ORCID as entered in ROS
https://orcid.org/0000-0003-3483-3759
Select Publications
Conference Papers
, 2019, 'CFD-DEM analysis of realistically heated pebble bed geometry', in 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019, Portland, OR, pp. 1726 - 1739, presented at
, 2019, 'Predictive study of condensing vapour bubble in subcooled boiling flow using intersection marker method', in 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019, Portland, OR, pp. 112 - 126, presented at
, 2019, 'Spray and combustion characterization of gasoline-like fuel under compression ignition conditions: Part II', in 12th Asia-Pacific Conference on Combustion, ASPACC 2019, Fukuoka, Japan, presented at
, 2019, 'Investigation on Dry Band Arcing Induced Tracking Failure on Nanocomposites of EPDM Matrix', in ICEMPE 2019 - 2nd International Conference on Electrical Materials and Power Equipment, Proceedings, IEEE, Guangzhou, China,, pp. 309 - 312, presented at
, 2018, 'Heat transfer modelling of a supercapacitor stack', in International Heat Transfer Conference, Begell House, pp. 3911 - 3918, presented at
, 2018, 'Mixed Convection in Double-Skin Façade-Roof PV Systems: Numerical Study', RMIT University, Melbourne, Australia, presented at
, 2018, 'Effects of radiation on turbulent natural convection and heat transfer in building-integrated photovoltaic systems', RMIT University, Melbourne, Australia, presented at
, 2018, 'CFD study of subcooled boiling in a parallel plate assembly of a research reactor', in Transactions of the American Nuclear Society, American Nuclear Society, Philadelphia, PA, pp. 1042 - 1045, presented at
, 2018, 'CFD-DEM analysis of heated pebble bed geometry', in Transactions of the American Nuclear Society, American Nuclear Society, Philadelphia, PA, pp. 1245 - 1247, presented at
, 2018, 'Analysis of the growth of spherical air bubbles in water due to the interfacial mass transfer by a 3D front-tracking method', in International Heat Transfer Conference, pp. 6153 - 6161, http://dx.doi.org/10.1615/ihtc16.mpf.021240
, 2018, 'Bubble Growth due to Convective Heat Transfer in Micro-gravity Environment', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Bubble Growth due to Convective Heat Transfer in Micro-gravity Environment', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'CFD study of subcooled boiling in a parallel plate assembly of a research reactor', in AISTech - Iron and Steel Technology Conference Proceedings, pp. 1042 - 1045
, 2018, 'CFD-DEM analysis of heated pebble bed geometry', in AISTech - Iron and Steel Technology Conference Proceedings, pp. 1245 - 1247
, 2018, 'Experimental and simulation investigation of propane as a refrigerent for heat pump water heaters', in International Heat Transfer Conference, pp. 7549 - 7557, http://dx.doi.org/10.1615/ihtc16.nee.022158
, 2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2017, 'Combustion measurements of waste cooking oil biodiesel', in Proceedings of the 11th Asia-Pacific Conference on Combustion, The University of Sydney, pp. Paper 208 - Paper 208, presented at
, 2017, 'Experimental study of main-post injection under compression-ignition engine conditions, Part I: Effects of dwell time', in Proceedings of 11th Asia-Pacific Conference on Combustion, The University of Sydney, pp. Paper 209 - Paper 209, presented at
, 2017, 'Experimental study of main-post injection under compression-ignition engine conditions, Part II: Two-color pyrometry', in Proceedings of 11th Asia-Pacific Conference on Combustion, Combustion Institute China Section, The University of Sydney, pp. 775 - 778, presented at
, 2017, 'Multifunctional rubber based composites for marine applications: A review', UNDW， Sydney, presented at
, 2017, 'Numerical simulation of the driving mechanisms of fire whirls using large eddy simulation', UC San Diego, US, presented at
, 2017, 'Heat generation in gold nanorods solutions due to absorption of near-infrared radiation', in Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer May 28-June 1, 2017, Napoli, Italy, pp. 367 - 377, presented at
, 2017, 'Coupled CFD-DEM analysis of bouyant pebble bed experiment', in 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017
, 2017, 'Coupled CFD-DEM analysis of molten salt-cooled pebble-bed reactor experiment', in Transactions of the American Nuclear Society, pp. 1506 - 1509
, 2017, 'Simulating bubble deformations using the intersection marker (ISM) front-tracking method', in Transactions of the American Nuclear Society, pp. 1265 - 1268
