By Professor Sophie Primig

Journal articles

Maric M; Muránsky O; Karatchevtseva I; Ungár T; Hester J; Studer A; Scales N; Ribárik G; Primig S; Hill MR; Muransky O, 2018, 'The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt', Corrosion Science, 142, pp. 133 - 144, http://dx.doi.org/10.1016/j.corsci.2018.07.006

Drexler A; Oberwinkler B; Primig S; Turk C; Povoden-Karadeniz E; Heinemann A; Ecker W; Stockinger M, 2018, 'Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718', Materials Science and Engineering: A, 723, pp. 314 - 323, http://dx.doi.org/10.1016/j.msea.2018.03.013

Leitner K; Scheiber D; Jakob S; Primig S; Clemens H; Povoden-Karadeniz E; Romaner L, 2018, 'How grain boundary chemistry controls the fracture mode of molybdenum', Materials and Design, 142, pp. 36 - 43, http://dx.doi.org/10.1016/j.matdes.2018.01.012

Schulz B; Andersen HL; Al Bahri OK; Johannessen B; Liu J; Primig S; Sharma N, 2018, 'Electrochemical performance and structure of Al2W3-: XMoxO12', CrystEngComm, 20, pp. 1352 - 1360, http://dx.doi.org/10.1039/c7ce01707c

Leitner (née Babinsky) K; Felfer PJ; Holec D; Cairney J; Knabl W; Lorich A; Clemens H; Primig S, 2017, 'On grain boundary segregation in molybdenum materials', Materials and Design, 135, pp. 204 - 212, http://dx.doi.org/10.1016/j.matdes.2017.09.019

Verdiere A; Hofer C; De Waele S; Bliznuk V; Primig S; Cottenier S; Tran MD; Pennings B; Kestens LAI; Petrov RH, 2017, 'Precipitation in simultaneously nitrided and aged Mo-containing maraging steel', Materials Characterization, 131, pp. 21 - 30, http://dx.doi.org/10.1016/j.matchar.2017.06.014

Turk C; Leitner H; Schemmel I; Clemens H; Primig S, 2017, 'Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy', Micron, 98, pp. 24 - 33, http://dx.doi.org/10.1016/j.micron.2017.03.007

Ragger KS; Primig S; Daniel R; Kaiser R; Paal J; Mitterer C; Buchmayr B, 2017, 'Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains', Materials Characterization, 128, pp. 257 - 268, http://dx.doi.org/10.1016/j.matchar.2017.03.026

Ahmadi MR; Rath M; Povoden-Karadeniz E; Primig S; Wojcik T; Danninger A; Stockinger M; Kozeschnik E, 2017, 'Modeling of precipitation strengthening in Inconel 718 including non-spherical γ" precipitates', Modelling and Simulation in Materials Science and Engineering, 25, pp. 055005, http://dx.doi.org/10.1088/1361-651X/aa6f54

Breen AJ; Babinsky K; Day AC; Eder K; Oakman CJ; Trimby PW; Primig S; Cairney JM; Ringer SP, 2017, 'Correlating Atom Probe Crystallographic Measurements with Transmission Kikuchi Diffraction Data', Microscopy and Microanalysis, 23, pp. 279 - 290, http://dx.doi.org/10.1017/S1431927616012605

Hofer C; Primig S; Clemens H; Winkelhofer F; Schnitzer R, 2017, 'Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel', Advanced Engineering Materials, 19, http://dx.doi.org/10.1002/adem.201600658

Stechauner G; Primig S; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited – Part II: Thermokinetic Simulation', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201600085

Primig S; Stechauner G; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15–5 PH Maraging Steel Revisited − Part I: Experimental Analysis', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201600084

Lang D; Povoden-Karadeniz E; Schatte J; Knabl W; Clemens H; Primig S, 2017, 'Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities', Journal of Alloys and Compounds, 695, pp. 372 - 381, http://dx.doi.org/10.1016/j.jallcom.2016.10.227

