By Professor Jang-Kyo Kim

Journal articles

Kim JK; Yu TX, 1997, 'Forming and failure behaviour of coated, laminated and sandwiched sheet metals: A review', Journal of Materials Processing Technology, 63, pp. 33 - 42, http://dx.doi.org/10.1016/S0924-0136(96)02596-4

Wong RCP; Hoult AP; Kim JK; Yu TX, 1997, 'Improvement of adhesive bonding in aluminium alloys using a laser surface texturing process', Journal of Materials Processing Technology, 63, pp. 579 - 584, http://dx.doi.org/10.1016/S0924-0136(96)02687-8

Kim JK, 1997, 'Stress transfer in the fibre fragmentation test. Part III Effects of interface debonding and matrix yielding', Journal of Materials Science, 32, pp. 701 - 711, http://dx.doi.org/10.1023/A:1018596004325

Sham M-L; Kim J-K; Wu J, 1997, 'Effects of Coupling Agent Concentration and Hygrothermal Ageing on the Fracture Behaviour of Glass Woven Fabric-Reinforced Vinyl Ester Laminates', Polymers and Polymer Composites, 5, pp. 165 - 175, http://dx.doi.org/10.1177/147823919700500302

Hirai Y; Hamada H; Kim JK, 1996, 'Damage modes in impact loading of glass woven fabric composites', Advanced Composites Letters, 5, pp. 59 - 63, http://dx.doi.org/10.1177/096369359600500205

Kim JK; Leung LM; Lee SWR; Hirai Y, 1996, 'Impact performance of a woven fabric CFRP laminate', Polymers and Polymer Composites, 4, pp. 549 - 561, http://dx.doi.org/10.111/J.0967-3911

Kim JK; Mai YW, 1995, 'Stress transfer in the fibre fragmentation test - Part II Multiple fibre composites', Journal of Materials Science, 30, pp. 3024 - 3032, http://dx.doi.org/10.1007/BF01209212

Zhou L; Kim JK; Baillie C; Mai YW, 1995, 'Fracture Mechanics Analysis of the Fibre Fragmentation Test', Journal of Composite Materials, 29, pp. 881 - 902, http://dx.doi.org/10.1177/002199839502900703

Zhou LM; Mai YW; Ye L; Kim JK, 1995, 'Techniques for evaluating interfacial properties of fibre-matrix composites', Key Engineering Materials, 104-107, pp. 549 - 600

Kim J-K; Park JH, 1995, 'Iosipescu Shear Test of Composite Joint Specimens in Tensile Loading', Advanced Composites Letters, 4, pp. 096369359500400 - 096369359500400, http://dx.doi.org/10.1177/096369359500400402

Kim JK; Zhou L; Bryan SJ; Mai YW, 1994, 'Effects of fibre volume fraction on the stress transfer in fibre pull-out tests', Composites, 25, pp. 470 - 475, http://dx.doi.org/10.1016/0010-4361(94)90171-6

Kim JK; Lu S; Mai YW, 1994, 'Interfacial debonding and fibre pull-out stresses - Part IV Influence of interface layer on the stress transfer', Journal of Materials Science, 29, pp. 554 - 561, http://dx.doi.org/10.1007/BF01162521

Kim JK; MacKay DB; Mai YW, 1993, 'Drop-weight impact damage tolerance of CFRP with rubber-modified epoxy matrix', Composites, 24, pp. 485 - 494, http://dx.doi.org/10.1016/0010-4361(93)90018-4

Kim JK; Mai YW, 1993, 'Fracture of CFRP containing impregnated fibre bundles', Composites Science and Technology, 49, pp. 51 - 60, http://dx.doi.org/10.1016/0266-3538(93)90021-8

Koh SW; Kim JK; Mai YW, 1993, 'Fracture toughness and failure mechanisms in silica-filled epoxy resin composites: effects of temperature and loading rate', Polymer, 34, pp. 3446 - 3455, http://dx.doi.org/10.1016/0032-3861(93)90474-O

