By Scientia Professor Liangchi Zhang

Journal articles

Mylvaganam K; Zhang L, 2019, 'Effect of external stresses on the optical and electronic properties of potassium dihydrogen phosphate crystals', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/aafa2d

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Luo G; Sun L; Zhang L, 2019, 'An Analytical Equivalent Circuit Model for Optimization Design of a Broadband Piezoelectric Micromachined Ultrasonic Transducer with an Annular Diaphragm', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 66, pp. 1760 - 1776, http://dx.doi.org/10.1109/TUFFC.2019.2928147

Liu W; Zhang L; Moridi A, 2019, 'Finite element analysis of the 3ω method for characterising high thermal conductivity ultra-thin film/substrate system', Coatings, 9, pp. 87, http://dx.doi.org/10.3390/COATINGS9020087

Vijayaraghavan V; Zhang L, 2019, 'Tensile and interfacial loading characteristics of boron nitride-carbon nanosheet reinforced polymer nanocomposites', Polymers, 11, pp. 1075, http://dx.doi.org/10.3390/POLYM11061075

Zhang Y; Hou N; Zhang LC, 2018, 'Investigation into the room temperature creep-deformation of potassium dihydrogen phosphate crystals using nanoindentation', Advances in Manufacturing, 6, pp. 376 - 383, http://dx.doi.org/10.1007/s40436-018-0234-9

Hoffman M; Zhang L, 2018, 'The Rising Importance of Precision Engineering', Engineering, 4, pp. 759, http://dx.doi.org/10.1016/j.eng.2018.11.007

Gain AK; Zhang L, 2018, 'The effects of TiO2 nanoparticles addition on the thermal shock resistance, shear strength and IMC layer growth of SAC305 alloy', Materialia, 3, pp. 64 - 73, http://dx.doi.org/10.1016/j.mtla.2018.10.009

Liu W; Zhang L, 2018, 'Mechanisms of the complex thermo-mechanical behavior of polymer glass across a wide range of temperature variations', Polymers, 10, pp. 1153, http://dx.doi.org/10.3390/polym10101153

Wu Z; Liu W; Zhang L, 2018, 'Critical loading conditions of amorphization, phase transformation, and dilation cracking in 6H-silicon carbide', Journal of the American Ceramic Society, 101, pp. 3585 - 3596, http://dx.doi.org/10.1111/jace.15527

Li C; Sun L; Yang S; Zhang L; Wu C; Jiang Z, 2018, 'Three-dimensional characterization and modeling of diamond electroplated grinding wheels', International Journal of Mechanical Sciences, 144, pp. 553 - 563, http://dx.doi.org/10.1016/j.ijmecsci.2018.06.010

Zhao B; Yu T; Ding W; Zhang L; Su H; Chen Z, 2018, 'Effect of micropores on the microstructure and mechanical properties of porous Cu-Sn-Ti composites', Materials Science and Engineering: A, 730, pp. 345 - 354, http://dx.doi.org/10.1016/j.msea.2018.06.013

Wu Q; Xu W; Zhang L, 2018, 'A micromechanics analysis of the material removal mechanisms in the cutting of ceramic particle reinforced metal matrix composites', Machining Science and Technology, 22, pp. 638 - 651, http://dx.doi.org/10.1080/10910344.2017.1382516

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2018, 'A multi-field analysis of hydrodynamic lubrication in high speed rolling of metal strips', International Journal of Mechanical Sciences, 142-143, pp. 468 - 479, http://dx.doi.org/10.1016/j.ijmecsci.2018.05.021

Vijayaraghavan V; Zhang L, 2018, 'Effective mechanical properties and thickness determination of boron nitride nanosheets using molecular dynamics simulation', Nanomaterials, 8, pp. 546, http://dx.doi.org/10.3390/nano8070546

Monfared A; Liu W; Zhang L, 2018, 'Metallic glass hardening after thermoplastic forming', Materials Science and Engineering: A, 725, pp. 181 - 186, http://dx.doi.org/10.1016/j.msea.2018.04.021

Khaled ME; Zhang L; Liu W, 2018, 'Some critical issues in the characterization of nanoscale thermal conductivity by molecular dynamics analysis', Modelling and Simulation in Materials Science and Engineering, 26, http://dx.doi.org/10.1088/1361-651X/aabd3d

Zhao G; Wu C; Zhang L; Song J; Ding Q, 2018, 'Friction and wear behavior of PI and PTFE composites for ultrasonic motors', Polymers for Advanced Technologies, 29, pp. 1487 - 1496, http://dx.doi.org/10.1002/pat.4260