Babinsky K; Primig S; Knabl W; Lorich A; Stickler R; Clemens H, 2016, 'Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests', JOM, 68, pp. 2854 - 2863, http://dx.doi.org/10.1007/s11837-016-2075-y

Sackl S; Leitner H; Clemens H; Primig S, 2016, 'On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2', Materials Characterization, 120, pp. 323 - 330, http://dx.doi.org/10.1016/j.matchar.2016.09.021

Sackl S; Zuber M; Clemens H; Primig S, 2016, 'Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47, pp. 3694 - 3702, http://dx.doi.org/10.1007/s11661-016-3534-3

Hofer C; Winkelhofer F; Clemens H; Primig S, 2016, 'Morphology change of retained austenite during austempering of carbide-free bainitic steel', Materials Science and Engineering: A, 664, pp. 236 - 246, http://dx.doi.org/10.1016/j.msea.2016.04.005

Turk C; Leitner H; Kellezi G; Clemens H; Gan WM; Staron P; Primig S, 2016, 'Impact of the B2 ordering behavior on the mechanical properties of a FeCoMo alloy', Materials Science and Engineering: A, 662, pp. 511 - 518, http://dx.doi.org/10.1016/j.msea.2016.03.083

Hofer C; Bliznuk V; Verdiere A; Petrov R; Winkelhofer F; Clemens H; Primig S, 2016, 'Correlative microscopy of a carbide-free bainitic steel', Micron, 81, pp. 1 - 7, http://dx.doi.org/10.1016/j.micron.2015.10.008

Lang D; Pöhl C; Holec D; Schatte J; Povoden-Karadeniz E; Knabl W; Clemens H; Primig S, 2016, 'On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy', Journal of Alloys and Compounds, 654, pp. 445 - 454, http://dx.doi.org/10.1016/j.jallcom.2015.09.126

Lang D; Karge L; Schatte J; Gilles R; Dallinger R; Weißensteiner I; Staron P; Knabl W; Primig S; Clemens H, 2016, 'Evolution of strain-induced hafnium carbides in a molybdenum base Mo–Hf–C alloy studied by small-angle neutron scattering and complementary methods', Journal of Alloys and Compounds, 688, pp. 619 - 631, http://dx.doi.org/10.1016/j.jallcom.2016.06.282

Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2015, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy, 159, pp. 445 - 451, http://dx.doi.org/10.1016/j.ultramic.2015.05.014

Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy', International Journal of Powder Metallurgy, 51, pp. 21 - 25

Hofer C; Leitner H; Winkelhofer F; Clemens H; Primig S, 2015, 'Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel', Materials Characterization, 102, pp. 85 - 91, http://dx.doi.org/10.1016/j.matchar.2015.02.020

Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum base MO-HF-C alloy', Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015

Turk C; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD', Praktische Metallographie/Practical Metallography, 52, pp. 323 - 333, http://dx.doi.org/10.3139/147.110344

Sackl S; Clemens H; Primig S, 2015, 'Investigation of the self tempering effect of martensite by means of atom probe tomography', Praktische Metallographie/Practical Metallography, 52, pp. 374 - 383, http://dx.doi.org/10.3139/147.110343

Primig S; Clemens H; Knabl W; Lorich A; Stickler R, 2015, 'Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum', International Journal of Refractory Metals and Hard Materials, 48, pp. 179 - 186, http://dx.doi.org/10.1016/j.ijrmhm.2014.09.008

Hofer C; Clemens H; Primig S, 2015, 'Preparation of carbide-free bainitic steels for EBSD investigations', Praktische Metallographie/Practical Metallography, 52, pp. 384 - 395

Mayer S; Hawranek G; Mendez-Martin F; Panzenböck M; Pölzl S; Primig S; Rashkova B; Clemens H, 2015, 'The role of metallography in the development and characterization of high-performance materials', Praktische Metallographie/Practical Metallography, 52, pp. 59 - 74, http://dx.doi.org/10.3139/147.110329

