ORCID as entered in ROS
https://orcid.org/0000-0002-8232-3537
Select Publications
Conference Papers
, 2024, 'Analysis of Machine Inductance Variation on Loss Minimization Control', in 2024 International Conference on Electrical Machines, ICEM 2024, http://dx.doi.org/10.1109/ICEM60801.2024.10700485
, 2023, 'Analysis of Zero Sequence Current in an Open Winding Permanent Magnet Synchronous Machine Under Rotor Magnet Fault Condition', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 5321 - 5328, http://dx.doi.org/10.1109/ECCE53617.2023.10362902
, 2023, 'Improved Deadtime Compensation Method Considering Currrent Ripple', in 2023 IEEE International Conference on Energy Technologies for Future Grids, ETFG 2023, http://dx.doi.org/10.1109/ETFG55873.2023.10408393
, 2023, 'Improvement of Inductance Measurement of IPMSM', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 4302 - 4307, http://dx.doi.org/10.1109/ECCE53617.2023.10362093
, 2023, 'Suppression Analysis of Zero-sequence Current Under Magnet Fault in an Open-winding Permanent Magnet Synchronous Machine', in 2023 IEEE International Conference on Energy Technologies for Future Grids, ETFG 2023, http://dx.doi.org/10.1109/ETFG55873.2023.10408221
, 2022, 'Evaluation of an isolated and modular Bi-directional Power Converter for Charging Battery/Ultra-Capacitors for EV', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058062
, 2022, 'Loss Analysis of a High-Speed IPMSM using Different Trajectory Control', in 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022, http://dx.doi.org/10.1109/ECCE50734.2022.9947821
, 2022, 'Online Deadbeat Predictive Direct Torque and Active Flux Control for IPMSM Drive', in 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia, pp. 2479 - 2483, http://dx.doi.org/10.23919/IPEC-Himeji2022-ECCE53331.2022.9806977
, 2022, 'Performance analysis of MPC-based Zero Sequence Current Controllers in an Open- Winding PMSM', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058305
, 2021, 'Deadbeat Predictive Direct Torque and Active Flux Control with Disturbance Observer', in IECON Proceedings (Industrial Electronics Conference), http://dx.doi.org/10.1109/IECON48115.2021.9589079
, 2021, 'Analytical Calculation of the Mechanical Stress on IPMSM Bridges with Decomposition of the Centrifugal Force', in 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings, pp. 4639 - 4645, http://dx.doi.org/10.1109/ECCE47101.2021.9595665
, 2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in ECCE 2020 - IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805, http://dx.doi.org/10.1109/ECCE44975.2020.9235827
, 2019, 'Study on PCB Based Litz Wire Applications for Air-Core Inductor and Planar Transformer', in 2019 9th International Conference on Power and Energy Systems, ICPES 2019, http://dx.doi.org/10.1109/ICPES47639.2019.9105549
, 2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6092 - 6098, http://dx.doi.org/10.1109/ECCE.2019.8912980
, 2019, 'An improved modulated model predictive torque and flux control for high-speed IPMSM drives', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6601 - 6607, http://dx.doi.org/10.1109/ECCE.2019.8913018
, 2019, 'An Analytical Approach to Direct Torque and Flux Control of Interior Permanent Magnet Synchronous Machine for Deep Field Weakening Without Using Pre-calculated Lookup Tables', in ICPE 2019 - ECCE Asia - 10th International Conference on Power Electronics - ECCE Asia, Busan, Korea, pp. 3196 - 3202, presented at
, 2018, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of the Interior Permanent-Magnet Synchronous Machine', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 255 - 261, http://dx.doi.org/10.1109/ECCE.2018.8557418
, 2018, 'Design Optimization of a Spoke-Type FSCW IPM Machine to Achieve Low Torque Ripple and High Torque Density under a Wide Constant Power Speed Range', in 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 6914 - 6921, http://dx.doi.org/10.1109/ECCE.2018.8558066
, 2018, 'Study on core loss reduction in the transformer of isolated DC/DC converter with series L-C and resonant L-C shunt filter', in Australasian Universities Power Engineering Conference, AUPEC 2018, http://dx.doi.org/10.1109/AUPEC.2018.8757908
, 2018, 'Investigation of the Stress Concentration Factor for Estimating Maximum Mechanical Stress of Interior Permanent-Magnet Machines', in Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018, pp. 798 - 804, http://dx.doi.org/10.1109/ICELMACH.2018.8507225
, 2018, 'Position Sensorless Control of an Interior Permanent Magnet Synchronous Machine (IPMSM) in Deep Flux-weakening Region', in 2018 IEEE 9th International Symposium on Sensorless Control for Electrical Drives, SLED 2018, pp. 114 - 119, http://dx.doi.org/10.1109/SLED.2018.8486136
, 2017, 'Challenges of considering saliency ratio in design optimization of IPM machines', in Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 1828 - 1833, http://dx.doi.org/10.1109/IECON.2017.8216309
, 2017, 'Preliminary study on differences in the performance characteristics of concentrated and distributed winding IPM machines with different rotor topologies', in 2017 IEEE Energy Conversion Congress and Exposition, ECCE 2017, Cincinnati, OH, USA, pp. 3565 - 3570, presented at
, 2017, 'Airgap magnetic field estimation for IPM rotors considering their non-uniform local saturation', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at
, 2017, 'Deep flux weakening control with six-step overmodulation for a segmented interior permanent magnet synchronous motor', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at
