By Professor Yansong Shen

Journal articles

Chandratilleke GR; Dong KJ; Shen YS, 2018, 'DEM study of the effect of blade-support spokes on mixing performance in a ribbon mixer', Powder Technology, 326, pp. 123 - 136, http://dx.doi.org/10.1016/j.powtec.2017.12.055

Wu YL; Jiang ZY; Zhang XX; Xue QG; Miao Z; Zhou Z; Shen YS, 2018, 'Process optimization of metallurgical dust recycling by direct reduction in rotary hearth furnace', Powder Technology, 326, pp. 101 - 113, http://dx.doi.org/10.1016/j.powtec.2017.12.063

Zhou H; Wu S; Kou M; Luo ZG; Zou ZS; Shen Y, 2018, 'Analysis of cohesive particle percolation in a packed bed using discrete element method', ISIJ International, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Zhou H; Wu S; Kou M; Lu Z-G; Zou Z-S; Shen Y, 2018, 'Analysis of Cohesive Particle Percolation in a Packed Bed Using Discrete Element Method', ISIJ INTERNATIONAL, 58, pp. 43 - 51, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-373

Zhou H; Wu S; Kou M; Luo Z; He W; Zou Z; Shen Y, 2018, 'Discrete particle simulation of solid flow in a large-scale reduction shaft furnace with center gas supply device', ISIJ International, 58, pp. 422 - 430, http://dx.doi.org/10.2355/isijinternational.ISIJINT-2017-545

Zhao S; Shen Y; Zhou P; Zhang J; Zhang W; Chen X; Wei D; Fang P; Shen Y, 2018, 'Highly selective NO2 sensor based on p-type nanocrystalline NiO thin films prepared by sol–gel dip coating', Ceramics International, 44, pp. 753 - 759, http://dx.doi.org/10.1016/j.ceramint.2017.09.243

Gao Q; Shen Y; Wei G; Shen F, 2018, 'Reduction kinetics behavior of FeO-CaO-SiO2-MgO-Al2O3 molten slag using solid-carbon', Archives of Metallurgy and Materials, 63, pp. 257 - 263, http://dx.doi.org/10.24425/118936

Meng F; Gupta S; Yu J; Jiang Y; Koshy P; Sorrell C; Shen Y, 2017, 'Effects of kaolinite addition on the thermoplastic behaviour of coking coal during low temperature pyrolysis', Fuel Processing Technology, 167, pp. 502 - 510, http://dx.doi.org/10.1016/j.fuproc.2017.08.005

Gao QJ; Wei G; Shen YS; Jiang X; Zheng HY; Shen FM; Liu CS, 2017, 'Influence and mechanism of Indonesia vanadium titano-magnetite on metallurgical properties of iron ore sinter', Journal of Central South University, 24, pp. 2805 - 2812, http://dx.doi.org/10.1007/s11771-017-3695-2

Zhou H; Wu S; Kou M; Tang B; Cheng H; Zhang Y; Shen Y, 2017, 'Solid Flow in a Shaft Furnace in Smelting Reduction Process under Circumferential Imbalance Conditions', Steel Research International, 88, http://dx.doi.org/10.1002/srin.201700212

Meng F; Gupta S; French D; Koshy P; Sorrell C; Shen Y, 2017, 'Characterization of microstructure and strength of coke particles and their dependence on coal properties', Powder Technology, 320, pp. 249 - 256, http://dx.doi.org/10.1016/j.powtec.2017.07.046

Liu Y; Zhang J; Xing X; Liu Z; Li X; Li N; Shen Y, 2017, 'Synthesis and non-isothermal carbothermic reduction of FeTiO3-Fe2O3 solid solution systems', Metallurgical and Materials Transactions B

Liu F; Huang J; Sun K; Yan C; Shen Y; Park J; Pu A; Zhou F; Liu X; Stride JA; Green MA; Hao X, 2017, 'Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact', NPG Asia Mater, 9, pp. e401, http://dx.doi.org/10.1038/am.2017.103

Wu YL; Jiang Z; Zhang X; Xue Q; Yu A; Shen Y, 2017, 'Modelling of Thermochemical Behaviour in An Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling', Metallurgical and Materials Transactions B

Miao Z; Zhou Z; Yu AB; Shen Y, 2017, 'CFD-DEM simulation of raceway formation in an ironmaking blast furnace', Powder Technology, 314, pp. 542 - 549, http://dx.doi.org/10.1016/j.powtec.2016.11.039

Xu J; Yu S; Wang N; Chen M; Shen Y, 2017, 'Characterization of high-turbulence zone in slowly moving bed slagging coal gasifier by a 3D mathematical model', Powder Technology, 314, pp. 524 - 531, http://dx.doi.org/10.1016/j.powtec.2016.10.022

