By Scientia Professor Liangchi Zhang

Journal articles

Zhao H; Zhou A; Zhang L; Arulrajah A, 2025, 'A novel three-dimensional DEM model for recycled aggregate concrete considering material heterogeneity and microcrack evolution', Composite Structures, 352, pp. 118677 - 118677, http://dx.doi.org/10.1016/j.compstruct.2024.118677

Zhao B; Wang Y; Peng J; Wang X; Ding W; Lei X; Wu B; Zhang M; Xu J; Zhang L; Das R, 2024, 'Overcoming challenges: advancements in cutting techniques for high strength-toughness alloys in aero-engines', International Journal of Extreme Manufacturing, 6, http://dx.doi.org/10.1088/2631-7990/ad8117

Gain AK; Zhang L, 2024, 'Rapid manufacture of defect-free microlens arrays by precision glass molding', Applied Optics, 63, pp. 5159 - 5159, http://dx.doi.org/10.1364/ao.526069

Li W; Zhang LC; Wu CH; Wang Y; Cui ZX; Niu C, 2024, 'A data-driven approach to RUL prediction of tools', Advances in Manufacturing, 12, pp. 6 - 18, http://dx.doi.org/10.1007/s40436-023-00464-y

Cui J; Wang Y; Zhang L; Li H, 2024, 'An intelligent design system for tailored metamaterial properties', International Journal of Mechanical Sciences, 282, pp. 109595 - 109595, http://dx.doi.org/10.1016/j.ijmecsci.2024.109595

Yang Z; Li Z; Zhang L, 2024, 'Effect of SiC particle content on the mechanical behavior and deformation mechanism of SiCp/Al composite under high-frequency dynamic loading', Materials Science and Engineering: A, 903, pp. 146643 - 146643, http://dx.doi.org/10.1016/j.msea.2024.146643

Li Z; Zhang L, 2024, 'In-situ TEM investigation of dislocation healing and recrystallization in nanoscratched silicon at elevated temperatures up to 800 °C', Journal of Materials Research and Technology, 31, pp. 1939 - 1944, http://dx.doi.org/10.1016/j.jmrt.2024.06.232

Cui Y; Gain AK; Zhang L; Li Z, 2024, 'Manufacture and property characterization of interconnected pore-gradient TPMS materials', Materials Science and Engineering: A, 892, pp. 146100 - 146100, http://dx.doi.org/10.1016/j.msea.2024.146100

Gain AK; Cui Y; Zhang L; Li Z, 2024, 'Mechanical properties of additively manufactured ultrafine grain stainless steel-titanium boride (SS–TiB2) nanocomposites', Materials Science and Engineering: A, 911, pp. 146961 - 146961, http://dx.doi.org/10.1016/j.msea.2024.146961

Li Z; Li Y; Zhang L, 2024, 'On the deformation mechanism and dislocations evolution in monocrystalline silicon under ramp nanoscratching', Tribology International, 193, pp. 109395 - 109395, http://dx.doi.org/10.1016/j.triboint.2024.109395

Gain AK; Cui Y; Zhang L, 2024, 'Pore-gradient Ti6Al4V alloy mimicking the properties of human cortical bones: The design of TPMS structures by selective laser melting', Materials Science and Engineering: A, 915, pp. 147220 - 147220, http://dx.doi.org/10.1016/j.msea.2024.147220

Wang Y; Zhang L; Liu A; Wu C, 2023, 'Tribological performance for an Mg alloy subjected to sliding at elevated temperatures: A comparison between Al2O3 and MoS2 nano additives in silicone oil-based lubricant', Tribology International, 188, http://dx.doi.org/10.1016/j.triboint.2023.108856

Yang S; Zhang L; Wu Z; Webster RF; Kong C; Chang SLY, 2023, 'TEM-MD characterization of KDP deformation mechanisms under nanoindentation', Journal of the European Ceramic Society, 43, pp. 3844 - 3848, http://dx.doi.org/10.1016/j.jeurceramsoc.2023.02.031

Wu Z; Zhang L; Yang S; Wu C; Xu K; Zheng D, 2023, 'Effects of temperature on the deformation of 6H–SiC during nanoscratching', Wear, 523, http://dx.doi.org/10.1016/j.wear.2023.204843

Zhao H; Zhang L; Wu Z; Liu A; Imran M, 2023, 'Aggregate effect on the mechanical and fracture behaviours of concrete', International Journal of Mechanical Sciences, 243, http://dx.doi.org/10.1016/j.ijmecsci.2022.108067