, 2017, 'Direct torque and flux control of a fractional-slot concentrated-winding IPMSM in deep flux-weakening region', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at
, 2017, 'Torque ripple minimization of an IPMSG with fractional-slot, concentrated-winding using uncontrolled rectifier-connected boost converter control', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at
, 2017, 'Tradeoffs in high-speed performance characteristics in optimization of saliency ratio and efficiency for designing FSCW IPM machines', in 2017 20th International Conference on Electrical Machines and Systems, ICEMS 2017, Sydney, NSW, Australia, presented at
, 2017, 'Challenges for including characteristic current as a design parameter in optimization of IPM machines', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at
, 2017, 'Verification of a novel voltage control strategy for MTPV control of a fractional-slot concentrated-winding IPMSM', in 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017, Miami, FL, USA, presented at
, 2017, 'Analysis of low-speed IPMMs with distributed and fractional slot concentrated windings designed for wind energy applications', in 2017 IEEE International Magnetics Conference, INTERMAG 2017, Dublin, Ireland, presented at
, 2016, 'Post-fault control strategy for IPMSMs with non-sinusoidal back-EMFs in an open-ended winding configuration', in IECON Proceedings (Industrial Electronics Conference), pp. 2879 - 2884, http://dx.doi.org/10.1109/IECON.2016.7793768
, 2016, 'Power and voltage control of a nonpitchable direct driven fractional slot concentrated wound-IPMSG based wind turbine operating above base speed', in IECON Proceedings (Industrial Electronics Conference), pp. 1961 - 1966, http://dx.doi.org/10.1109/IECON.2016.7793453
, 2016, 'Torque ripple minimization in dual inverter open-end winding PMSM drives with non-sinusoidal back-EMFs by harmonic current suppression', in IECON Proceedings (Industrial Electronics Conference), pp. 2975 - 2980, http://dx.doi.org/10.1109/IECON.2016.7793479
, 2016, 'Optimization of a MW Halbach PMSG for wind turbine applications', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, pp. 1963 - 1969, http://dx.doi.org/10.1109/ICELMACH.2016.7732792
, 2016, 'A modified single-current-regulator control scheme for deep flux-weakening operation of interior permanent magnet synchronous motors', in IECON Proceedings (Industrial Electronics Conference), IEEE, Florence, Italy, pp. 2624 - 2629, presented at
, 2016, 'Effect of eliminating rotor iron on a mega-watt halbach permanent magnet synchronous generator for wind turbine applications', in IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, IEEE, pp. 1 - 6, presented at
, 2016, 'Detailed analytical modelling of fractional-slot concentrated-wound interior permanent magnet machines for prediction of torque ripple', in Energy Conversion Congress and Exposition (ECCE), 2016 IEEE, IEEE, Milwaukee, WI, pp. 1 - 8, presented at
, 2016, 'Control of direct driven fractional slot concentrated wound-IPMSG for variable speed wind energy system', in Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016, IEEE, Lausanne, SWITZERLAND, pp. 1001 - 1007, presented at
, 2016, 'Analytical modeling of pulsating torque in concentrated-wound interior permanent magnet machines to achieve maximum average torque under an open-phase fault condition', in 2016 IEEE 8th International Power Electronics and Motion Control Conference, IPEMC-ECCE Asia 2016, IEEE, Hefei, China, pp. 2813 - 2819, presented at
, 2016, 'An extended dq model for concentrated-wound interior permanent magnet machines considering non-ideal machine parameters', in IET Conference Publications, Institution of Engineering and Technology (IET), Glasgow, UK, pp. 6 .-6 ., presented at
, 2016, 'Control strategy of post-fault operation in dual inverter-fed, PMSM considering zero sequence and back-emf harmonic', in IET Conference Publications, Glasgow, UK, presented at
, 2016, 'Operation along the maximum torque per voltage trajectory in a direct torque and flux controlled interior permanent magnet synchronous motor', in IET Conference Publications, Institution of Engineering and Technology (IET), pp. 6 .-6 ., presented at
, 2015, 'Modified efficiency optimization control for fractional slot concentrated wound interior permanent magnet synchronous generators', IEEE, Yokohama, Japan, pp. 002986 - 002991, presented at
, 2015, 'Anomalies in experimental measurement of operational inductances of a concentrated-wound IPM machine under field-weakening region', IEEE, Yokohama, Japan, pp. 004880 - 004885, presented at
, 2015, 'Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding', IEEE, Yokohama, Japan, pp. 002998 - 003003, presented at
, 2015, 'Deep flux weakening control of a segmented interior permanent magnet synchronous motor with maximum torque per voltage control', IEEE, Yokohama, Japan, pp. 004802 - 004807, presented at
, 2015, 'Inductances of a fractional-slot concentrated-winding interior PM synchronous machine considering effects of saturation and cross magnetization', IEEE, Montreal, QC, pp. 6075 - 6081, presented at
, 2015, 'A preliminary study of the effect of saturation and cross-magnetization on the inductances of a fractional-slot concentrated-wound interior PM synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 828 - 833, http://dx.doi.org/10.1109/PEDS.2015.7203522
, 2015, 'Efficiency analysis of a 42- pole/54-slot fractional-slot concentrated-wound interior permanent magnet synchronous machine', in Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1041 - 1046, http://dx.doi.org/10.1109/PEDS.2015.7203472
https://orcid.org/0000-0002-8232-3537