Select Publications

Conference Papers

Vijayaraghavan V; Zhang LC, 2019, 'Computational modelling of hybrid boron nitride-carbon nanosheets', in Materials Today: Proceedings, ELSEVIER, Gokaraju Rangaraju Inst Engn & Technol, Hyderabad, INDIA, pp. 2403 - 2408, presented at 9th International Conference of Materials Processing and Characterization (ICMPC), Gokaraju Rangaraju Inst Engn & Technol, Hyderabad, INDIA, 08 March 2019 - 10 March 2019, http://dx.doi.org/10.1016/j.matpr.2019.07.087

Liu WD; Zhang LC, 2018, 'Shape Memory Molding: A New Method for Fabricating Polymer Optics', in Yurish SY (ed.), OPTICS, PHOTONICS AND LASERS, INT FREQUENCY SENSOR ASSOC-IFSA, Barcelona, SPAIN, pp. 209 - 210, presented at 1st International Conference on Optics, Photonics and Lasers (OPAL), Barcelona, SPAIN, 09 May 2018 - 11 May 2018, http://www.sensorsportal.com/DOWNLOADS/Proceedings_OPAL-18.pdf

Mylvaganam K; Zhang L, 2018, 'Optical Properties of Potassium Dihydrogen Phosphate Under Applied Stress', in OPTICS, PHOTONICS AND LASERS, INT FREQUENCY SENSOR ASSOC-IFSA, Barcelona, SPAIN, pp. 222 - 223, presented at 1st International Conference on Optics, Photonics and Lasers (OPAL), Barcelona, SPAIN, 09 May 2018 - 11 May 2018

Liu W; Zhang L, 2017, 'Relaxation oscillation in the viscous flow of borosilicate glass', in Key Engineering Materials, pp. 372 - 377, http://dx.doi.org/10.4028/www.scientific.net/KEM.725.372

Monfared A; Liu WD; Zhang LC, 2017, 'Thermomechanical adhesion between metallic glass and die materials', in Materials Science Forum, pp. 1323 - 1327, http://dx.doi.org/10.4028/www.scientific.net/MSF.879.1323

Wu C; Qu P; Zhang L; Li S; Jiang Z, 2016, 'Transient thermal analysis of cold strip rolling considering rough surface contacts', in Yoshida F; Hamasaki H (ed.), Advances in Engineering Plasticity and its Application XIII, Higashi-Hiroshima, Japan., pp. 548 - 553, presented at AEPA2016, Higashi-Hiroshima, Japan., 04 December 2016 - 08 October 2016, http://dx.doi.org/10.4028/www.scientific.net/KEM.725.548

Hou N; Zhang Y; Zhang L; Mylvaganam K; Wei J; Zhang F, 2016, 'An investigation on the surface/subsurface defects in potassium dihydrogen phosphate crystals after fly-cutting', in Jiang W; Yang L; Riemer O; Li S; Wan Y (eds.), Proceedings of SPIE - The International Society for Optical Engineering, SPIE-INT SOC OPTICAL ENGINEERING, Suzhou, PEOPLES R CHINA, presented at 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies - Advanced Optical Manufacturing Technologies, Suzhou, PEOPLES R CHINA, 26 April 2016 - 29 April 2016, http://dx.doi.org/10.1117/12.2243806

Sedaghat ; Xu W; Zhang L; Liu W, 2015, 'A comparative study on Gao-Zhang and Johnson-Cook constitutive models', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoyo, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoyo, Japan, 18 October 2015 - 22 October 2015

Wu QI; Xu W; Zhang L, 2015, 'A finite element analysis of the orthogonal cutting of SiCP/Al composites: Effects of particle fracture and tool-particle relative location', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto, Japan, 18 October 2015 - 22 October 2015

Zhang L; Xu W, 2015, 'A Microstructure-based Finite Element Modelling of the Surface Defect Formation in the Cutting of SiCp/Al Composites', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto, Japan, 18 October 2015 - 22 October 2015

Xu W; Zhang L, 2015, 'Modelling the bending-dominated fibre fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', in Matsubara A (ed.), Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, presented at The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Kyoto, Japan, 18 October 2015 - 22 October 2015

Zhang L, 2015, 'An integral approach to the investigation of high speed metal cutting', in Key Engineering Materials, pp. 217 - 221, http://dx.doi.org/10.4028/www.scientific.net/KEM.626.217

