By Scientia Professor Liangchi Zhang

Journal articles

Yang S; Zhang L; Wu Z, 2021, 'Characterization and criteria of phase transformations and lattice slipping in potassium dihydrogen phosphate crystals', Journal of the American Ceramic Society, 104, pp. 5955 - 5965, http://dx.doi.org/10.1111/jace.17955

Wu C; Zhang L; Qu P; Li S; Jiang Z; Li W, 2021, 'An Investigation into the Texture Transfer in the Process of Lubricated Skin Pass Rolling', Journal of Manufacturing Science and Engineering, Transactions of the ASME, 143, http://dx.doi.org/10.1115/1.4050466

Yang S; Zhang L; Wu Z, 2021, 'Effect of Anisotropy of Potassium Dihydrogen Phosphate Crystals on Its Deformation Mechanisms Subjected to Nanoindentation', ACS Applied Materials and Interfaces, 13, pp. 41351 - 41360, http://dx.doi.org/10.1021/acsami.1c12349

Yang S; Zhang L; Wu Z, 2021, 'An investigation on the nano-abrasion wear mechanisms of KDP crystals', Wear, 476, http://dx.doi.org/10.1016/j.wear.2021.203692

Wu Z; Zhang L; Liu W, 2021, 'Structural anisotropy effect on the nanoscratching of monocrystalline 6H-silicon carbide', Wear, 476, http://dx.doi.org/10.1016/j.wear.2021.203677

Wu C; Zhang L; Qu P; Li S; Jiang Z; Li W, 2021, 'Surface texture transfer in skin-pass rolling with the effect of roll surface wear', Wear, 476, http://dx.doi.org/10.1016/j.wear.2021.203764

Wang Y; Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Thermal oxidation and its effect on the wear of Mg alloy AZ31B', Wear, 476, http://dx.doi.org/10.1016/j.wear.2021.203673

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Multiscale Interface Stress Characterisation in Cold Rolling', Metals and Materials International, 27, pp. 1997 - 2013, http://dx.doi.org/10.1007/s12540-020-00918-z

Yang S; Zhang L, 2021, 'Characterization of mechanical properties and failure of potassium dihydrogen phosphate under mechanical stressing', Ceramics International, 47, pp. 15875 - 15882, http://dx.doi.org/10.1016/j.ceramint.2021.02.162

Li C; Zhang L; Ding J; Wu C; Sun L; Lin Q; Jiang Z, 2021, 'Kinematic modeling of surface topography ground by an electroplated diamond wheel', International Journal of Advanced Manufacturing Technology, 114, pp. 2753 - 2765, http://dx.doi.org/10.1007/s00170-021-06944-4

Zhang L; Wu C; Sedaghat H, 2021, 'Ultrasonic vibration–assisted incremental sheet metal forming', International Journal of Advanced Manufacturing Technology, 114, pp. 3311 - 3323, http://dx.doi.org/10.1007/s00170-021-07068-5

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2021, 'Effect of the elastic deformation of rolls on the surface texture transfer in skin-pass rolling', International Journal of Mechanical Sciences, 198, http://dx.doi.org/10.1016/j.ijmecsci.2021.106358

Tian Y; Feng H; Li J; Fang Q; Zhang L, 2021, 'Nanoscale sliding friction behavior on Cu/Ag bilayers influenced by water film', Applied Surface Science, 545, http://dx.doi.org/10.1016/j.apsusc.2021.148957

Li Z; Luo Z; Zhang LC; Wang CH, 2021, 'Topological design of pentamode lattice metamaterials using a ground structure method', Materials and Design, 202, http://dx.doi.org/10.1016/j.matdes.2021.109523

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Luo G; Sun L; Zhang L, 2021, 'Equivalent Circuit Model for a Large Array of Coupled Piezoelectric Micromachined Ultrasonic Transducers with High Emission Performance', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 68, pp. 718 - 733, http://dx.doi.org/10.1109/TUFFC.2020.3008179

Yang S; Zhang L; Xie H; Liu W, 2021, 'Interaction potential function for the deformation analysis of potassium dihydrogen phosphate using molecular dynamics simulation', Computational Materials Science, 187, http://dx.doi.org/10.1016/j.commatsci.2020.110122