Wu C; Zhang L; Qu P; Li S; Jiang Z; Wang Y, 2023, 'A numerical strategy for predicting the interface stresses in metal strip rolling with small reduction', International Journal of Mechanical Sciences, 240, http://dx.doi.org/10.1016/j.ijmecsci.2022.107953

Cui J; Zhang L; Gain AK, 2023, 'A novel auxetic unit cell for 3D metamaterials of designated negative Poisson's ratio', International Journal of Mechanical Sciences, 260, pp. 108614 - 108614, http://dx.doi.org/10.1016/j.ijmecsci.2023.108614

Li C-S; Zhao N; Zhang L-C; Ding J-J; Sun L; Duan D-Z; Kang C-W; Jiang Z-D, 2023, 'An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding', Advances in Manufacturing, 11, pp. 363 - 377, http://dx.doi.org/10.1007/s40436-023-00444-2

Li Z; Zhang L; Gain AK, 2023, 'An investigation on the wear and subsurface deformation mechanism of CoCrFeMnNi high entropy alloy at subzero temperature', Wear, 524-525, pp. 204868 - 204868, http://dx.doi.org/10.1016/j.wear.2023.204868

Wu Z; Zhang L, 2023, 'Analytical grinding force prediction with random abrasive grains of grinding wheels', International Journal of Mechanical Sciences, 250, pp. 108310 - 108310, http://dx.doi.org/10.1016/j.ijmecsci.2023.108310

He Y; Zhang L; Cui J; Hu J, 2023, 'Blunting and wear of AFM tips during dynamic lithography', Wear, 522, pp. 204694 - 204694, http://dx.doi.org/10.1016/j.wear.2023.204694

Yu Z; Zhang L, 2023, 'Design of low wear artificial hip joint considering 3D physiological loading and motion', Wear, 523, pp. 204744 - 204744, http://dx.doi.org/10.1016/j.wear.2023.204744

Che C; Chen X; Zhang L; Yu M, 2023, 'Multiphysics Design of a Resonator Tuning System and Dimensionless Formulae', IEEE Transactions on Instrumentation and Measurement, 72, pp. 1 - 11, http://dx.doi.org/10.1109/tim.2023.3311050

Wu Z; Zhang L; Yang S, 2023, 'On the deformation mechanism of 6H-SiC under the nanogrinding of multiple abrasive grains', Tribology International, 179, pp. 108119 - 108119, http://dx.doi.org/10.1016/j.triboint.2022.108119

Hu J; He Y; Li Z; Zhang L, 2023, 'On the deformation mechanism of SiC under nano-scratching: An experimental investigation', Wear, 522, pp. 204871 - 204871, http://dx.doi.org/10.1016/j.wear.2023.204871

Li Z; Fu J; Zhang L; Ma J; Shen J, 2023, 'Rapid Forming of Nanowire Array on Polyvinylidene Fluoride Polymer Surfaces at Room Temperature by Ultrasonic Loading', Advanced Engineering Materials, 25, http://dx.doi.org/10.1002/adem.202200700

Gain AK; Zhang L, 2023, 'Tribological behavior of eutectic Al–12Si alloy manufactured by selective laser melting', Wear, 522, pp. 204679 - 204679, http://dx.doi.org/10.1016/j.wear.2023.204679

Gain AK; Li Z; Zhang L, 2023, 'Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy', Wear, 523, pp. 204863 - 204863, http://dx.doi.org/10.1016/j.wear.2023.204863

Zhao H; Gain AK; Li Z; Zhang L, 2023, 'Wear of mold surfaces: Interfacial adhesion in precision glass molding', Wear, 524-525, pp. 204847 - 204847, http://dx.doi.org/10.1016/j.wear.2023.204847

Yang S; Zhang L; Wu Z, 2022, 'Subsurface damage minimization of KDP crystals', Applied Surface Science, 604, http://dx.doi.org/10.1016/j.apsusc.2022.154592

Li W; Zhang L; Wu C; Cui Z; Niu C, 2022, 'A new lightweight deep neural network for surface scratch detection', International Journal of Advanced Manufacturing Technology, 123, pp. 1999 - 2015, http://dx.doi.org/10.1007/s00170-022-10335-8

Wang Y; Zhang L; Liu A; Wu C; Li W, 2022, 'Tribological performance of silicone oil based Al2O3 nano lubricant for an Mg alloy subjected to sliding at elevated temperatures', Tribology International, 175, http://dx.doi.org/10.1016/j.triboint.2022.107779

Wang Y; Zhang L; Wu C, 2022, 'Experimental evaluation of a silicone oil as an oxidation inhibitor for magnesium alloy under contact sliding at elevated temperatures', Wear, 506-507, http://dx.doi.org/10.1016/j.wear.2022.204451