Wu C; Zhang LC; Li SQ; Jiang ZL; Qu PL, 2015, 'Characterizing the Interface Stresses between an Elastic Rough Ball and a Smooth Rigid Plate under Lubrication', in Characterizing the Interface Stresses between an Elastic Rough Ball and a Smooth Rigid Plate under Lubrication, China Metallurgical Industry Press, Shanghai, China, presented at 10th CSM Steel Congress & 6th Baosteel Biennial Academic Conference, Shanghai, China, 21 October 2015 - 23 October 2015, http://cpfd.cnki.com.cn/Article/CPFDTOTAL-ZGJS201510002126.htm

Cao Y; Zhang LIANGCHI, 2015, 'STRUCTURE AND TEXTURE COMPLEXITIES IN THE TRIBOLAYER OF A DUAL PHASE AL-SI COMPOSITE UNDER CONTACT SLIDING', in Zaïri F (ed.), STRUCTURE AND TEXTURE COMPLEXITIES IN THE TRIBOLAYER OF A DUAL PHASE AL-SI COMPOSITE UNDER CONTACT SLIDING, International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), Lille, France, presented at International Conference on Mechanics of Complex Solids and Fluids (ICMCSF), Lille, France, 17 May 2015 - 22 May 2015

Wu C; Zhang LC; Li SQ; Jiang ZL; Qu PL, 2015, 'A unified approach for characterizing Multiple lubrication regimes involving multi-scale plastic deformation', in Proceedings of the 42th Leeds-Lyon Symposium on Tribology, 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, presented at 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 06 September 2015 - 09 September 2015, http://leeds-lyon.sciencesconf.org/62671/document

Ding WF; Dai JB; Zhang LC; Xu JH, 2014, 'An investigation on the chip formation and forces in the grinding of Inconel718 alloy using the single-grain method', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia, Barton, A.C.T. Engineers Australia, Melbourne, pp. 851 - 858, presented at The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, 24 December 2014 - 26 December 2014

Herasati S; Zhang L, 2014, 'Effect of Carbon Nanotube Additions on the Mechanical Properties of Composites', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia, Barton, A.C.T. Engineers Australia, Melbourne, pp. 198 - 202, presented at The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, 24 December 2014 - 26 December 2014

Rahaman ML; Zhang LC, 2014, 'Effect of statistical surface parameters on the interface temperature estimation of two solids in contact sliding', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia, Barton, A.C.T. Engineers Australia, Melbourne, pp. 859 - 866, presented at The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, 24 December 2014 - 26 December 2014

Liu W; Zhang LC, 2014, 'Nonlinear mechanics of optical glass in its super-cooled liquid region', in The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia, Barton, A.C.T. Engineers Australia, Melbourne, pp. 1 - 8, presented at The 8th Australasian Congress on Applied Mechanics 2014, Melbourne, 24 November 2014 - 26 December 2014

Xu W; Zhang L, 2014, 'A Finite Element Analysis Of The Fibre Fracture In A Polymer Composite During Vibration-Assisted Cutting', in Das ; John (ed.), The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8, Australasian Congress on Applied Mechanics, Engineers Australia. National Committee on Applied Mechanics, Melbourne, pp. 1013 - 1020, presented at 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne, 23 November 2014 - 26 November 2014

Mylvaganam K; Zhang LC, 2014, 'Anisotropy Effect in the Nanoscratching of Silicon', in Das R; John S (ed.), The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 /​ National Committee on Applied Mechanics of Engineers Australia., Barton, A.C.T. Engineers Australia, 2014, Melbourne, Vic., presented at ACAM 8, Melbourne, Vic., 23 November 2014 - 26 November 2014

Liu W; Zhang LC, 2014, 'Understanding the Formation Mechanism of Residual Stress during Precision Glass Moulding', in Hwang YM; Jiang CP (ed.), Proceedings of 'Advances in Engineering Plasticity XII' the 12th Asia-Pacific Conference on Engineering Plasticity and Its Application (AEPA 2014), Trans Tech Publications, Kaohsiung, Taiwan, presented at 12th Asia-Pacific Conference on Engineering Plasticity and Its. Applications, Kaohsiung, Taiwan, 01 September 2014 - 05 September 2014

Moridi A; Zhang LC, 2014, 'Thermal conductivity measurement of crystalline silicon on sapphire using high frequency 3-omega method', in 5th International Conference on Advanced Nano Materials (ANM2014), International Conference on Advanced Nanomaterials, Aveiro, Portugal, presented at International Conference on Advanced Nanomaterials, Aveiro, Portugal, 02 July 2014 - 04 July 2014, http://anm2014.com/

Peng J; Zhang LC; Lu XC, 2014, 'Elastic-plastic deformation of KDP crystals under Nanoindentation', in Materials Science Forum, pp. 705 - 711, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.705

