ORCID as entered in ROS
https://orcid.org/0000-0003-4009-5262
Select Publications
Journal articles
, 2020, 'Correlations for fire-wind enhancement flow characteristics based on LES simulations', International Journal of Heat and Fluid Flow, 82, http://dx.doi.org/10.1016/j.ijheatfluidflow.2020.108558
, 2020, 'LES simulation of terrain slope effects on wind enhancement by a point source fire', Case Studies in Thermal Engineering, 18, pp. 100588, http://dx.doi.org/10.1016/j.csite.2020.100588
, 2020, 'Numerical study of inlet air swirl intensity effect of a Methane-Air Diffusion Flame on its combustion characteristics', Case Studies in Thermal Engineering, 18, pp. 100610, http://dx.doi.org/10.1016/j.csite.2020.100610
, 2020, 'The nonlinear response of Cattaneo-type thermal loading of a laser pulse on a medium using the generalized thermoelastic model', Theoretical and Applied Mechanics Letters, 10, pp. 286 - 297, http://dx.doi.org/10.1016/j.taml.2020.01.030
, 2020, 'The time dependent investigation of methane-air counterflow diffusion flames with detailed kinetic and pollutant effects into a micro/macro open channel', Case Studies in Thermal Engineering, 18, pp. 100603, http://dx.doi.org/10.1016/j.csite.2020.100603
, 2020, 'A statistical approach to investigate the effects of multicomponent fractions on the mechanical properties of PP/PPMA/Talc/POE composites', Journal of Polymer Research, 27, http://dx.doi.org/10.1007/s10965-020-2042-8
, 2020, 'Towards eco-flowable concrete production', Sustainability (Switzerland), 12, pp. 1 - 17, http://dx.doi.org/10.3390/su12031208
, 2019, 'Numerical analysis of wind velocity effects on fire-wind enhancement', International Journal of Heat and Fluid Flow, 80, http://dx.doi.org/10.1016/j.ijheatfluidflow.2019.108471
, 2019, 'Investigation of terrain slope effects on wind enhancement by a line source fire', Case Studies in Thermal Engineering, 14, http://dx.doi.org/10.1016/j.csite.2019.100467
, 2019, 'Economic feasibility of energy recovery from waste plastic using pyrolysis technology: an Australian perspective', International Journal of Environmental Science and Technology, 16, pp. 3721 - 3734, http://dx.doi.org/10.1007/s13762-019-02293-8
, 2019, 'Thermodynamic-based exergy analysis of precious metal recovery out of waste printed circuit board through black copper smelting process', Energies, 12, http://dx.doi.org/10.3390/en12071313
, 2018, 'Bridge Abutment Movement and Approach Settlement - A Case Study and Scenario Analysis', International Journal of Structural Stability and Dynamics, 18, http://dx.doi.org/10.1142/S0219455418400114
, 2018, 'Development of an innovative modular foam-filled panelized system for rapidly assembled postdisaster housing', Buildings, 8, http://dx.doi.org/10.3390/buildings8080097
, 2018, 'Thermodynamic analysis of metals recycling out of waste printed circuit board through secondary copper smelting', Journal of Material Cycles and Waste Management, 20, pp. 386 - 401, http://dx.doi.org/10.1007/s10163-017-0590-8
, 2018, 'Investigation into the Recovery of Valuable Metals from Waste Mobile Phone Printed Circuit Boards (PCBs): An Australian Case Study', International Journal of Waste Resources, 8, pp. 1 - 9, http://dx.doi.org/10.4172/2252-5211.1000358
, 2017, 'A Comparative Life Cycle Assessment of Recycling the Platinum Group Metals from Automobile Catalytic Converter: An Australian Perspective', METALLURGICAL AND MATERIALS TRANSACTIONS E-MATERIALS FOR ENERGY SYSTEMS, 4, pp. 77 - 88, http://dx.doi.org/10.1007/s40553-017-0109-1
, 2017, 'A thermodynamic-based life cycle assessment of precious metal recycling out of waste printed circuit board through secondary copper smelting', Environmental Development, 24, pp. 36 - 49, http://dx.doi.org/10.1016/j.envdev.2017.07.001
, 2017, 'Automated spatial design of multi-story modular buildings using a unified matrix method', Automation in Construction, 82, pp. 31 - 42, http://dx.doi.org/10.1016/j.autcon.2017.06.025
, 2017, 'Remedial modelling of steel bridges through application of analytical hierarchy process (AHP)', Applied Sciences (Switzerland), 7, pp. 168, http://dx.doi.org/10.3390/app7020168
, 2016, 'Computational investigation of the effect of particle density on the multiphase flows and performance of hydrocyclone', Minerals Engineering, 90, pp. 55 - 69, http://dx.doi.org/10.1016/j.mineng.2016.03.017
, 2016, 'Techno economic analysis of electronic waste processing through black copper smelting route', Journal of Cleaner Production, 126, pp. 178 - 190, http://dx.doi.org/10.1016/j.jclepro.2016.03.033
, 2014, 'Numerical analysis of hydrocyclones with different conical section designs', Minerals Engineering, 62, pp. 74 - 84, http://dx.doi.org/10.1016/j.mineng.2013.12.003
, 2014, 'Numerical analysis of hydrocyclones with different vortex finder configurations', Minerals Engineering, 63, pp. 125 - 138, http://dx.doi.org/10.1016/j.mineng.2014.02.003
, 2013, 'Computational study of the multiphase flow and performance of hydrocyclones: Effects of cyclone size and spigot diameter', Industrial and Engineering Chemistry Research, 52, pp. 16019 - 16031, http://dx.doi.org/10.1021/ie402267b
Conference Papers
, 2023, '3D CFD modeling of the Effect of Sloped Terrain on Dynamics of Wildfires in Wildland Urban Interface', in Dlugogorski BZ; Masri AR (ed.), Proceedings of the Australian Combustion Symposium 2023, Charles Darwin University, Darwin, Australia, pp. 78 - 78, presented at
, 2023, 'Effect of Fire Intensity on Wildfire Interaction with Multiple Structures', in Dlugogorsk BZ; Masri AR (ed.), Proceedings of the Australian Combustion Symposium, Darwin, Australia, pp. 82 - 82, presented at