Luo ZG; Zhou H; Zhang T; You Y; Zhang LJ; Zou ZS; Shen YS, 2017, 'DEM study of blockage behaviour of cohesive fine particles in a packed structure of large particles', Powder Technology, 314, pp. 102 - 109, http://dx.doi.org/10.1016/j.powtec.2016.08.053

Liao J; Yu AB; Shen Y, 2017, 'Modelling the injection of upgraded brown coals in an ironmaking blast furnace', Powder Technology, 314, pp. 550 - 556, http://dx.doi.org/10.1016/j.powtec.2016.11.005

GAO QJ; SHEN YS; JIANG X; ZHENG HY; SHEN FM; LIU CS, 2016, 'Effect of MgO on Oxidation Process of Fe3O4 in Pellets', Journal of Iron and Steel Research International, 23, pp. 1007 - 1011, http://dx.doi.org/10.1016/S1006-706X(16)30151-0

Gao QJ; Shen YS; Wei G; Jiang X; Shen FM, 2016, 'Diffusion behavior and distribution regulation of MgO in MgO-bearing pellets', International Journal of Minerals, Metallurgy and Materials, 23, pp. 1011 - 1018, http://dx.doi.org/10.1007/s12613-016-1318-9

Shen YS; Yu AB, 2016, 'Modelling of injecting a ternary coal blend into a model ironmaking blast furnace', Minerals Engineering, 90, pp. 89 - 95, http://dx.doi.org/10.1016/j.mineng.2015.12.009

Shen Y; Guo B; Chew S; Austin P; Yu A, 2016, 'Modeling of Internal State and Performance of an Ironmaking Blast Furnace: Slot vs Sector Geometries', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 47, pp. 1052 - 1062, http://dx.doi.org/10.1007/s11663-015-0557-x

Zhou H; Luo ZG; Zhang T; You Y; Zou ZS; Shen Y, 2016, 'DEM study of solid flow in COREX shaft furnace with Areal Gas Distribution beams', ISIJ International, 56, pp. 245 - 254, http://dx.doi.org/10.2355/isijinternational.isijint-2015-540

Sun K; Liu F; Yan C; Zhou F; Huang J; Shen Y; Liu R; Hao X, 2016, 'Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates', Solar Energy Materials and Solar Cells, 157, pp. 565 - 571, http://dx.doi.org/10.1016/j.solmat.2016.07.036

Shen Y; Wang W; Fan A; Wei D; Liu W; Han C; Shen Y; Meng D; San X, 2015, 'Highly sensitive hydrogen sensors based on SnO2 nanomaterials with different morphologies', International Journal of Hydrogen Energy, 40, pp. 15773 - 15779, http://dx.doi.org/10.1016/j.ijhydene.2015.09.077

Sun Y; Zheng H; Dong Y; Jiang X; Shen Y; Shen F, 2015, 'Melting and separation behavior of slag and metal phases in metallized pellets obtained from the direct-reduction process of vanadium-bearing titanomagnetite', International Journal of Mineral Processing, 142, pp. 119 - 124, http://dx.doi.org/10.1016/j.minpro.2015.04.002

Shen Y; Yu A, 2015, 'Characterization of Coal Burnout in the Raceway of an Ironmaking Blast Furnace', Steel Research International, 86, pp. 604 - 611, http://dx.doi.org/10.1002/srin.201400333

Shen F; Gao Q; Wei G; Jiang X; Shen Y, 2015, 'Densification Process of MgO Bearing Pellets', Steel Research International, 86, pp. 644 - 650, http://dx.doi.org/10.1002/srin.201400372

Yu A; Shen Y, 2015, 'Iron and Steel Making in Australia and China - Special Issue for the 2nd Australia-China Joint Symposium of Minerals and Metallurgy', Steel Research International, 86, pp. 591, http://dx.doi.org/10.1002/srin.201500139

Shen Y; Guo B; Chew S; Austin P; Yu A, 2015, 'Three-Dimensional Modeling of Flow and Thermochemical Behavior in a Blast Furnace', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 46, pp. 432 - 448, http://dx.doi.org/10.1007/s11663-014-0204-y

Rangarajan D; Shiozawa T; Shen Y; Curtis JS; Yu A, 2014, 'Influence of operating parameters on raceway properties in a model blast furnace using a two-fluid model', Industrial and Engineering Chemistry Research, 53, pp. 4983 - 4990, http://dx.doi.org/10.1021/ie301936r

Sun K; Su Z; Yan C; Liu F; Cui H; Jiang L; Shen Y; Hao X; Liu Y, 2014, 'Flexible Cu2ZnSnS4 solar cells based on successive ionic layer adsorption and reaction method', RSC Advances, 4, pp. 17703 - 17708, http://dx.doi.org/10.1039/c3ra47823h

Shen Y; Shiozawa T; Austin P; Yu A, 2014, 'Model study of the effect of bird's nest on transport phenomena in the raceway of an ironmaking blast furnace', Minerals Engineering, 63, pp. 91 - 99, http://dx.doi.org/10.1016/j.mineng.2014.01.008