Liu WD; Zhang LC, 2014, 'Nonlinear mechanics of optical glass in its super-cooled liquid region', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 252 - 260

Liu YT; Zhang L, 2014, 'Form Error Prediction of Aspheric Ultraprecision Machining Based on Response Surface Methodology', in Proceedings of The 15th International Conference on Precision Engineering, The Japan Society for Precision Engineering, Kanazawa, Ishikawa, Japan, pp. 220 - 224, presented at The 15th International Conference on Precision Engineering, Kanazawa, Ishikawa, Japan, 23 July 2014 - 25 July 2014, http://icpe2014.jspe.or.jp/

Nguyen T; Liu M; Zhang LC; Wu Q; Sun D, 2014, 'Effect of Cyclic Heating on the Hardened Layer Properties Generated by Plunge Cylindrical Grinding', in Advanced Materials Research, pp. 539 - 543, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.539

Xu WX; Zhang LC, 2014, 'Effect of Frequency and Amplitude on the Performance of Elliptic Vibration-Assisted Cutting of Fibre-Reinforced Polymer Composites', in Advanced Materials Research, pp. 753 - 757, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.753

Liu M; Nguyen T; Zhang LC; Wu Q; Sun DL, 2014, 'On the Profile and Microstructure Variations of Grinding-Induced Hardening Layer in A Cylindrical Workpiece', in Advanced Materials Research, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.3

Rahaman ML; Zhang L, 2014, 'Estimation of interface temperature during the pin-on-disk contact sliding of bulk metallic glass', in Proceedings of the10th International Conference on Mechanical Engineering 2013, Organizing Committee ICME2013, Paper ID 107, Dhaka, Bangladesh, pp. 1 - 7, presented at International Conference on Mechanical Engineering 2013, Dhaka, Bangladesh, 20 June 2014 - 21 July 2014, http://www.buet.ac.bd/icme/icme2013.html

Zhang L; Liu M; Ruan H, 2013, 'On the Origin of Residual Stresses in Semiconductor Thin Film Systems', in Chen W; Xu R; Wang H (eds.), Proceedings of the 2013 Symposium on Solid Mechanics and Its Applications, 2013 Symposium on Solid Mechanics and Its Applications, Hangzhou, China, pp. 342 - 364, presented at 2013 Symposium on Solid Mechanics and Its Applications, Hangzhou, China, 14 August 2013 - 16 August 2013

Liu M; Wu Q; Zhang L; Sun D; Nguyen T, 2013, 'Towards the uniformity of the grinding-induced hardening layer in cylindrical workpieces', in Proceedings of the Fifth Baosteel Biennial Academic Conference, Shanghai Scientific and Technological Literature Publishing House, Shanghai, China, pp. K14 - K20, presented at The 5th Baosteel Biennial Academic Conference, Shanghai, China, 04 June 2013 - 06 June 2013

Zhang YX; Soe KT; Zhang LC, 2013, 'High velocity impact responses of engineered cementitious composite panels', in ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, pp. 755 - 759, http://dx.doi.org/10.3850/978-981-07-5354-2-M-7-75

Rahaman ML; Zhang LC; Ruan HH, 2013, 'Tribological behaviour of metallic glass: The underlying mechanism', in 5th World Tribology Congress, WTC 2013, pp. 3250 - 3253

Rahaman ML; Zhang LC; Ruan HH, 2013, 'Tribological behaviour of metallic glass: the underlying mechanism', in Proceedings of 5th World Tribology Congress 2013, 5th World Tribology Congress Organizer. Paper number 96, Turin, Italy, pp. 1 - 4, presented at 5th World Tribology Congress 2013, Turin, Italy, 08 September 2013 - 13 September 2013, http://www.wtc2013.it/

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2013, 'Three-dimensional simulation of mixed lubrication in metal strip rolling', in Proceedings of the Fifth Baosteel Biennial Academic Conference, Shanghai Scientific and Technological Literature Publishing House, Shanghai, China, pp. C56 - C63, presented at The 5th Baosteel Biennial Academic Conference, Shanghai, China, 04 June 2013 - 06 June 2013

Yao Q; Ruan HH; Zhang LC, 2012, 'A method for estimating the fracture toughness of rocks', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 10, presented at 7th Australasian Congress on Applied Mechanics, ACAM 7, Adelaide, Australia, 09 December 2012 - 12 December 2012

Jin X; Zhang LC, 2012, 'An Assessment of two statistical models for elastic contact analysis between rough surfaces', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 585 - 593, presented at 7th Australasian Congress of Applied Mechanics, Adelaide, 09 December 2012 - 12 December 2012

