Select Publications
Journal articles
2020, 'Multifunctional MXene/natural rubber composite films with exceptional flexibility and durability', Composites Part B: Engineering, 188, http://dx.doi.org/10.1016/j.compositesb.2020.107875
,2020, 'Investigation of door width towards flame tilting behaviours and combustion species in compartment fire scenarios using large eddy simulation.', International Journal of Heat and Mass Transfer, 150, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.119373
,2020, 'Critical assessment on operating water droplet sizes for fire sprinkler and water mist systems', Journal of Building Engineering, 28, pp. 100999, http://dx.doi.org/10.1016/j.jobe.2019.100999
,2020, 'Characterisation of soot particle size distribution through population balance approach and soot diagnostic techniques for a buoyant non-premixed flame', Journal of the Energy Institute, 93, pp. 112 - 128, http://dx.doi.org/10.1016/j.joei.2019.04.004
,2020, 'Utilising genetic algorithm to optimise pyrolysis kinetics for fire modelling and characterisation of chitosan/graphene oxide polyurethane composites', Composites Part B: Engineering, 182, http://dx.doi.org/10.1016/j.compositesb.2019.107619
,2020, 'Numerical study of the comparison of symmetrical and asymmetrical eddy-generation scheme on the fire whirl formulation and evolution', Applied Sciences (Switzerland), 10, pp. 318, http://dx.doi.org/10.3390/app10010318
,2019, 'A Steam Ejector Refrigeration System Powered by Engine Combustion Waste Heat: Part 2. Understanding the Nature of the Shock Wave Structure', Applied Sciences, 9, pp. 4435 - 4435, http://dx.doi.org/10.3390/app9204435
,2019, 'Influence of eddy-generation mechanism on the characteristic of on-source fire whirl', Applied Sciences (Switzerland), 9, pp. 3989, http://dx.doi.org/10.3390/app9193989
,2019, 'Functionalization of MXene nanosheets for polystyrene towards high thermal stability and flame retardant properties', Polymers, 11, pp. 976, http://dx.doi.org/10.3390/polym11060976
,2019, 'Computational study of wet steam flow to optimize steam ejector efficiency for potential fire suppression application', Applied Sciences (Switzerland), 9, pp. 1486, http://dx.doi.org/10.3390/app9071486
,2019, 'Natural ventilated smoke control simulation case study using different settings of smoke vents and curtains in a large atrium', Fire, 2, pp. 1 - 18, http://dx.doi.org/10.3390/fire2010007
,2019, 'Sensitivity analysis of key parameters for population balance based soot model for low-speed diffusion flames', Energies, 12, pp. 910, http://dx.doi.org/10.3390/en12050910
,2018, 'Predicting the fire spread rate of a sloped pine needle board utilizing pyrolysis modelling with detailed gas-phase combustion', International Journal of Heat and Mass Transfer, 125, pp. 310 - 322, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.04.093
,2017, 'Comparison of detailed soot formation models for sooty and non-sooty flames in an under-ventilated ISO room', International Journal of Heat and Mass Transfer, 115, pp. 717 - 729, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.08.074
,2016, 'Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images', Journal of Nanoparticle Research, 18, pp. 127, http://dx.doi.org/10.1007/s11051-016-3434-x
,2016, 'External Irradiation Effect on the Growth and Evolution of In-Flame Soot Species', Carbon, 102, pp. 161 - 171, http://dx.doi.org/10.1016/j.carbon.2016.02.039
,1989, 'An Investigation of Wool Hydrolysis in Conventional Carbonizing', Textile Research Journal, 59, pp. 232 - 236, http://dx.doi.org/10.1177/004051758905900407
,1989, 'Expanding the Use of the Rapid Ninhydrin Test Method', Textile Research Journal, 59, pp. 671 - 675, http://dx.doi.org/10.1177/004051758905901107
,1987, 'A Rapid and Sensitive Method for Evaluating Wool Damage in Carbonizing', Textile Research Journal, 57, pp. 728 - 730, http://dx.doi.org/10.1177/004051758705701208
,Conference Papers
2024, 'Enhancing Thermal Stability of Carbon Fiber/Phenolic Matrix Composites Using ZrO2 Nanoparticles', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 393 - 399
,2015, 'Development of an in-flame thermophoretic soot sampling device', Melbourne, presented at Australian Combustion Symposium, Melbourne, 07 December 2015 - 09 December 2015, http://www.anz-combustioninstitute.org/local/papers/ACS2015-Proceedings.pdf
,2015, 'External Irradiation Effect on the Evolution of In-flame Soot Species', Melbourne, presented at Australian Combustion Symposium, Melbourne, 07 December 2015 - 09 December 2015
,