Wu C; Zhang L; Qu P; Li S; Jiang Z; Wu Z, 2022, 'A multiscale soft-contact modelling method for rough surfaces in contact with coupled slipping/sliding and rolling', Tribology International, 173, http://dx.doi.org/10.1016/j.triboint.2022.107627

Zhao H; Zhang L; Wu Z; Liu A, 2022, 'Fracture mechanisms of intact rock-like materials under compression', Computers and Geotechnics, 148, http://dx.doi.org/10.1016/j.compgeo.2022.104845

Zhao H; Wu Z; Liu A; Zhang L, 2022, 'Numerical insights into the effect of ITZ and aggregate strength on concrete properties', Theoretical and Applied Fracture Mechanics, 120, http://dx.doi.org/10.1016/j.tafmec.2022.103415

Zhang L; Wu Z; Wu C; Wu Q, 2022, 'On the numerical modelling of composite machining', Composites Part B: Engineering, 241, http://dx.doi.org/10.1016/j.compositesb.2022.110023

Li C; Ma Y; Sun L; Zhang L; Wu C; Ding J; Duan D; Wang X; Chang Z, 2022, 'An Investigation into the Densification-Affected Deformation and Fracture in Fused Silica under Contact Sliding', Micromachines, 13, http://dx.doi.org/10.3390/mi13071106

Wu Z; Zhang L; Yang S; Wu C, 2022, 'Effects of grain size and protrusion height on the surface integrity generation in the nanogrinding of 6H-SiC', Tribology International, 171, http://dx.doi.org/10.1016/j.triboint.2022.107563

Zhao H; Zhang L; Wu Z; Liu A, 2022, 'A new discrete element model for rock-like materials', Computers and Structures, 261-262, http://dx.doi.org/10.1016/j.compstruc.2021.106730

Li C; Ding J; Zhang L; Wu C; Sun L; Lin Q; Liu Y; Jiang Z, 2022, 'Densification effects on the fracture in fused silica under Vickers indentation', Ceramics International, 48, pp. 9330 - 9341, http://dx.doi.org/10.1016/j.ceramint.2021.12.128

Yang S; Zhang L; Wu Z, 2022, 'Effect of repeated nanoindentations on the deformation of potassium dihydrogen phosphate crystals', Ceramics International, 48, pp. 9595 - 9601, http://dx.doi.org/10.1016/j.ceramint.2021.12.157

Li W; Zhang LC; Wu CH; Cui ZX; Niu C; Wang Y, 2022, 'Debris effect on the surface wear and damage evolution of counterpart materials subjected to contact sliding', Advances in Manufacturing, 10, pp. 72 - 86, http://dx.doi.org/10.1007/s40436-021-00377-8

Li W; Zhang L; Wu C; Cui Z; Niu C, 2022, 'Influence of tool and workpiece properties on the wear of the counterparts in contact sliding', Journal of Tribology, 144, http://dx.doi.org/10.1115/1.4050902

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2022, 'HD-lubricated high-speed small reduction rolling of hard steel strips with elastically deformable work rolls', Tribology International, 165, http://dx.doi.org/10.1016/j.triboint.2021.107295

Wei J; Zhang Y; Dong G; Zhang L; Zhang F, 2022, 'Surface integrity of Inconel 718 in electrical discharge grinding', The International Journal of Advanced Manufacturing Technology, 123, pp. 3275 - 3283, http://dx.doi.org/10.1007/s00170-022-10400-2

Rahaman ML; Zhang L, 2022, 'Temperature effect on the friction and wear of an Al-60Si alloy', The International Journal of Advanced Manufacturing Technology, 121, pp. 877 - 888, http://dx.doi.org/10.1007/s00170-022-09381-z

Wu Z; Zhang L; Yang S, 2021, 'Effect of abrasive grain position patterns on the deformation of 6H-silicon carbide subjected to nano-grinding', International Journal of Mechanical Sciences, 211, http://dx.doi.org/10.1016/j.ijmecsci.2021.106779

Wu Z; Zhang L, 2021, 'Mechanical properties and deformation mechanisms of surface-modified 6H-silicon carbide', Journal of Materials Science and Technology, 90, pp. 58 - 65, http://dx.doi.org/10.1016/j.jmst.2021.02.028

Zhang L; Wu C; Sedaghat H, 2021, 'A note on the applicability of a constitutive model with acoustoplasticity to high strain rate deformation induced by high frequency impacts', International Journal of Impact Engineering, 157, http://dx.doi.org/10.1016/j.ijimpeng.2021.103977

Back to profile page