Gain AK; Zhang L; Lim S, 2021, 'Tribological behavior of Ti–6Al–4V alloy: Subsurface structure, damage mechanism and mechanical properties', Wear, 464-465, http://dx.doi.org/10.1016/j.wear.2020.203551

Gao S; Gain AK; Zhang L, 2021, 'A metamaterial for wearable piezoelectric energy harvester', SMART MATERIALS AND STRUCTURES, 30, http://dx.doi.org/10.1088/1361-665X/abca09

Li W; Zhang L; Chen X; Wu C; Cui Z; Niu C, 2021, 'Predicting the evolution of sheet metal surface scratching by the technique of artificial intelligence', International Journal of Advanced Manufacturing Technology, 112, pp. 853 - 865, http://dx.doi.org/10.1007/s00170-020-06394-4

Rahaman ML; Zhang L, 2021, 'An investigation on the friction, wear and deformation of potassium dihydrogen phosphate', Wear, 476, pp. 203624 - 203624, http://dx.doi.org/10.1016/j.wear.2021.203624

Hou N; Zhang Y; Zhang L-C; Wang M-H, 2021, 'Material removal mechanisms and characteristics of potassium dihydrogen phosphate crystals under nanoscratching', Advances in Manufacturing, 9, pp. 558 - 567, http://dx.doi.org/10.1007/s40436-021-00356-z

Imran M; Zhang L; Gain AK, 2020, 'Advanced thermal metamaterial design for temperature control at the cloaked region', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-68481-6

Liu W; Zhang L; Luo N, 2020, 'Elastic modulus evolution of rocks under heating–cooling cycles', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-70920-3

Zhang Y; Hou N; Zhang LC; Wang Q, 2020, 'Elastic-plastic-brittle transitions of potassium dihydrogen phosphate crystals: characterization by nanoindentation', Advances in Manufacturing, 8, pp. 447 - 456, http://dx.doi.org/10.1007/s40436-020-00320-3

Wu Q; Zhang L, 2020, 'Microstructure-based three-dimensional characterization of chip formation and surface generation in the machining of particulate-reinforced metal matrix composites', International Journal of Extreme Manufacturing, 2, http://dx.doi.org/10.1088/2631-7990/abab4b

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Luo G; Sun L; Zhang L, 2020, 'Equivalent Circuit Models of Cell and Array for Resonant Cavity-Based Piezoelectric Micromachined Ultrasonic Transducer', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67, pp. 2103 - 2118, http://dx.doi.org/10.1109/TUFFC.2020.2993805

Gao S; Liu W; Zhang L; Gain AK, 2020, 'A new polymer-based mechanical metamaterial with tailorable large negative Poisson's ratios', Polymers, 12, pp. 1 - 15, http://dx.doi.org/10.3390/polym12071492

Vijayaraghavan V; Zhang L, 2020, 'Tensile Properties of Boron Nitride-Carbon Nanosheet-Reinforced Aluminum Nanocomposites Using Molecular Dynamics Simulation', JOM, 72, pp. 2305 - 2311, http://dx.doi.org/10.1007/s11837-020-04031-9

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Sun L; Luo G; Zhang L, 2020, 'Array Design of Piezoelectric Micromachined Ultrasonic Transducers with Low-Crosstalk and High-Emission Performance', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67, pp. 789 - 800, http://dx.doi.org/10.1109/TUFFC.2019.2956181

Zhang Y; Hou N; Zhang L, 2020, 'Effect of ultra-precision fly-cutting on the surface integrity of potassium dihydrogen phosphate crystals', Optical Materials Express, 10, pp. 971 - 980, http://dx.doi.org/10.1364/OME.390276

Gain AK; Zhang L, 2020, 'Mechanisms and optimization for the rapid fabrication method of polymeric microlens arrays', Applied Optics, 59, pp. 405 - 412, http://dx.doi.org/10.1364/AO.383365

Wu Z; Liu W; Zhang L; Lim S, 2020, 'Amorphization and dislocation evolution mechanisms of single crystalline 6H-SiC', Acta Materialia, 182, pp. 60 - 67, http://dx.doi.org/10.1016/j.actamat.2019.10.037

Li C; Zhang Y; Zhou G; Wei Z; Zhang L, 2020, 'Theoretical modelling of brittle-to-ductile transition load of KDP crystals on (001) plane during nanoindentation and nanoscratch tests', Journal of Materials Research and Technology, 9, pp. 14142 - 14157, http://dx.doi.org/10.1016/j.jmrt.2020.09.131

