Select Publications

Book Chapters

Rahman F; Dutta R; Xiao D, 2019, 'Chapter 2 Electric machines, dynamic models and sensors in drive systems', in Modeling, Simulation and Control of Electrical Drives, Institution of Engineering and Technology, Stevenage, United Kingdom, pp. 15 - 62, http://dx.doi.org/10.1049/PBCE118E

Rahman MF; Dutta R; Xiao D, 2019, 'Electric machines, dynamic models and sensors in drive systems', in Modeling, Simulation and Control of Electrical Drives, Institution of Engineering and Technology, pp. 15 - 62, http://dx.doi.org/10.1049/pbce118e_ch2

Rahman F; Dutta R, 2013, 'AC Motor Control Applications in Vehicle Traction', in AC Electric Motors Control: Advanced Design Techniques and Applications, Wiley, Somerset, NJ, USA, pp. 453 - 486, http://www.scopus.com/inward/record.url?eid=2-s2.0-84886977862&partnerID=40&md5=9e16883a1dcd0d842d3ce02aa420ff5b

Rahman F; Dutta R, 2013, 'Control of Interior Permanent Magnet Synchronous Machines', in AC Electric Motors Control: Advanced Design Techniques and Applications, Wiley & Sons, Ltd, pp. 398 - 428, http://www.scopus.com/inward/record.url?eid=2-s2.0-84886961964&partnerID=40&md5=c0faa5eb37cd2303a7ff96a12bf3eb0e

Journal articles

Dutta R, 2023, 'Maximising energy efficiency with electric motors', Open Access Government, 39, pp. 554 - 555, http://dx.doi.org/10.56367/oag-039-10891

Rahman A; Dutta R; Chu G; Xiao D; Thippiripati VK; Rahman MF, 2023, 'Open-Winding Permanent Magnet Synchronous Generator for Renewable Energy—A Review', Energies, 16, http://dx.doi.org/10.3390/en16145268

Shakib SMSI; Xiao D; Dutta R; Rahman MF, 2023, 'An optimal maximum torque per active flux and field weakening operation for deadbeat direct torque control based IPMSM drive', IEEE Transactions on Industry Applications, http://dx.doi.org/10.1109/TIA.2023.3340635

Chu G; Dutta R; Xiao D; Fletcher JE; Rahman MF, 2023, 'Development and Optimization of a Mechanically Robust Novel Rotor Topology for Very-high-speed IPMSMs', IEEE Transactions on Energy Conversion, http://dx.doi.org/10.1109/TEC.2023.3258463

Xiao D; Alam KS; Dutta R; Rahman MF, 2021, 'Reduced-Sensors-Based Predictive Controller for LC Filtered Four-Leg Inverters', IEEE Open Journal of Industry Applications, 2, pp. 301 - 309, http://dx.doi.org/10.1109/ojia.2021.3120427

Xiao D; Akter MP; Alam K; Dutta R; Mekhilef S; Rahman MF, 2021, 'Cascaded Predictive Flux Control for a 3-L Active NPC Fed im Drives without Weighting Factor', IEEE Transactions on Energy Conversion, 36, pp. 1797 - 1807, http://dx.doi.org/10.1109/TEC.2021.3065648

Mishra P; Banerjee A; Ghosh M; Gogoi S; Dutta R, 2021, 'Development of a cost-effective circuit hardware architecture for brushless direct current motor driver', International Journal of Circuit Theory and Applications, 49, pp. 2183 - 2198, http://dx.doi.org/10.1002/cta.3011

Dutta R; Pouramin A; Rahman MF, 2021, 'A Novel Rotor Topology for High-Performance Fractional Slot Concentrated Winding Interior Permanent Magnet Machine', IEEE Transactions on Energy Conversion, 36, pp. 658 - 670, http://dx.doi.org/10.1109/TEC.2020.3030302

Pouramin A; Dutta R; Farshadnia M; Rahman MF, 2020, 'A Standstill Method to Measure Electromagnetically Induced Torque Ripple of Permanent Magnet Synchronous Machines', IEEE Transactions on Instrumentation and Measurement, 69, pp. 7627 - 7635, http://dx.doi.org/10.1109/TIM.2020.2983528

Chu G; Dutta R; Pouramin A; Rahman MF, 2020, 'Analysis of torque ripple of a spoke-type interior permanent magnet machine', Energies, 13, http://dx.doi.org/10.3390/en13112886

Chu G; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2020, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of Interior Permanent-Magnet Synchronous Machines', IEEE Transactions on Industry Applications, 56, pp. 1321 - 1331, http://dx.doi.org/10.1109/TIA.2019.2960756

Wu F; Ge H; El-Refaie AM; Farshadnia M; Pouramin A; Dutta R, 2020, 'Partially-Coupled d-q-0 Components of Magnetically-Isolated FSCW IPM Machines with Open-End-Winding Drives', IEEE Transactions on Industry Applications, 56, pp. 1397 - 1407, http://dx.doi.org/10.1109/TIA.2020.2964251