Xu W; Zhang L, 2018, 'Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites', Composite Structures, 188, pp. 257 - 265, http://dx.doi.org/10.1016/j.compstruct.2018.01.018

Zhao B; Gain AK; Ding W; Zhang L; Li X; Fu Y, 2018, 'A review on metallic porous materials: pore formation, mechanical properties, and their applications', International Journal of Advanced Manufacturing Technology, 95, pp. 2641 - 2659, http://dx.doi.org/10.1007/s00170-017-1415-6

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2018, 'A simple approach for analysing the surface texture transfer in cold rolling of metal strips', International Journal of Advanced Manufacturing Technology, 95, pp. 597 - 608, http://dx.doi.org/10.1007/s00170-017-1218-9

Basak AK; Zhang L, 2018, 'Deformation of Ti-Based Bulk Metallic Glass Under a Cutting Tip', Tribology Letters, 66, http://dx.doi.org/10.1007/s11249-017-0975-9

Yu J; Zeng X; Zhang L; Yin C; Chen Y; Liu Y; Cheng S; Lai Y; He K; Xue Q, 2018, 'Inverse spin Hall effect induced by linearly polarized light in the topological insulator Bi2Se3', Optics Express, 26, pp. 4832 - 4841, http://dx.doi.org/10.1364/OE.26.004832

Moridi A; Zhang L; Liu W; Duvall S; Brawley A; Jiang Z; Yang S; Li C, 2018, 'Characterisation of high thermal conductivity thin-film substrate systems and their interface thermal resistance', Surface and Coatings Technology, 334, pp. 233 - 242, http://dx.doi.org/10.1016/j.surfcoat.2017.11.021

Shen J; Wu C; Zhang L, 2018, 'Effects of sliding speed and lubrication on the tribological behaviour of stainless steel', International Journal of Advanced Manufacturing Technology, 94, pp. 341 - 350, http://dx.doi.org/10.1007/s00170-017-0907-8

Gain AK; Zhang L, 2018, 'Growth nature of in-situ Cu6Sn5-phase and their influence on creep and damping characteristics of Sn-Cu material under high-temperature and humidity', Microelectronics Reliability, 87, pp. 278 - 285

Gain AK; Zhang, Liangchi , 2018, 'High-temperature and humidity change the microstructure and degrade the material properties of tin-silver interconnect material', Microelectronics Reliability, 83, pp. 101 - 110, http://dx.doi.org/10.1016/j.microrel.2018.02.022

Gain AK; Zhang L, 2018, 'Thermal aging effects on microstructure, elastic property and damping characteristic of a eutectic Sn-3.5Ag solder', Journal of Materials Science: Materials in Electronics, http://dx.doi.org/10.1007/s10854-018-9586-y

Xu W; Zhang L, 2017, 'A new approach to characterising the surface integrity of fibre-reinforced polymer composites during cutting', Composites Part A: Applied Science and Manufacturing, 103, pp. 272 - 282, http://dx.doi.org/10.1016/j.compositesa.2017.10.015

Wu C; Zhang L; Qu P; Li S; Jiang Z; Liu W, 2017, 'Characterization of interface stresses and lubrication of rough elastic surfaces under ball-on-disc rolling', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231, pp. 1552 - 1573, http://dx.doi.org/10.1177/1350650117700793

Ding W; Li H; Zhang L; Xu J; Fu Y; Su H, 2017, 'Diamond wheel dressing: A comprehensive review', Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139, http://dx.doi.org/10.1115/1.4037991

Liu WD; Zhang LC; Mylvaganam K, 2017, 'Relaxation oscillation of borosilicate glasses in supercooled liquid region', Scientific Reports, 7, pp. 15872, http://dx.doi.org/10.1038/s41598-017-16079-w

Gao CY; Xiao JZ; Zhang LC; Ke YL, 2017, 'On the static and dynamic properties of fiber-reinforced polymer composites', Journal of Thermoplastic Composite Materials, 30, pp. 1560 - 1577, http://dx.doi.org/10.1177/0892705716646418

Gain AK; Zhang L, 2017, 'Effect of Ag nanoparticles on microstructure, damping property and hardness of low melting point eutectic tin–bismuth solder', Journal of Materials Science: Materials in Electronics, 28, pp. 15718 - 15730, http://dx.doi.org/10.1007/s10854-017-7465-6

Wang Z; Li J; Fang QH; Liu B; Zhang L, 2017, 'Investigation into nanoscratching mechanical response of AlCrCuFeNi high-entropy alloys using atomic simulations', Applied Surface Science, 416, pp. 470 - 481, http://dx.doi.org/10.1016/j.apsusc.2017.04.009