Liu M; Ruan HH; Zhang LC, 2012, 'Origin of the implantation and annealing effects on residual stress release in a silicon-on-sapphire system during epitaxial re-growth', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 7, presented at 7th Australasian Congress on Applied Mechanics, Adelaide, Australia, 09 December 2012 - 12 December 2012

Liu WD; Ruan HH; Zhang LC, 2012, 'The mechanism of nano-scale shear banding in metallic glass', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 8, presented at 7th Australasian Congress on Applied Mechanics, ACAM 7, Adelaide, Australia, 09 December 2012 - 12 December 2012

Zhang LC; Duan C; Gao C, 2012, 'Understanding the deformation of metals in high speed cutting', in Proceeding of 10th International Conference on Progress of Machining Technology, Japan Society of Precision Engineering (Accepted 30 April 2012; Paper ID: 1002), Japan, pp. 1 - 6, presented at 10th International Conference on Progress of Machining Technology, Tsubame, Japan, 25 September 2012 - 27 September 2012

Zhang LC; Basak AK, 2012, 'AN ACCURATE PREDICTION OF SILICON PHASES UNDER NANOINDENTATION', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, Tsubame, JAPAN, pp. 129 - 132, presented at 10th International Conference on Progress of Machining Technology (ICPMT2012), Tsubame, JAPAN, 25 September 2012 - 27 September 2012, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000327044000032&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zhang L, 2012, 'High Speed Cutting of Metals: Shear Banding and Constitutive Modelling', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, Tsubame, JAPAN, pp. 1 - 1, presented at 10th International Conference on Progress of Machining Technology (ICPMT2012), Tsubame, JAPAN, 25 September 2012 - 27 September 2012, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000327044000001&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zhang LC; Basak AK, 2012, 'PLASTIC DEFORMATION BEHAVIOR IN BULK METALLIC GLASS UNDER A CUTTING TIP', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, Tsubame, JAPAN, pp. 117 - 120, presented at 10th International Conference on Progress of Machining Technology (ICPMT2012), Tsubame, JAPAN, 25 September 2012 - 27 September 2012, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000327044000029&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zhang LC; Duan CZ; Gao CY, 2012, 'UNDERSTANDING THE DEFORMATION OF METALS IN HIGH SPEED CUTTING', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, Tsubame, JAPAN, pp. 2 - 5, presented at 10th International Conference on Progress of Machining Technology (ICPMT2012), Tsubame, JAPAN, 25 September 2012 - 27 September 2012, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000327044000002&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Mylvaganam K; Zhang LC, 2012, 'Effect residual stresses on the stability of bct-5 silicon', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser, Wollongong, Australia, pp. 1 - 6, presented at 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Sydney, 23 September 2012 - 26 September 2012, http://dx.doi.org/10.1016/j.commatsci.2013.06.052

Peng J; Zhang LC; Lu XY, 2012, 'Elastic-plastic deformation of KDP crystals under nanoindentation', in Tieu AK; Zhu H; Zhu Q (eds.), Proceedings of the 15th International Conference on Advances in Materials and Processing Technologies, The Conference Organising Committee, Wollongong, pp. 705 - 711, presented at 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Sydney, 23 September 2012 - 26 September 2012, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.705

Cui D; Zhang LC; Mylvaganam K, 2012, 'Nano-milling on Copper - A Molecular Dynamics Analysis', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser Paper No. 11306, Wollongong, Australia, pp. 1 - 7, presented at 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Sydney, 23 September 2012 - 26 September 2012, http://www.ampt2012.org/

Liu M; Ruan HH; Zhang LC, 2012, 'Methodologies for measuring residual stress distributions in epitaxial thin films', in Proceeding of 8th International Symposium on Precision Engineering Measurements and Instrumentation, Society of Photo-optical Instrumentation Engineers (SPIE), Bellingham, USA, pp. 1 - 8, presented at 8th International Symposium on Precision Engineering Measurements and Instrumentation, Chengdu, China, 08 August 2012 - 11 August 2012, http://dx.doi.org/10.1117/12.2014850

Sul J; Prusty BG; Kelly DW; Zhang LC; Christensen S, 2012, 'Molecular Dynamics modelling of carbon nanotube reinforcement in polymer resin', in http://paginas.fe.up.pt/~icnmmcs/Proceedings.pdf, International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino, Italy, presented at International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino, Italy, 18 June 2012 - 20 June 2012, http://paginas.fe.up.pt/~icnmmcs/abstracts/189.pdf


Back to profile page