Sapkota P; Boyer C; Dutta R; Cazorla C; Aguey-Zinsou KF, 2020, 'Planar polymer electrolyte membrane fuel cells: Powering portable devices from hydrogen', Sustainable Energy and Fuels, 4, pp. 439 - 468, http://dx.doi.org/10.1039/c9se00861f

Ekanayake S; Dutta R; Rahman MF; Bui MX, 2019, 'Performances of a Fractional-Slot Concentrated-Winding Permanent Magnet Synchronous Machine under Position Sensorless Control in Deep Flux-Weakening Region', IEEE Transactions on Industry Applications, 55, pp. 5938 - 5946, http://dx.doi.org/10.1109/TIA.2019.2931269

Ekanayake S; Dutta R; Rahman MF; Xiao D, 2018, 'Direct torque and flux control of interior permanent magnet synchronous machine in deep flux-weakening region', IET Electric Power Applications, 12, pp. 98 - 105, http://dx.doi.org/10.1049/iet-epa.2017.0147

Ahsanullah K; Dutta R; Rahman MF, 2017, 'Analysis of Low-Speed IPMMs with Distributed and Fractional Slot Concentrated Windings for Wind Energy Applications', IEEE Transactions on Magnetics, 53, http://dx.doi.org/10.1109/TMAG.2017.2726117

Farshadnia M; Cheema MAM; Pouramin A; Dutta R; Fletcher JE, 2017, 'Design of Optimal Winding Configurations for Symmetrical Multiphase Concentrated-Wound Surface-Mount PMSMs to Achieve Maximum Torque Density under Current Harmonic Injection', IEEE Transactions on Industrial Electronics, 65, pp. 1751 - 1761, http://dx.doi.org/10.1109/TIE.2017.2745464

Farshadnia M; Cheema MAM; Dutta R; Fletcher J; Rahman M, 2017, 'Detailed Analytical Modelling of Fractional-Slot Concentrated-Wound Interior Permanent Magnet Machines for Prediction of Torque Ripple', IEEE Transactions on Industry Applications, 53, pp. 5272 - 5283, http://dx.doi.org/10.1109/TIA.2017.2722418

Farshadnia M; Cheema MAM; Dutta R; Fletcher JE, 2017, 'Analytical Modeling of Armature Reaction Air-Gap Flux Density Considering the Non-Homogeneously Saturated Rotor in a Fractional-Slot Concentrated-Wound IPM Machine', IEEE Transactions on Magnetics, 53, http://dx.doi.org/10.1109/TMAG.2016.2623797

Nguyen D; Dutta R; Rahman MF; Fletcher JE, 2016, 'Performance of a Sensorless Controlled Concentrated-Wound Interior Permanent-Magnet Synchronous Machine at Low and Zero Speed', IEEE Transactions on Industrial Electronics, 63, pp. 2016 - 2026, http://dx.doi.org/10.1109/TIE.2015.2506138

Dutta R; Ahsanullah K; Rahman F, 2016, 'Cogging torque and torque ripple in a direct-drive interior permanent magnet generator', Progress In Electromagnetics Research B, 70, pp. 73 - 85, http://dx.doi.org/10.2528/PIERB16072001

Chai M; Xiao D; Dutta R; Fletcher JE, 2016, 'Space vector PWM techniques for three-to-five-phase indirect matrix converter in the overmodulation region', IEEE Transactions on Industrial Electronics, 63, pp. 550 - 561, http://dx.doi.org/10.1109/TIE.2015.2475416

Dutta R; Ahsanullah K; Rahman MF, 2014, 'Preliminary Design Analysis of Low Speed Interior Permanent Magnet Machine with Distributed and Concentrated Windings', JICEMS (Journal of International Conference on Electrical Machines and Systems), 2, pp. 139 - 147, http://www.jicems.org/ltkpsweb/pub/pubregistrationview.aspx?ppseq=233&from=pubissue.aspx?puseq=67

Alshibani S; Agelidis VG; Dutta R, 2014, 'Lifetime cost assessment of permanent magnet synchronous generators for mw level wind turbines', IEEE Transactions on Sustainable Energy, 5, pp. 10 - 17, http://dx.doi.org/10.1109/TSTE.2013.2271781

Dutta R; Chong L; Rahman MF, 2014, 'Review of the impact of parameter variation on the operating speed range of the interior permanent magnet synchronous machine', Australian Journal of Electrical & Electronic Engineering, 11, pp. 10 - 17, https://www.tandfonline.com/doi/abs/10.7158/1448837X.2014.11464409

Dutta R; Chong L; Rahman MF, 2013, 'Design and experimental verification of an 18-slot/14-pole fractional-slot concentrated winding interior permanent magnet machine', IEEE Transactions on Energy Conversion, 28, pp. 181 - 190, http://dx.doi.org/10.1109/TEC.2012.2229281

Dutta R; Rahman MF; Chong GL, 2012, 'Winding Inductances of an Interior Permanent Magnet (IPM) Machine With Fractional Slot Concentrated Winding', IEEE Transactions on Magnetics, 48, pp. 4842 - 4849, http://dx.doi.org/10.1109/TMAG.2012.2203140