Li C; Zhang L; Sun L; Yang S; Wu C; Long X; Ding J; Jiang Z, 2019, 'A quantitative analysis of the indentation fracture of fused silica', Journal of the American Ceramic Society, 102, pp. 7264 - 7277, http://dx.doi.org/10.1111/jace.16645

Wu Q; Xu W; Zhang L, 2019, 'Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage', Journal of Materials Processing Technology, 274, http://dx.doi.org/10.1016/j.jmatprotec.2019.116315

Sedaghat H; Xu W; Zhang L; Liu W, 2019, 'On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals', International Journal of Automotive Technology, 20, pp. 31 - 37, http://dx.doi.org/10.1007/s12239-019-0125-5

Gain AK; Zhang L, 2019, 'Temperature and humidity effects on microstructure and mechanical properties of an environmentally friendly Sn–Ag–Cu material', Journal of Materials Science, 54, pp. 12863 - 12874, http://dx.doi.org/10.1007/s10853-019-03784-2

Zhang Y; Hou N; Zhang LC, 2019, 'Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultra-precision fly cutting', Advances in Manufacturing, 7, pp. 270 - 277, http://dx.doi.org/10.1007/s40436-019-00265-2

Wu Z; Liu W; Zhang L, 2019, 'Effect of structural anisotropy on the dislocation nucleation and evolution in 6H–SiC under nanoindentation', Ceramics International, 45, pp. 14229 - 14237, http://dx.doi.org/10.1016/j.ceramint.2019.04.131

Hou N; Zhang L; Zhang Y; Zhang F, 2019, 'On the Ultra-Precision Fabrication of Damage-Free Optical KDP Components: Mechanisms and Problems', Critical Reviews in Solid State and Materials Sciences, 44, pp. 283 - 297, http://dx.doi.org/10.1080/10408436.2018.1490247

Fang C; Yan Z; Deng W; Zhang L, 2019, 'Material removal in grinding sapphire wafers with brazed–diamond pellet plates', Materials and Manufacturing Processes, 34, pp. 791 - 799, http://dx.doi.org/10.1080/10426914.2019.1594260

Cui D; Zhang L; Mylvaganam K; Liu W, 2019, 'Molecular dynamics simulation of multi-groove nano-milling', Machining Science and Technology, 23, pp. 455 - 476, http://dx.doi.org/10.1080/10910344.2019.1575399

Xu W; Zhang L, 2019, 'Heat effect on the material removal in the machining of fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, 140, pp. 1 - 11, http://dx.doi.org/10.1016/j.ijmachtools.2019.01.005

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2019, 'A new method for predicting the three-dimensional surface texture transfer in the skin pass rolling of metal strips', Wear, 426-427, pp. 1246 - 1264, http://dx.doi.org/10.1016/j.wear.2018.12.020

Wu Q; Xu W; Zhang L, 2019, 'Microstructure-based modelling of fracture of particulate reinforced metal matrix composites', Composites Part B: Engineering, 163, pp. 384 - 392, http://dx.doi.org/10.1016/j.compositesb.2018.12.099

Liu WD; Liu M; Zhang LC, 2019, 'Thermally induced surface deterioration of glassy carbons', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/ab11ed

Gain AK; Zhang L, 2019, 'Nanosized samarium oxide (Sm2O3) particles suppressed the IMC phases and enhanced the shear strength of environmental-friendly Sn-Ag-Cu material', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/ab0cd4

Gain AK; Zhang L, 2019, 'Effects of Ni nanoparticles addition on the microstructure, electrical and mechanical properties of Sn-Ag-Cu alloy', Materialia, 5, http://dx.doi.org/10.1016/j.mtla.2019.100234

Vijayaraghavan V; Zhang L, 2019, 'Nanomechanics of single layer hybrid boron nitride–carbon nanosheets: A molecular dynamics study', Computational Materials Science, 159, pp. 376 - 384, http://dx.doi.org/10.1016/j.commatsci.2018.12.042

Sedaghat H; Xu W; Zhang L, 2019, 'Ultrasonic vibration-assisted metal forming: Constitutive modelling of acoustoplasticity and applications', Journal of Materials Processing Technology, 265, pp. 122 - 129, http://dx.doi.org/10.1016/j.jmatprotec.2018.10.012

Back to profile page