Select Publications
Conference Papers
2012, 'Effect of channel pressure difference in heat transfer enhancement in micro-channel with synthetic jet', in International Symposium on Advances in Computational Heat Transfer, pp. 897 - 915, http://dx.doi.org/10.1615/ICHMT.2012.CHT-12.550
,2012, 'Numerical and experimental investigation of unsteady natural convection in an open channel', in International Symposium on Advances in Computational Heat Transfer, pp. 1507 - 1525, http://dx.doi.org/10.1615/ICHMT.2012.CHT-12.910
,2011, 'Effect of the Variable Properties on Heat Transfer in Micro-Channel with Synthetic Jet', in Soria J (ed.), 9AHMTC Organization, Monash University, Monash University, Melbourne, pp. 1 - 16, presented at 9th Australasian Heat and Mass Transfer Conference, Monash, Melbourne, 02 November 2011 - 04 November 2011
,2011, 'Modelling Bubbly-Cap Flows Uing Two-Group Average Bubble Number Density', in the 14th International Topical Meeting on Nuclear reactor Thermalhydraulics, CNS-SNC, Canada, pp. 1 - 12, presented at The 14th International Topical Meeting on Nuclear reactor Thermalhydraulics, Toronto, Canada, 25 September 2011 - 30 September 2011
,2011, 'Direct Quadrature Method of Moments (DQMOM) Approach for Vertical Gas-Liquid Bubbly Flows of Large Pipe', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 11, presented at Chemeca 2011, Sydney, 18 September 2011 - 21 September 2011
,2010, 'Nanoparticle Dynamics in a Viscous Fluid at Small Reynolds Numbers', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 868 - 877, presented at 6th Australasian Congress on Applied Mechanics, Perth, W.A., 12 December 2010 - 15 December 2010, http://search.informit.com.au/documentSummary;dn=017398490579045;res=IELENG
,2010, 'An Assessment of Average Bubble Number Density Model for Bubbly Flows', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 535 - 538, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010
,2010, 'Intersection Marker (ISM) Method for Tracking a Deformable 2D Surface in 3D Eulerian Space', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 142 - 145, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010
,2010, 'Numerical and Experimental Investigation of Air Flow in Refrigerated Display Cabinets', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 824 - 827, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010
,2010, 'On Modelling Horizontal Gas-Liquid Flow using Population Balance Approach', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 531 - 534, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010
,2010, 'Challenges in Modelling Gas-Liquid Flows: Bubbly Flow Regime and Beyond', in Transactions of the American Nuclear Society and Embedded Topical Meeting Isotopes for Medicine and Industry, American Nuclear Society (ANS), La Grange Park, Illinois, pp. 914 - 916, presented at 2010 ANS Winter Meeting and Nuclear technology Expo, Riviera Hotel, Las Vegas, Nevada, 07 November 2010 - 11 November 2010
,2010, 'Mechanistic Modelling of Verical Subcooled Boiling Flows', in Proceedings of Chemeca 2010: The 40th Annual Australasian Chemical and Process Engineering Conference, Engineers Australia, Australia, pp. 1 - 11, presented at Chemeca 2010, Hilton Hotel, Adelaide, 26 September 2010 - 29 September 2010
,2010, 'On Modelling the Phase Distribution of Gas-Liquid Bubbly Flow in a Horizontal Pipe', in Proceedings of Chemeca 2010: The 40th Annual Australasian Chemical and Process Engineering Conference, Engineers Australia, Australia, pp. 1 - 7, presented at Chemeca 2010, Hilton Hotel, Adelaide, 26 September 2010 - 29 September 2010
,2010, 'Three-dimensional Modelling of Heat Transfer in Micro-Channels with Synthetic Jet', in Proceedings of the 14th International Heat Transfer Conference IHTC14, ASME, USA, pp. 1 - 10, presented at International Heat Transfer Conference, Omni Shoreham Hotel, WAshington D.C., 08 August 2010 - 13 August 2010, http://www.asmeconferences.org/ihtc14/
,2010, 'A Comprehensive Mechanistic Model for the Prediction of Vertical Subcooled Boiling Flow', in ICMF2010 - 7th International Conference on Multiphase Flow, The University of Florida, Florida, pp. 1 - 12, presented at 7th International Conference on Multiphase Flow, University of Florida, Tampa, Florida, 04 June 2010
