hybrid electric vehicles', IEEE, Jeju, South Korea, pp. 1958 - 1963, presented at
, 2011, 'Analysis of CPSR in motoring and generating modes of an IPM motor', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 1474 - 1479, presented at
, 2011, 'Experimental verification of core and magnet losses in a concentrated wound IPM machine with V-shaped magnets used in field weakening applications', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 977 - 982, presented at
, 2010, 'Comparison of Concentrated and Distributed Windings in an IPM Machine for Field Weakening Applications', in 2010 20th Australasian Universities Power Engineering Conference (AUPEC 2010), IEEE, Piscataway, NJ, USA, pp. 1 - 5, presented at
, 2010, 'Field Weakening Performance of a Concentrated Wound PM Machine with Rotor and Magnet Geometry Variation', in Proceedings of general meeting of Power and Energy Society (PES),, IEEE, Minneapolis, USA, pp. 1 - 4, presented at
, 2010, 'Design of a Highly Efficient 1kW IPM Machine with a Very Wide Constant Power Speed Range', in Proceedings of International Power Electronics Conference -ECCE-Asia (IPEC),, IEEE, Japan, pp. 1956 - 1961, presented at
, 2010, 'A Comparative Study of Rotor Losses in an IPM with Single and Double Layer Concentrated Windings', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, presented at
, 2009, 'Design and Thermal Considerations of an Interior Permanent Magnet Machine with Conctrated Windings', in Electrical Machines and Systems, 2009. ICEMS 2009. International Conference on, IEEE, Tokyo, presented at
, 2009, 'Design and Mechanical Consideration of an IPM Machine with Concentrated Windings', IEEE, Adelaide, presented at
, 2009, 'Design of IPM machine with Concentrated Windings for Vehicular Applications', in EPE 2009 Barcelona, IEEE, Barcelona, Spain, presented at
, 2009, 'Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications', IEEE, Miami, presented at
, 2008, 'Parameter Analysis of an IPM Machine with Fractional-slot Cencentrated Windings, Part I : Open-circuit Analysis', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at
, 2008, 'Parameter Analysis of an IPM Machine with Fractional-Slot Concentrated Windings, Part II: Including Armature Reaction', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at
, 2008, 'Open circuit analysis of concentrated winding in interior permanent magnet machines with fractional slot distribution', in IET Conference Publications, pp. 235 - 239, http://dx.doi.org/10.1049/cp:20080518
, 2008, 'Effect of Rotor Magnet Segmentational of the Constant-Power Speed Range of an IPM Machine for Traction Application', in ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at
, 2008, 'Open-circuit analysis of concentrated winding in interior permanent magnet machines', in UKACC International Conference on Control 1998, York St.Johns University York, UK, presented at
, 2007, 'Application of concentrated windings in interior permanent magnet machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at
, 2007, 'Analysis of cogging torque and its effect on direct torque control (DTC) in a segmented interior permanent magnet machine', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, presented at
, 2007, 'Cogging torque analysis of a segmented interior permanent magnet machine', in International Electric Machines and Drives Conference, Antalya, Turkey, presented at
, 2006, 'Experimental verification of a segmented magnet interior permanent magnet machine (IPM) with wide constant power speed range (CPSR)', in Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at
, 2006, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', in 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, presented at
, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine and Its Control', in 2nd National Power Electronics Conference, Calcutta, India, presented at
, 2005, 'Comparison of Core Loss Prediction Methods for the Interior Permanent Magnet Machine', in Rumzi N; Indris N (ed.), 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, pp. 1396 - 1401, presented at
, 2005, 'Effect of Iron Loss on the Performance of Interior Permanent Magnet Machines', in Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, presented at
, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine with Wide Constant Power Range for Traction Application in Hybrid Vehicles', in IEEE Vehicle Power and Propulsion Conference (VPPC 2005), Chicago Illinois USA, presented at
, 2005, 'Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines', in IEEE International Electric Machines and Drives Conference 2005, San Antonio, Texas, presented at
, 2004, 'Investigation of suitable vector control techniques for low voltage IPM machine in 42V system', in Annual conference of IEEE industrial electronics society (IECON 2004), Busan, South Korea, presented at
https://orcid.org/0000-0002-8232-3537