ORCID as entered in ROS
https://orcid.org/0000-0003-3483-3759
Select Publications
Conference Papers
, 2024, 'Enhancing Thermal Stability of Carbon Fiber/Phenolic Matrix Composites Using ZrO2 Nanoparticles', in 11th Australasian Congress on Applied Mechanics, ACAM 2024, pp. 393 - 399
, 2022, 'Atomistic Insights into Fire Retarded Polymers Composites: Reactive Molecular Dynamics Study', Brisbane, Australia, presented at
, 2021, 'Creating a systematic experimental/numerical integrated framework for building polymers flammability and toxicity analysis', in Proceedings of the 12th Asia-Oceania Symposium on Fire Science and Technology (AOSFST 2021), The University of Queensland, presented at
, 2021, 'Fire hazard assessment of four commonly used polymers using TGA and CC-FTIR experimentation', in Proceedings of the 12th Asia-Oceania Symposium on Fire Science and Technology (AOSFST 2021), The University of Queensland, presented at
, 2021, 'Numerical study of enclosure heat and gas species migration from cladding fires incorporating Artificial Neural Network', in Proceedings of the 12th Asia-Oceania Symposium on Fire Science and Technology (AOSFST 2021), The University of Queensland, presented at
, 2021, 'Reactive Molecular Dynamics Study of Hyperthermal Oxidation and Thermal Decomposition of Graphite', South Africa, presented at
, 2020, 'Electrical Field Modeling and Tracking Performance of RTV Silicone Rubber Composite Insulation', in 2020 IEEE 3rd International Conference on Dielectrics (ICD), IEEE, Valencia, Spain, Spain, pp. 533 - 536, presented at
, 2020, 'Numerical Study of Surface Regression of a Flame Retarded Expandable Polystrene', pp. 149 - 158, http://dx.doi.org/10.1007/978-981-13-7603-0_16
, 2020, 'Three-Dimensional Numerical Simulation of Air-Flow in Inkjet Print-Zones', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at
, 2019, 'Multiple injections of iso-octane and n-heptane: Part II', Adelaide, presented at
, 2019, 'Multiple injections of iso-octane and n-heptane: Part I', in Multiple injections of iso-octane and n-heptane: Part I, The university of Adelaide, presented at
, 2019, ''Slower is Faster' by Considering of Give-way Evacuation Behavior', in 2019 9th International Conference on Fire Science and Fire Protection Engineering, ICFSFPE 2019, http://dx.doi.org/10.1109/ICFSFPE48751.2019.9055846
, 2019, 'CFD-DEM analysis of realistically heated pebble bed geometry', in 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019, Portland, OR, pp. 1726 - 1739, presented at
, 2019, 'Predictive study of condensing vapour bubble in subcooled boiling flow using intersection marker method', in 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019, Portland, OR, pp. 112 - 126, presented at
, 2019, 'Spray and combustion characterization of gasoline-like fuel under compression ignition conditions: Part II', in 12th Asia-Pacific Conference on Combustion, ASPACC 2019, Fukuoka, Japan, presented at
, 2019, 'Investigation on Dry Band Arcing Induced Tracking Failure on Nanocomposites of EPDM Matrix', in ICEMPE 2019 - 2nd International Conference on Electrical Materials and Power Equipment, Proceedings, IEEE, Guangzhou, China,, pp. 309 - 312, presented at
, 2018, 'Heat transfer modelling of a supercapacitor stack', in International Heat Transfer Conference, Begell House, pp. 3911 - 3918, presented at
, 2018, 'Mixed Convection in Double-Skin Façade-Roof PV Systems: Numerical Study', RMIT University, Melbourne, Australia, presented at
, 2018, 'Effects of radiation on turbulent natural convection and heat transfer in building-integrated photovoltaic systems', RMIT University, Melbourne, Australia, presented at
, 2018, 'CFD study of subcooled boiling in a parallel plate assembly of a research reactor', in Transactions of the American Nuclear Society, American Nuclear Society, Philadelphia, PA, pp. 1042 - 1045, presented at
, 2018, 'CFD-DEM analysis of heated pebble bed geometry', in Transactions of the American Nuclear Society, American Nuclear Society, Philadelphia, PA, pp. 1245 - 1247, presented at
, 2018, 'Analysis of the growth of spherical air bubbles in water due to the interfacial mass transfer by a 3D front-tracking method', in International Heat Transfer Conference, pp. 6153 - 6161, http://dx.doi.org/10.1615/ihtc16.mpf.021240
, 2018, 'Bubble Growth due to Convective Heat Transfer in Micro-gravity Environment', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Bubble Growth due to Convective Heat Transfer in Micro-gravity Environment', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'CFD study of subcooled boiling in a parallel plate assembly of a research reactor', in AISTech - Iron and Steel Technology Conference Proceedings, pp. 1042 - 1045
