By Mr Othman Shukri Abdelkarim Abu Laban

Journal articles

Laban O; Pearce G; Zhang J; Islam MS; Djukic LP, 2024, 'A comparative study of the cryogenic performance of CFRP composites with polyethersulfone/epoxy blends and electrospun polyethersulfone interleaves', Composites Part A: Applied Science and Manufacturing, 178, http://dx.doi.org/10.1016/j.compositesa.2023.108000

Laban O; Mahdi E; Samim S; Cabibihan JJ, 2021, 'A comparative study between polymer and metal additive manufacturing approaches in investigating stiffened hexagonal cells', Materials, 14, pp. 1 - 11, http://dx.doi.org/10.3390/ma14040883

Laban O; Mahdi E; Cabibihan JJ, 2021, 'Prediction of neural space narrowing and soft tissue injury of the cervical spine concerning head restraint arrangements in traffic collisions', Applied Sciences (Switzerland), 11, pp. 1 - 12, http://dx.doi.org/10.3390/app11010145

Laban O; Gowid S; Mahdi E; Musharavati F, 2020, 'Experimental investigation and artificial intelligence-based modeling of the residual impact damage effect on the crashworthiness of braided Carbon/Kevlar tubes', Composite Structures, 243, http://dx.doi.org/10.1016/j.compstruct.2020.112247

Alkhatib SE; Matar MS; Tarlochan F; Laban O; Mohamed AS; Alqwasmi N, 2019, 'Deformation modes and crashworthiness energy absorption of sinusoidally corrugated tubes manufactured by direct metal laser sintering', Engineering Structures, 201, http://dx.doi.org/10.1016/j.engstruct.2019.109838

Mohamed AS; Laban O; Tarlochan F; Al Khatib SE; Matar MS; Mahdi E, 2019, 'Experimental analysis of additively manufactured thin-walled heat-treated circular tubes with slits using AlSi10Mg alloy by quasi-static axial crushing test', Thin-Walled Structures, 138, pp. 404 - 414, http://dx.doi.org/10.1016/j.tws.2019.02.022

Laban O; Mahdi E, 2017, 'Enhancing mode I inter-laminar fracture toughness of aluminum/fiberglass fiber-metal laminates by combining surface pre-treatments', International Journal of Adhesion and Adhesives, 78, pp. 234 - 239, http://dx.doi.org/10.1016/j.ijadhadh.2017.08.008

Laban O; Mahdi E, 2016, 'Energy Absorption Capability of Cotton Fiber/Epoxy Composite Square and Rectangular Tubes', Journal of Natural Fibers, 13, pp. 726 - 736, http://dx.doi.org/10.1080/15440478.2015.1130003

Ibrahim AS; Ahmed SF, 2015, 'Measurements of Laminar Flame Speeds of Alternative Gaseous Fuel Mixtures', Journal of Energy Resources Technology, 137, http://dx.doi.org/10.1115/1.4029738

Conference Papers

Laban O; Gowid S; Mahdi E, 2020, 'Experimental Investigation and Uncertainty Prediction of the Load-Carrying Capacity of Composite Double Hat for Lattice Core Sandwich Panels Using Artificial Neural Network', in 2020 IEEE International Conference on Informatics, IoT, and Enabling Technologies, ICIoT 2020, pp. 67 - 72, http://dx.doi.org/10.1109/ICIoT48696.2020.9089603

Back to profile page