Primig S, 2015, 'Advanced Structure-Property Relationships: Made in Styria!', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 203 - 203, http://dx.doi.org/10.1007/s00501-015-0360-7

Haslberger P; Turk C; Babinsky K; Caliskanoglu D; Clemens H; Primig S, 2015, 'Boron Grain Boundary Segregation in a Heat Treatable Steel', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 204 - 208, http://dx.doi.org/10.1007/s00501-015-0358-1

Lang D; Schatte J; Knabl W; Clemens H; Primig S, 2015, 'Texture Evolution during Deformation of a Mo-Hf-C Alloy Studied with Electron Backscatter Diffraction', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 226 - 230, http://dx.doi.org/10.1007/s00501-015-0353-6

Lang D; Pöhl C; Schatte J; Primig S; Leitner H, 2014, 'On the precipitation mechanism in the molybdenum based alloy MHC (Mo-Hf-C)', Powder Metallurgy, 57, pp. 311 - 313, http://dx.doi.org/10.1179/0032589914Z.000000000214

Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 5657 - 5666, http://dx.doi.org/10.1007/s11661-014-2518-4

Hollerweger R; Riedl H; Paulitsch J; Arndt M; Rachbauer R; Polcik P; Primig S; Mayrhofer PH, 2014, 'Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings', Surface and Coatings Technology, 257, pp. 78 - 86, http://dx.doi.org/10.1016/j.surfcoat.2014.02.067

Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2014, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy, http://dx.doi.org/10.1016/j.ultramic.2015.05.014

Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A, http://dx.doi.org/10.1007/s11661-014-2518-4

Ressel G; Parz P; Primig S; Leitner H; Clemens H; Puff W, 2014, 'New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy', Journal of Applied Physics, 115, http://dx.doi.org/10.1063/1.4869787

Babinsky K; De Kloe R; Clemens H; Primig S, 2014, 'A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction', Ultramicroscopy, 144, pp. 9 - 18, http://dx.doi.org/10.1016/j.ultramic.2014.04.003

Babinsky K; Weidow J; Knabl W; Lorich A; Leitner H; Primig S, 2014, 'Atom probe study of grain boundary segregation in technically pure molybdenum', Materials Characterization, 87, pp. 95 - 103, http://dx.doi.org/10.1016/j.matchar.2013.11.001

Nöhrer M; Mayer W; Primig S; Zamberger S; Kozeschnik E; Leitner H, 2014, 'Influence of deformation on the precipitation behavior of Nb(CN) in austenite and ferrite', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 4210 - 4219, http://dx.doi.org/10.1007/s11661-014-2373-3

Ressel G; Primig S; Leitner H, 2014, 'The effect of zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 1552 - 1558, http://dx.doi.org/10.1007/s11661-013-2052-9

Primig S; Leitner H; Kozeschnik E, 2014, 'Early Stages of Precipitation: Experiments and Modelling', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 5 - 11, http://dx.doi.org/10.1007/s00501-013-0226-9

Zacharias H; Arndt J; Primig S, 2014, 'Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7−6', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 296 - 297, http://dx.doi.org/10.1007/s00501-014-0272-y

Nöhrer M; Zamberger S; Primig S; Leitner H, 2013, 'Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite', Micron, 54-55, pp. 57 - 64, http://dx.doi.org/10.1016/j.micron.2013.08.008

Ressel G; Primig S; Leitner H, 2013, 'The evolution of y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography', International Journal of Materials Research, 104, pp. 1088 - 1095, http://dx.doi.org/10.3139/146.110964

Primig S; Leitner H; Knabl W; Lorich A; Stickler R, 2012, 'Static recrystallization of molybdenum after deformation below 0.5*TM (K)', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4806 - 4818, http://dx.doi.org/10.1007/s11661-012-1292-4

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Textural evolution during dynamic recovery and static recrystallization of molybdenum', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4794 - 4805, http://dx.doi.org/10.1007/s11661-012-1291-5

Back to profile page