, 2023, 'Analysis of the Wind Flow and Fuel Heat Release Rate on Dynamics of Wildfire', in Tokumasu T; Ahn J (ed.), Twentieth International Conference on Flow Dynamics Proceedings, Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, pp. 108 - 108, presented at
, 2023, 'An Artificial Neural Network Model for Predicting Hydraulic Diameters in Pillow-Plate Heat Exchangers', in Tokumasu T; Ahn J (ed.), Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2023, 'A Novel Method in Predicting Heat Transfer Coefficient and Pressure Drop in Pillow-Plate Heat Exchangers', in Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at
, 2023, 'An investigation of the heating, drying, and pyrolysis process of two separate moisturized cellulosic leaves', in Proceedings of the International Congress on Modelling and Simulation, MODSIM, pp. 214 - 220
, 2023, 'Effect of wind speed on wildfire interaction with multiple structures in the wildland–urban interface', in Proceedings of the International Congress on Modelling and Simulation, MODSIM, pp. 255 - 261
, 2022, 'Modelling and Statistical Analysis of Plastic Steam Gasification', in Lei C; Thornber B; Armfield S (eds.), Proceedings of the 23rd Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Sydney, Australia, pp. 1 - 8, presented at
, 2022, 'Modelling the moisture effect on the rate of spread of fire in a leaf-like fuel element', in Lei C; Thornber B; Armfield S (eds.), Australasian Fluid Mechanics Society, Sydney, presented at
, 2020, 'CFD modeling of unsteady Counterflow flame into Rhodium catalytic chamber', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at
, 2020, 'CFD Study of Evaporative Cooling System Integrated to a Windcatcher', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at
, 2018, 'CFD investigation of cross-flow effects on fire-wind enhancement', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Recovery of platinum group metals out of automotive catalytic converters scrap: A review on australian trends and challenges', in Minerals, Metals and Materials Series, pp. 149 - 161, http://dx.doi.org/10.1007/978-3-319-72131-6_13
, 2018, 'Review of the most common repair techniques for reinforced concrete structures in coastal areas', in IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World - Report, pp. 370 - 377
, 2018, 'Techno-economic analysis of energy recovery from plastic waste', in Minerals, Metals and Materials Series, pp. 13 - 24, http://dx.doi.org/10.1007/978-3-319-72138-5_2
, 2018, 'Thermodynamic analysis of incineration treatment of waste disposable syringes in an EAF steelmaking process', in Minerals, Metals and Materials Series, pp. 77 - 88, http://dx.doi.org/10.1007/978-3-319-72362-4_7
, 2017, 'Case study: Structural health monitoring of timber bridges using dynamic frequency analysis (DFA)', in SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings, pp. 1262 - 1271
, 2017, 'Life cycle assessments of incineration treatment for sharp medical waste', pp. 131 - 143, http://dx.doi.org/10.1007/978-3-319-52192-3_14
, 2016, 'Evaluation of E-waste processing through secondary copper smelting', in High Temperature Processing Symposium, High Temperature Processing Symposium 2016 Swinburne University of Technology, Swinburne University of Technology, pp. 30 - 31, presented at
, 2012, 'CFD Study of the multiphase flow in classifying hydrocyclone: effect of cone geometry', in Proceedings of Ninth International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, presented at
, 2008, 'Decision support system for RFID', in 6th International Industrial Simulation Conference 2008, ISC 2008, pp. 313 - 316
Conference Abstracts
, 2023, 'Numerical Modeling of Smoke Plume Dynamics in Wildland Urban Interface', in 25th International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand, Modelling and Simulation Society of Australia and New Zealand, Darwin, Australia, presented at MODSIM2023, 25th International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand, Darwin, Australia, http://dx.doi.org/10.36334/modsim.2023.ghodrat420
, 2023, 'Real-time prediction of wind–fire interaction using a CFD-based deep neural network framework: A methodological approach', in MODSIM2023, 25th International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand, Darwin Australia, presented at MODSIM2023, 25th International Congress on Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand, Darwin Australia, http://dx.doi.org/10.36334/modsim.2023.ghodrat425
, 2019, 'Evaluation of the Usage of Recycled Polypropylene and Fly Ash in Modified Polypropylene-Based Composites Used in Automotive Industry', in Proceedings of 2019 International Conference on Resource Sustainability - Cities (icRS Cities), ISSN, Adelaide, Australia, presented at International Conference on Resource Sustainability - Cities (icRS Cities), Adelaide, Australia, 01 July 2019 - 03 July 2019
, 2019, 'Optimization of Blade Mount Point and Pre-set Pitch in a Conventional Small Vertical Axis Wind Turbin', in Proceedings of 2019 International Conference on Resource Sustainability - Cities (icRS Cities), SSRN, Adelaide, Australia, presented at International Conference on Resource Sustainability - Cities (icRS Cities), Adelaide, Australia, 01 July 2019 - 03 July 2019
Preprints
, 2018, Development of an Innovative Modular Foam-Filled Panelised System for Rapidly Assembled Post Disaster Housing<strong> </strong>, http://dx.doi.org/10.20944/preprints201806.0339.v1
Filter by type
https://orcid.org/0000-0003-4009-5262