Shen Y; Guo B; Austin P; Chew S; Yu A, 2012, 'Modelling of ironmaking blast furnace: Comparison of slot and sector geometries', 6th Int. Congress on the Science and Technology of Ironmaking 2012, ICSTI 2012 - Including Proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symp. on Iron Ore, 1, pp. 1 - 12

Yu ABOYAOYA-B; Austin P; Zulli P; Shen Y, 2012, 'Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: Effect of coke bed porosities', Minerals Engineering, 33, pp. 54 - 65, http://dx.doi.org/10.1016/j.mineng.2011.10.014

Shen Y; Yu A; Zulli P, 2011, 'CFD modeling and applications of pulverized coal injection in blast furnace', AISTech - Iron and Steel Technology Conference Proceedings, pp. 495 - 505

Shen Y; Yu ABOYAOYA-B; Zulli P, 2011, 'CFD modelling and analysis of pulverized coal injection in blast furnace: An overview', Steel Research International, 82, pp. 532 - 542, http://dx.doi.org/10.1002/srin.201100045

Shen Y; Yu ABOYAOYA-B; Austin P; Zulli P, 2011, 'CFD study of in-furnace phenomena of pyulverized coal injection in blast furnace: effects of operating conditions', Powder Technology, 223, pp. 27 - 38, http://dx.doi.org/10.1016

Zatryb G; Podhorodecki A; Hao X; Misiewicz J; Shen Y; Green MA, 2011, 'Correlation between stress and carrier nonradiative recombination for silicon nanocrystals in an oxide matrix', Nanotechnology, 22, pp. 335703, http://dx.doi.org/10.1088/0957-4484/22/33/335703

Shen Y; Yu ABOYAOYA-B, 2011, 'Guest editorial letter for the special issues for Australia-China-Japan joint conference on Iron and Steel Making', Steel Research International, 82, pp. 465 - 465, http://dx.doi.org/10.1002/srin.201100043

Zatryb G; Podhorodecki A; Hao X; Shen Y; Green MA, 2010, 'Quantitative evaluation of boron-induced disorder in multilayers containing silicon nanocrystals in an oxide matrix designed for photovoltaic applications', Optics Express, 18, pp. 22004 - 22009, http://dx.doi.org/10.1364/OE.18.022004

Shen FM; Ding ZM; Yang WG; Jiang X; Mu L; Shen YS, 2009, 'An industrial investigation of Bi-PCI process in a blast furnace', 5th International Congress on the Science and Technology of Ironmaking, ICSTI 2009, pp. 753 - 757

Jiang X; Zhang L; Li GS; Jin MF; Wang Z; Shen YS; Shen FM, 2009, 'Influence of MgO addition on sinter strength of blast furnace', 5th International Congress on the Science and Technology of Ironmaking, ICSTI 2009, pp. 253 - 257

Shen Y; Guo B; Yu A; Zulli P, 2009, 'A three-dimensional numerical study of the combustion of coal blends in blast furnace', Fuel, the science and technology of fuel and energy, 88, pp. 255 - 263

Yu A; Shen Y; Guo B; Austin P; Maldonado D; Zulli P, 2009, 'Computational Fluid Dynamics Study of Pulverized Coal Combustion in Blast Furnace Raceway', Industrial and Engineering Chemistry Research, 48, pp. 10314 - 10323, http://dx.doi.org/10.1021/ie900853d

Hao X; Cho EC; Scardera G; Bellet-Amalric E; Bellet D; Shen Y; Huang S; Huang Y; Conibeer GJ; Green MA, 2009, 'Effects of phosphorus doping on structural and optical properties of silicon nanocrystals in a SiO2 matrix', Thin Solid Films, 517, pp. 5646 - 5652, http://dx.doi.org/10.1016/j.tsf.2009.02.076

Hao X; Podhorodecki AP; Shen Y; Zatryb G; Misiewicz G; Green MA, 2009, 'Effects of Si-rich oxide layer stoichiometry on the structural and optical properties of Si QD/SiO2 multilayer films', Nanotechnology, 20, pp. 485703 - 485713

Shen Y; Guo B; Yu AB; Zulli P, 2009, 'Model Study of the Effects of Coal Properties and Blast Conditions on Pulverized Coal Combustion', ISIJ International, 49, pp. 819 - 826, http://www.jstage.jst.go.jp/article/isijinternational/49/6/819/_pdf

Shen Y; Guo B; Yu AB; Peter A; Paul Z, 2009, 'Modelling in-Furnace Phenomena of Coal/Coke Combustion in a Blast Furnace: Effects of Coal Properties', Journal of Iron and Steel Research International, 16, pp. 1137 - 1142

Guo B; Paul Z; Daniel M; Yu AB; Shen Y, 2009, 'Modelling of Titanium Compound Formation in Blast Furnace Hearth', Journal of Iron and Steel Research International, 16, pp. 851 - 856

Back to profile page