Chong GL; Dutta R; Rahman MF, 2010, 'Electromagnetic Losses in a 1kW Concentric Wound IPM Machine for Field Weakening Applications', Journal of Applied Superconductivity and Electromagnetics (JASEM), 1, pp. 95 - 100, http://association-asem.org/General_Information

Chong GL; Dutta RD; Rahman MF, 2009, 'Application of concentrated windings in the interior permanent magnet machine', Australian Journal of Electrical and Electronics Engineering, 5, pp. 229 - 236

Dutta RD; Rahman MF, 2008, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', IEEE Transactions on Energy Conversion, 23, pp. 25 - 33, http://dx.doi.org/10.1109/TEC.2007.905061

Dutta RD; Rahman MF, 2007, 'Analysis and comparison of methods for determining d- and q-axes inductances of IPM machines', Australian Journal of Electrical and Electronics Engineering, 3, pp. 189 - 199

Rahman MF; Dutta RD, 2006, 'A comparative analysis of two test methods of measuring d- and q-axes inductances of interior permanent-magnet machine', IEEE Transactions on Magnetics, 42, pp. 3712 - 3718

Dutta RD; Rahman MF, 2005, 'Interior Permanent Magnet Generator: Generator of New Millennium', International Energy Journal, 6, pp. 51 - 57

Conference Papers

Gao M; Chu G; Dutta R; Rahman A, 2023, 'Improved Deadtime Compensation Method Considering Currrent Ripple', in 2023 IEEE International Conference on Energy Technologies for Future Grids (ETFG), IEEE, presented at 2023 IEEE International Conference on Energy Technologies for Future Grids (ETFG), 03 December 2023 - 06 December 2023, http://dx.doi.org/10.1109/etfg55873.2023.10408393

Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Suppression Analysis of Zero-sequence Current Under Magnet Fault in an Open-winding Permanent Magnet Synchronous Machine', in 2023 IEEE International Conference on Energy Technologies for Future Grids (ETFG), IEEE, presented at 2023 IEEE International Conference on Energy Technologies for Future Grids (ETFG), 03 December 2023 - 06 December 2023, http://dx.doi.org/10.1109/etfg55873.2023.10408221

Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Analysis of Zero Sequence Current in an Open Winding Permanent Magnet Synchronous Machine Under Rotor Magnet Fault Condition', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 5321 - 5328, http://dx.doi.org/10.1109/ECCE53617.2023.10362902

Gao M; Chu G; Dutta R; Rahman A; Xiao D, 2023, 'Improvement of Inductance Measurement of IPMSM', in 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, pp. 4302 - 4307, http://dx.doi.org/10.1109/ECCE53617.2023.10362093

Jing B; Dutta R; Rahman MF; Xiao D, 2022, 'Evaluation of an isolated and modular Bi-directional Power Converter for Charging Battery/Ultra-Capacitors for EV', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058062

Gao M; Chu G; Dutta R; Xiao D, 2022, 'Loss Analysis of a High-Speed IPMSM using Different Trajectory Control', in 2022 IEEE Energy Conversion Congress and Exposition, ECCE 2022, http://dx.doi.org/10.1109/ECCE50734.2022.9947821

Shakib SMSI; Xiao D; Dutta R; Rahman MF, 2022, 'Online Deadbeat Predictive Direct Torque and Active Flux Control for IPMSM Drive', in 2022 International Power Electronics Conference, IPEC-Himeji 2022-ECCE Asia, pp. 2479 - 2483, http://dx.doi.org/10.23919/IPEC-Himeji2022-ECCE53331.2022.9806977

Rahman A; Xiao D; Chu G; Dutta R; Rahman MF, 2022, 'Performance analysis of MPC-based Zero Sequence Current Controllers in an Open- Winding PMSM', in 2022 IEEE 7th Southern Power Electronics Conference, SPEC 2022, http://dx.doi.org/10.1109/SPEC55080.2022.10058305

Showybul Islam Shakib SM; Xiao D; Dutta R; Rahman MF, 2021, 'Deadbeat Predictive Direct Torque and Active Flux Control with Disturbance Observer', in IECON Proceedings (Industrial Electronics Conference), http://dx.doi.org/10.1109/IECON48115.2021.9589079

Chu G; Dutta R; Fletcher J; Lovatt H; Rahman MF, 2021, 'Analytical Calculation of the Mechanical Stress on IPMSM Bridges with Decomposition of the Centrifugal Force', in 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings, pp. 4639 - 4645, http://dx.doi.org/10.1109/ECCE47101.2021.9595665

Chu G; Lovatt H; Rahman MF; Dutta R, 2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in ECCE 2020 - IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805, http://dx.doi.org/10.1109/ECCE44975.2020.9235827

Zhang R; Zhang D; Dutta R, 2019, 'Study on PCB Based Litz Wire Applications for Air-Core Inductor and Planar Transformer', in 2019 9th International Conference on Power and Energy Systems, ICPES 2019, http://dx.doi.org/10.1109/ICPES47639.2019.9105549

Chu G; Pouramin A; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019, pp. 6092 - 6098, http://dx.doi.org/10.1109/ECCE.2019.8912980


Back to profile page