Kim JK; Zhou LM; Mai YW, 1993, 'Interfacial debonding and fibre pull-out stresses - Part III Interfacial properties of cement matrix composites', Journal of Materials Science, 28, pp. 3923 - 3930, http://dx.doi.org/10.1007/BF00353200

Zhou LM; Kim JK; Mai YW, 1993, 'Micromechanical characterisation of fibre/matrix interfaces', Composites Science and Technology, 48, pp. 227 - 236, http://dx.doi.org/10.1016/0266-3538(93)90140-C

Kim JK; Zhou L; Mai YW, 1993, 'Stress transfer in the fibre fragmentation test - Part I An improved analysis based on a shear strength criterion', Journal of Materials Science, 28, pp. 6233 - 6245, http://dx.doi.org/10.1007/BF00365049

Kim JK; Mai YW; Kennedy BJ, 1992, 'Surface analysis of carbon fibres modified with PVAL coating and the composite interfaces', Journal of Materials Science, 27, pp. 6811 - 6816, http://dx.doi.org/10.1007/BF01165973

Kim JK; Baillie C; Mai YW, 1992, 'Interfacial debonding and fibre pull-out stresses - Part I Critical comparison of existing theories with experiments', Journal of Materials Science, 27, pp. 3143 - 3154, http://dx.doi.org/10.1007/BF01116004

Zhou LM; Kim JK; Mai YW, 1992, 'Interfacial debonding and fibre pull-out stresses - Part II A new model based on the fracture mechanics approach', Journal of Materials Science, 27, pp. 3155 - 3166, http://dx.doi.org/10.1007/BF01116005

Kim J; Baillie C; Poh J; Mai YW, 1992, 'Fracture toughness of CFRP with modified epoxy resin matrices', Composites Science and Technology, 43, pp. 283 - 297, http://dx.doi.org/10.1016/0266-3538(92)90099-O

Zhou LM; Kim JK; Mai YW, 1992, 'On the single fibre pull-out problem: effect of loading method', Composites Science and Technology, 45, pp. 153 - 160, http://dx.doi.org/10.1016/0266-3538(92)90037-4

Kim J; Mai YW, 1991, 'Effects of interfacial coating and temperature on the fracture behaviours of unidirectional Kevlar and carbon fibre reinforced epoxy resin composites', Journal of Materials Science, 26, pp. 4702 - 4720, http://dx.doi.org/10.1007/BF00612409

Kim JK; Mai YW, 1991, 'High strength, high fracture toughness fibre composites with interface control-A review', Composites Science and Technology, 41, pp. 333 - 378, http://dx.doi.org/10.1016/0266-3538(91)90072-W

Kim JK; Baillie C; Mai YW, 1991, 'Instability of interfacial debonding during fibre pull-out', Scripta Metallurgica et Materiala, 25, pp. 315 - 320, http://dx.doi.org/10.1016/0956-716X(91)90185-4

Kim JK; Thomson PF, 1990, 'Forming behaviour of sheet steel laminate', Journal of Materials Processing Tech., 22, pp. 45 - 64, http://dx.doi.org/10.1016/0924-0136(90)90141-G

Kim JK; Thomson PF, 1990, 'Friction and stress distribution in coated steel sheet during forming', Journal of Materials Processing Tech., 21, pp. 29 - 42, http://dx.doi.org/10.1016/0924-0136(90)90027-R

Kim JK; Thomson PF, 1990, 'Separation behaviour of sheet steel laminate during forming', Journal of Materials Processing Tech., 22, pp. 147 - 161, http://dx.doi.org/10.1016/0924-0136(90)90037-U

Kim JK; Thomson PF, 1989, 'Springback and side-wall curl of galvanized and galvalume steel sheet', Journal of Mechanical Working Technology, 19, pp. 223 - 238, http://dx.doi.org/10.1016/0378-3804(89)90006-5

Back to profile page