,2009, 'Modelling of Polydispersed Flows Using Two Population Balance Approaches', in PROCEEDINGS OF THE 2ND INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL MECHANICS AND THE 12TH INTERNATIONAL CONFERENCE ON THE ENHANCEMENT AND PROMOTION OF COMPUTATIONAL METHODS IN ENGINEERING AND SCIENCE, American Institute of Physics, United States of America, pp. 809 - 814, presented at 2nd International Symposium on Computational Mechanics (ISCM II) & the 12th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC XII), Hong Kong & Macau, Chian, 30 November 2009 - 03 December 2009, http://link.aip.org/link/?APCPCS/1207/809/1
,2009, 'Numerical Study on the Turbulent Flow Structures of a Buoyant Pool Fire', in PROCEEDINGS OF THE 2ND INTERNATIONAL SYMPOSIUM ON COMPUTATIONAL MECHANICS AND THE 12TH INTERNATIONAL CONFERENCE ON THE ENHANCEMENT AND PROMOTION OF COMPUTATIONAL METHODS IN ENGINEERING AND SCIENCE, American Institute of Physics, United States of America, pp. 875 - 880, presented at 2nd International Symposium on Computational Mechanics (ISCM II) & the 12th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC XII), Hong Kong & Macau, Chian, 30 November 2009 - 03 December 2009
,2009, 'Bubble Condensation in Forced Convective Subcooled Boiling Flows', in 7th ECI International Conference on Boiling Heat Transfer 2009 (ICBHT 2009), Curran Associates, Inc., United States of America, presented at 7th ECI Conference on Boiling, Florianopolis-SC, Brazil, 03 May 2009 - 07 May 2009
,2009, 'Numerical study on population balance approaches in modeling of isothermal vertical bubbly flows', in Computational Fluid Dynamics 2008, pp. 599 - 604, http://dx.doi.org/10.1007/978-3-642-01273-0_79
,2008, 'Application of artificial neural network and genetic algorithm to optimization of design parameters in compartment fire', in International Symposium on Advances in Computational Heat Transfer
,2007, 'Assessment of effect of bubble departure frequency in forced convection subcooled boiling', in Proceedings of the 16th Australasian Fluid Mechanics Conference, 16AFMC, pp. 848 - 855
,2006, 'Tracking of bubbles using InterSection Marker (ISM) method', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
,2005, 'Phenomenological investigation of gas-liquid flows', in Transactions of the American Nuclear Society, pp. 408 - 409
,2005, 'Heat transfer enhancement in micro-channels by synthetic jets.', in Progress in Computational heat and Mass Transfer, Paris, France, presented at Computational Heat and Mass Transfers, Paris, France, 17 May 2005 - 20 May 2005
,2004, 'Flow instability prediction in low-pressure subcooled boiling flows using computational fluid dynamics codes', in ANZIAM Journal
,2004, 'Numerical simulation and analysis of fire-induced hot gases in vertical shaft', in Progress in Safety Science and Technology Volume 4:Proceedings of the 2004 International Symposium on Safety Science and Technology, pp. 2471 - 2476
,2004, 'Application of artificial neural network and genetic algorithm to optimization of design parameters in compartment fire', in International Symposium on Advances in Computational Heat Transfer
,2003, 'Numerical and experimental study of particle rebounding flow characteristics in a gas-particulate flow over curved bodies', in Proceedings of the ASME/JSME Joint Fluids Engineering Conference, pp. 525 - 532
,2003, 'A mechanistic model for predicting subcooled boiling flow', in Proceedings of the ASME/JSME Joint Fluids Engineering Conference, pp. 2121 - 2126, http://dx.doi.org/10.1115/fedsm2003-45571
,2002, 'A numerical study of fire in a two-compartment structure with the inclusion of soot and radiation', in Proceeding of International Heat Transfer Conference 12, Begellhouse, presented at International Heat Transfer Conference 12, 18 August 2002 - 23 August 2002, http://dx.doi.org/10.1615/ihtc12.5270
,2002, 'A numerical study of fire in a two-compartment structure with the inclusion of soot and radiation', in Proceeding of International Heat Transfer Conference 12, Begellhouse, presented at International Heat Transfer Conference 12, 18 August 2002 - 23 August 2002, http://dx.doi.org/10.1615/ihtc12.5000
,2002, 'Improvements in reactor code RELAP5/MOD2 to predict void distribution and flow instability for low-pressure subcooled boiling flows', in Proceeding of International Heat Transfer Conference 12, Begellhouse, presented at International Heat Transfer Conference 12, 18 August 2002 - 23 August 2002, http://dx.doi.org/10.1615/ihtc12.4310