Wu Z; Liu W; Zhang L, 2017, 'Revealing the deformation mechanisms of 6H-silicon carbide under nano-cutting', Computational Materials Science, 137, pp. 282 - 288, http://dx.doi.org/10.1016/j.commatsci.2017.05.048

Gain AK; Zhang L, 2017, 'Effect of isothermal aging on microstructure, electrical resistivity and damping properties of Sn–Ag–Cu solder', Journal of Materials Science: Materials in Electronics, 28, pp. 9363 - 9370, http://dx.doi.org/10.1007/s10854-017-6675-2

Liu W; Zhang L, 2017, 'Numerical optimization platform for precision glass molding by the simplex algorithm', Applied Optics, 56, pp. 3245 - 3250, http://dx.doi.org/10.1364/AO.56.003245

Rahaman ML; Zhang L, 2017, 'An investigation into the friction and wear mechanisms of aluminium high silicon alloy under contact sliding', Wear, Volumes 376–377, pp. 940 - 946, http://dx.doi.org/10.1016/j.wear.2016.10.026

Rahaman ML; Zhang L, 2017, 'Size effect on friction and wear mechanisms of bulk metallic glass', Wear, Volumes 376–377, pp. 1522 - 1527, http://dx.doi.org/10.1016/j.wear.2017.01.068

Cui DD; Zhang LC, 2017, 'Nano-machining of materials: understanding the process through molecular dynamics simulation', Advances in Manufacturing, 5, pp. 20 - 34, http://dx.doi.org/10.1007/s40436-016-0155-4

Pramanik A; Zhang LC, 2017, 'Particle fracture and debonding during orthogonal machining of metal matrix composites', Advances in Manufacturing, 5, pp. 77 - 82, http://dx.doi.org/10.1007/s40436-017-0170-0

Do Q; Obyrne S; Liu M; Zhang L, 2017, 'Piezoresistive Behavior of MWCNT-UHMWPE Composite for Compressive Stress Sensing Applications', IEEE Transactions on Nanotechnology, 16, pp. 265 - 273, http://dx.doi.org/10.1109/TNANO.2017.2662087

Zhang L; Liu W, 2017, 'Precision glass molding: Toward an optimal fabrication of optical lenses', Frontiers of Mechanical Engineering, 12, pp. 3 - 17, http://dx.doi.org/10.1007/s11465-017-0408-3

Ding W; Zhang L; Li Z; Zhu Y; Su H; Xu J, 2017, 'Review on grinding-induced residual stresses in metallic materials', International Journal of Advanced Manufacturing Technology, 88, pp. 2939 - 2968, http://dx.doi.org/10.1007/s00170-016-8998-1

Cui D; Zhang L; Mylvaganam K; Liu W; Xu W, 2017, 'Nano-milling on monocrystalline copper: A molecular dynamics simulation', Machining Science and Technology, 21, pp. 67 - 85, http://dx.doi.org/10.1080/10910344.2016.1260430

Wu C; Qu P; Zhang L; Li S; Jiang Z, 2017, 'A numerical and experimental study on the interface friction of ball-on-disc test under high temperature', Wear, 376-377, pp. 433 - 442, http://dx.doi.org/10.1016/j.wear.2016.11.035

Rad ZF; Nordon RE; Anthony CJ; Bilston L; Prewett PD; Arns JY; Arns CH; Zhang L; Davies GJ, 2017, 'High-fidelity replication of thermoplastic microneedles with open microfluidic channels', Microsystems and Nanoengineering, 3, pp. 17034, http://dx.doi.org/10.1038/micronano.2017.34

Rahaman ML; Zhang L, 2017, 'Interface temperature during contact sliding of two solids: Relationship between predicted flash temperature and the experimentally measured', Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231, pp. 3 - 13, http://dx.doi.org/10.1177/1350650116644353

Monfared A; Liu W; Zhang L, 2017, 'On the adhesion between metallic glass and dies during thermoplastic forming', Journal of Alloys and Compounds, 711, pp. 235 - 242, http://dx.doi.org/10.1016/j.jallcom.2017.04.005

Gain AK; Zhang L, 2017, 'Effect of thin gold/nickel coating on the microstructure, wettability and hardness of lead-free tin-bismuth-silver solder', Journal of Materials Science: Materials in Electronics, 28, pp. 4885 - 4896, http://dx.doi.org/10.1007/s10854-016-6136-3

Back to profile page