, 2016, 'On recent developments of chemical kinetics and fire field model for typical furniture materials', in 2016 International Symposium on Safety Science and Technology, Kunming, Yunnan Province, China, presented at
, 2016, 'Numerical Simulation of Condensation Effect on a Steam Ejector by Wet Steam Model', Sendai, Japan, presented at
, 2016, 'Numerical modelling of magnetic nanoparticle and carrier fluid interactions', in Nanotechnology Materials and Devices Conference, NMDC 2016 - Conference Proceedings, Institute of Electrical and Electronics Engineers (IEEE), Toulouse, France, pp. 1 - 3, presented at
, 2016, 'Is comparison with experimental data a reasonable method of validating computational models?', in Journal of Physics: Conference Series, Krakow, Poland, presented at
, 2016, 'Numerical Study on Small-Scale Fire Whirl using Large Eddy Simulation', in Proceedings of the 3 rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT’16), Avestia Publishing, Ottawa, Canada, presented at
, 2016, 'Recent advancement of soot prediction in fire field model with the incorporation of detailed combustion products for compartment fires', in 8th International Seminar on Fire and Explosion Hazards, Hefei, China, presented at
, 2016, 'OPAL reactor calculations using reactor physics code Serpent', in Physics of Reactors 2016, PHYSOR 2016: Unifying Theory and Experiments in the 21st Century, pp. 2950 - 2960
, 2016, 'Tracking of bubbles using InterSection Marker (ISM) method', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2016, 'Tracking of bubbles using InterSection Marker (ISM) method', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2015, 'A numerical study of multiple smoke vents for large halls', in 7th International Conference on Fire Science and Fire Protection Engineering, Guangzhou, China, presented at
, 2015, 'Numerical modelling of pyrolysis, ignition and combustion of burning of flame-retardant polystyrene', in 1st Asia-Oceania Symposium on Fire Safety Materials Science and Engineering, Suzhou, China, presented at
, 2015, 'An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet', in ISAAT (ed.), Trans Tech Publications, Jeju Island, Korea, pp. 113 - 118, presented at
, 2015, 'Direct numerical simulation of the influence of Stokes number on velocity and particle concentration distributions in particle-laden round jets', in Proceedings of 8th International Symposium on Turbulence, Heat and Mass Transfer, Sarajevo, Bosnia and Herzegovina, presented at
, 2015, 'Three Dimensional Large Eddy Simulation of Blood Flow and Deformation Elastic Constricted Artery', in Zacharie (ed.), International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Japan, pp. 634 - 639, presented at
, 2015, 'Three-dimensional study of natural convection in combined double-skin façade/roof configuration', in Proceedings of CHT-15, Begell House Inc., Rutgers University, Piscataway, USA, presented at
, 2015, 'A novel microfluidic patterning device for neuron-glia co-culture', in MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences, pp. 633 - 635
, 2014, 'Direct Numerical Simulation of Particle Behaviour in a Gas-Solid Three Dimensional Plane Jet', in Proceedings of the 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, presented at
, 2014, 'Holographic Imaging of micron sized droplets at interfaces', in Alam (ed.), Proceedings of the Ninteenth Australasian Fluid Mechanics Conference, presented at
, 2014, 'Heat transfer enhancement in heat exchanger with dimpled / protruded surface', in International Heat Transfer Conference 15, Kyoto, Japan, presented at
, 2014, 'Thermal Performance of Nanofluids in Microchannel Equipped with a Synthetic Jet Actuator', in Proceeding: International Heat Transfer Conference 15, Kyoto, Japan, presented at
, 2014, 'Three-dimensional computational study of natural convection in a non-uniformly heated vertical open-ended channel', in Kasagi N (ed.), Proceedings of the 15th International Heat Transfer Conference, IHTC-15, Kyoto, Japan, presented at
, 2014, 'Numerical Analysis of Magnetised Stent Implant for Capturing of Drug Carrier Particles in Deep Tissue Cancer Treatment', presented at
, 2014, 'Holographic microscopy of micron-sized droplets at liquid-liquid interfaces', in Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014
, 2014, 'The importance of detail reaction mechanisms for temperature field predictions of compartment firs', in Proceedings of the 15th International Heat Transfer Conference, IHTC 2014
Filter by type
https://orcid.org/0000-0003-3483-3759