By Professor Sophie Primig

Journal articles

Ressel G; Primig S; Leitner H, 2014, 'The effect of zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 1552 - 1558, http://dx.doi.org/10.1007/s11661-013-2052-9

Primig S; Leitner H; Kozeschnik E, 2014, 'Early Stages of Precipitation: Experiments and Modelling', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 5 - 11, http://dx.doi.org/10.1007/s00501-013-0226-9

Zacharias H; Arndt J; Primig S, 2014, 'Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7−6', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 296 - 297, http://dx.doi.org/10.1007/s00501-014-0272-y

Nöhrer M; Zamberger S; Primig S; Leitner H, 2013, 'Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite', Micron, 54-55, pp. 57 - 64, http://dx.doi.org/10.1016/j.micron.2013.08.008

Ressel G; Primig S; Leitner H, 2013, 'The evolution of y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography', International Journal of Materials Research, 104, pp. 1088 - 1095, http://dx.doi.org/10.3139/146.110964

Primig S; Leitner H; Knabl W; Lorich A; Stickler R, 2012, 'Static recrystallization of molybdenum after deformation below 0.5*TM (K)', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4806 - 4818, http://dx.doi.org/10.1007/s11661-012-1292-4

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Textural evolution during dynamic recovery and static recrystallization of molybdenum', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4794 - 4805, http://dx.doi.org/10.1007/s11661-012-1291-5

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Influence of the heating rate on the recrystallization behavior of molybdenum', Materials Science and Engineering: A, 535, pp. 316 - 324, http://dx.doi.org/10.1016/j.msea.2011.12.099

Primig S; Leitner H, 2011, 'Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis', Thermochimica Acta, 526, pp. 111 - 117, http://dx.doi.org/10.1016/j.tca.2011.09.001

Primig S; Leitner H; Lorich A; Knabl W; Clemens H; Stickler R, 2011, 'SEM and TEM investigations of recovery and recrystallization in technically pure molybdenum', Praktische Metallographie/Practical Metallography, 48, pp. 344 - 355, http://dx.doi.org/10.3139/147.110136

Primig S; Leitner H; Clemens H; Lorich A; Knabl W; Stickler R, 2010, 'On the recrystallization behavior of technically pure molybdenum', International Journal of Refractory Metals and Hard Materials, 28, pp. 703 - 708, http://dx.doi.org/10.1016/j.ijrmhm.2010.03.006

Primig S; Leitner H, 2010, 'Transformation from continuous-to-isothermal aging applied on a maraging steel', Materials Science and Engineering: A, 527, pp. 4399 - 4405, http://dx.doi.org/10.1016/j.msea.2010.03.084

Primig S; Leitner H; Clemens H; Stickler R; Lorich A; Knabl W; Köck W, 2010, 'Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän', BHM Berg- und Hüttenmännische Monatshefte, 155, pp. 20 - 25, http://dx.doi.org/10.1007/s00501-009-0530-6

Back to profile page