, 2018, 'CFD-DEM analysis of heated pebble bed geometry', in AISTech - Iron and Steel Technology Conference Proceedings, pp. 1245 - 1247
, 2018, 'Experimental and simulation investigation of propane as a refrigerent for heat pump water heaters', in International Heat Transfer Conference, pp. 7549 - 7557, http://dx.doi.org/10.1615/ihtc16.nee.022158
, 2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2018, 'Simulation of droplet impact and spreading using a simple dynamic contact angle model', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018
, 2017, 'Combustion measurements of waste cooking oil biodiesel', in Proceedings of the 11th Asia-Pacific Conference on Combustion, The University of Sydney, pp. Paper 208 - Paper 208, presented at
, 2017, 'Experimental study of main-post injection under compression-ignition engine conditions, Part I: Effects of dwell time', in Proceedings of 11th Asia-Pacific Conference on Combustion, The University of Sydney, pp. Paper 209 - Paper 209, presented at
, 2017, 'Experimental study of main-post injection under compression-ignition engine conditions, Part II: Two-color pyrometry', in Proceedings of 11th Asia-Pacific Conference on Combustion, Combustion Institute China Section, The University of Sydney, pp. 775 - 778, presented at
, 2017, 'Multifunctional rubber based composites for marine applications: A review', UNDW， Sydney, presented at
, 2017, 'Numerical simulation of the driving mechanisms of fire whirls using large eddy simulation', UC San Diego, US, presented at
, 2017, 'Heat generation in gold nanorods solutions due to absorption of near-infrared radiation', in Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer May 28-June 1, 2017, Napoli, Italy, pp. 367 - 377, presented at
, 2017, 'Coupled CFD-DEM analysis of bouyant pebble bed experiment', in 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017
, 2017, 'Coupled CFD-DEM analysis of molten salt-cooled pebble-bed reactor experiment', in Transactions of the American Nuclear Society, pp. 1506 - 1509
, 2017, 'Simulating bubble deformations using the intersection marker (ISM) front-tracking method', in Transactions of the American Nuclear Society, pp. 1265 - 1268
, 2016, 'On recent developments of chemical kinetics and fire field model for typical furniture materials', in 2016 International Symposium on Safety Science and Technology, Kunming, Yunnan Province, China, presented at
, 2016, 'Numerical Simulation of Condensation Effect on a Steam Ejector by Wet Steam Model', Sendai, Japan, presented at
, 2016, 'Numerical modelling of magnetic nanoparticle and carrier fluid interactions', in Nanotechnology Materials and Devices Conference, NMDC 2016 - Conference Proceedings, Institute of Electrical and Electronics Engineers (IEEE), Toulouse, France, pp. 1 - 3, presented at
, 2016, 'Is comparison with experimental data a reasonable method of validating computational models?', in Journal of Physics: Conference Series, Krakow, Poland, presented at
, 2016, 'Numerical Study on Small-Scale Fire Whirl using Large Eddy Simulation', in Proceedings of the 3 rd International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT’16), Avestia Publishing, Ottawa, Canada, presented at
, 2016, 'Recent advancement of soot prediction in fire field model with the incorporation of detailed combustion products for compartment fires', in 8th International Seminar on Fire and Explosion Hazards, Hefei, China, presented at
, 2016, 'OPAL reactor calculations using reactor physics code Serpent', in Physics of Reactors 2016, PHYSOR 2016: Unifying Theory and Experiments in the 21st Century, pp. 2950 - 2960
, 2016, 'Tracking of bubbles using InterSection Marker (ISM) method', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2016, 'Tracking of bubbles using InterSection Marker (ISM) method', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
, 2015, 'A numerical study of multiple smoke vents for large halls', in 7th International Conference on Fire Science and Fire Protection Engineering, Guangzhou, China, presented at
, 2015, 'Numerical modelling of pyrolysis, ignition and combustion of burning of flame-retardant polystyrene', in 1st Asia-Oceania Symposium on Fire Safety Materials Science and Engineering, Suzhou, China, presented at
, 2015, 'An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet', in ISAAT (ed.), Trans Tech Publications, Jeju Island, Korea, pp. 113 - 118, presented at
Filter by type
https://orcid.org/0000-0003-3483-3759