,2000, 'A three-dimensional study of the heat and mass transfer within the irradiation space of the HIFAR fuel element', in Computational Studies, pp. 343 - 351
,1998, 'A computational model for enclosure fires incorporating pyrolysis of cellulosic fuel', in ASME International Mechanical Engineering Congress and Exposition 1998, Anaheim, California, presented at ASME International Mechanical Engineering Congress and Exposition 1998, Anaheim, California, 15 November 1998 - 20 November 1998
,1998, 'Permeability of pyrolysing wood', in 11th International Heat Transfer Conference, Kyongju, Korea, presented at 11th International Heat Transfer Conference, Kyongju, Korea, 23 August 1998 - 28 August 1998
,1996, 'Thermophysical properties for a three-dimensional pyrolysis model for wood', in Heat and Mass Transfer Australasia, University of New South Wales, pp. 257 - 268, presented at 6th Australasian Heat and Mass Transfer Conference, University of New South Wales, 09 December 1996 - 12 December 1996, http://dx.doi.org/10.1615/978-1-56700-099-3.310
,1995, 'Numerical prediction of fire in a large compartment', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
,1995, 'Numerical modelling of the burning of wood in a cone calorimeter', in International Conference on Numerical Methods for Thermal Problems, Atlanta, Georgia USA, presented at International Conference on Numerical Methods for Thermal Problems, Atlanta, Georgia USA
,1995, 'Numerical modelling of the burning of wood in a cone calorimeter', in International Conference on Numerical Methods for Thermal Problems, Atlanta, Georgia USA, presented at International Conference on Numerical Methods for Thermal Problems, Atlanta, Georgia USA
,1995, 'Prediction of piloted ignitibility of wood materials using a one-dimensional pyrolysis model', in ASIAFLAM, Hong Kong, presented at ASIAFLAM, Hong Kong
,1995, 'Prediction of piloted ignition and combustion of wood', in Thermal Science and Engineering, Berkeley, California, USA, presented at Thermal Science and Engineering, Berkeley, California, USA
,1994, 'EXPERIMENTAL AND NUMERICAL STUDY OF THREE-DIMENSIONAL NATURAL CONVECTION AND FREEZING IN WATER', in Proceeding of International Heat Transfer Conference 10, Begellhouse, pp. 1 - 6, presented at International Heat Transfer Conference 10, 14 August 1994 - 18 August 1994, http://dx.doi.org/10.1615/ihtc10.1510
,Conference Presentations
2023, 'STUDY OF BATTERY THERMAL BEHAVIOUR UNDER ABNORMAL HEAT GENERATION', presented at 5th Asia-Oceania Symposium on Fire Safety Materials Science and Engineering, Sydney, 26 August 2023 - 29 August 2023
,2023, 'Multiscale Modelling of Fire Retarded Polymers Composites: The Molecular Dynamics and Computational Fluid Dynamics (MD-CFD) Framework', presented at 7th International Symposium on Fire-Retardant Materials & Technologies, Beijing, China, 17 March 2023 - 19 March 2023
,2020, 'Invited Talk: Role of thermal conductivity on electrical tracking failure of high voltage outdoor insulation', presented at Carbon Materials And Nanotechnology Summit, Singapore, 29 September 2020, https://cman.online/chapter-2/
,Conference Abstracts
2016, 'A RAPID MICROFLUIDIC STAMPING DEVICE FOR STUDYING CARDIAC STEM CELLS AND ENDOTHELIAL CELLS CO-CULTURE', in Proceedings MicroTAS 2016, Dublin, Republic of Ireland, presented at The 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2016), Dublin, Republic of Ireland, 09 October 2016 - 13 October 2016
,2015, 'EFFECTS OF HUMIDITY ON NATURAL CONVECTION IN A DIFFERENTIALLY HEATED CUBIC CAVITY', in Proceedings of CHT-15, Rutgers University, Piscataway, USA, presented at ICHMT International Symposium on Advances in Computational Heat Transfer, Rutgers University, Piscataway, USA, 25 May 2015 - 29 May 2015
,Theses / Dissertations
2019, A Computational Study of Particulate Colloidal Systems, http://dx.doi.org/10.26190/5c7c58a60880f
,2014, On the Prediction of Combustion Products and Soot Particles in Compartment Fires
,Preprints
2018, Comparative Studies on Thermal, Mechanical, and Flame Retardant Properties of PBT Nanocomposites with Functionalized Amino-Carbon Nanotubes Modified by Different Oxidation State Phosphorus-containing Agents, http://dx.doi.org/10.20944/preprints201801.0161.v1
,