By Scientia Professor Liangchi Zhang

Journal articles

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2016, 'A unified method for characterizing multiple lubrication regimes involving plastic deformation of surface asperities', Tribology International, 100, pp. 70 - 83, http://dx.doi.org/10.1016/j.triboint.2015.11.020

Fang QH; Zhang LC, 2016, 'Coupled effect of grain boundary sliding and dislocation emission on fracture toughness of nanocrystalline materials', Journal of Micromechanics and Molecular Physics, 1, http://dx.doi.org/10.1142/S2424913016500089

Luo N; Jing HW; Ma ZG; Liu W; Zhang L; Sun G, 2016, 'Erratum: Synthesis of polymorphic titanium oxide nanoparticles by a rapid gas-phase chemical reaction (Mendeleev Communications (2016) 26 (157–159))', Mendeleev Communications, 26, pp. 364, http://dx.doi.org/10.1016/j.mencom.2016.07.034

Zhang Y; Zhang LC; Liu M; Zhang FH; Mylvaganam K; Liu WD, 2016, 'Revealing the mechanical properties of potassium dihydrogen phosphate crystals by nanoindentation', Journal of Materials Research, 31, pp. 1056 - 1064, http://dx.doi.org/10.1557/jmr.2016.91

Gain AK; Zhang L, 2016, 'Interfacial microstructure, wettability and material properties of nickel (Ni) nanoparticle doped tin–bismuth–silver (Sn–Bi–Ag) solder on copper (Cu) substrate', Journal of Materials Science: Materials in Electronics, 27, pp. 3982 - 3994, http://dx.doi.org/10.1007/s10854-015-4252-0

Xu W; Zhang L; Wu Y, 2016, 'Effect of tool vibration on chip formation and cutting forces in the machining of fiber-reinforced polymer composites', Machining Science and Technology, 20, pp. 312 - 329, http://dx.doi.org/10.1080/10910344.2016.1168930

Liu YT; Zhang L, 2016, 'An investigation into the aspheric ultraprecision machining using the response surface methodology', Precision Engineering, 44, pp. 203 - 210, http://dx.doi.org/10.1016/j.precisioneng.2015.12.006

Mylvaganam K; Zhang L, 2016, 'Graphene nanosheets: Mechanisms for large-area thin films production', Scripta Materialia, 115, pp. 145 - 149, http://dx.doi.org/10.1016/j.scriptamat.2016.01.001

Xu W; Zhang L, 2016, 'Mechanics of fibre deformation and fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, 103, pp. 40 - 52, http://dx.doi.org/10.1016/j.ijmachtools.2016.01.002

Liu WD; Liu M; Zhang LC, 2016, 'Oxidation-induced mechanical deterioration and hierarchical cracks in glassy carbon', Carbon, 100, pp. 178 - 186, http://dx.doi.org/10.1016/j.carbon.2016.01.006

Gain AK; Zhang L; Quadir MZ, 2016, 'Composites matching the properties of human cortical bones: the design of porous titanium-zirconia (Ti-ZrO2) nanocomposites using polymethyl methacrylate powders', Materials Science & Engineering A, 662, pp. 258 - 267, http://dx.doi.org/10.1016/j.msea.2016.03.066

Cao Y; Zhang LC; Zhang Y, 2016, 'Twinning interactions induced amorphisation in ultrafine silicon grains', Materials Science and Engineering: A, 658, pp. 321 - 325, http://dx.doi.org/10.1016/j.msea.2016.02.014

Li J; Guo J; Luo H; Fang Q; Wu H; Zhang L; Liu Y, 2016, 'Study of nanoindentation mechanical response of nanocrystalline structures using molecular dynamics simulations', APPLIED SURFACE SCIENCE, 364, pp. 190 - 200, http://dx.doi.org/10.1016/j.apsusc.2015.12.145

Li J; Guo J; Luo H; Fang Q; Wu H; Zhang L; Liu Y, 2016, 'Study of nanoindentation mechanical response of nanocrystalline structures using molecular dynamics simulations', Applied Surface Science, 364, pp. 190 - 200, http://dx.doi.org/10.1016/j.apsusc.2015.12.145

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2016, 'A unified method for characterizing multiple lubrication regimes involving plastic deformation of surface asperities', Tribology International, 100, pp. 70 - 83, http://dx.doi.org/10.1016/j.triboint.2015.11.020

Hou N; Zhang Y; Zhang L; Zhang F, 2016, 'Assessing microstructure changes in potassium dihydrogen phosphate crystals induced by mechanical stresses', Scripta Materialia, 113, pp. 48 - 50, http://dx.doi.org/10.1016/j.scriptamat.2015.10.002

Gain AK; Zhang L, 2016, 'Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin–bismuth (Sn–Bi) solder', Journal of Materials Science: Materials in Electronics, 27, pp. 781 - 794, http://dx.doi.org/10.1007/s10854-015-3817-2

Cai Y; Chen YL; Shimizu Y; Ito S; Gao W; Zhang L, 2016, 'Molecular dynamics simulation of subnanometric tool-workpiece contact on a force sensor-integrated fast tool servo for ultra-precision microcutting', Applied Surface Science, 369, pp. 354 - 365, http://dx.doi.org/10.1016/j.apsusc.2016.02.046

Gain AK; Zhang L, 2016, 'Microstructure, mechanical and electrical performances of zirconia nanoparticles-doped tin-silver-copper solder alloys', Journal of Materials Science: Materials in Electronics, 27, pp. 7524 - 7533, http://dx.doi.org/10.1007/s10854-016-4732-x

Liu YT; Zhang L, 2015, 'An investigation into the aspheric ultraprecision machining using the response surface methodology', Precision Engineering, http://dx.doi.org/10.1016/j.precisioneng.2015.12.006

Dai J; Ding W; Zhang L; Xu J; Su H, 2015, 'Understanding the effects of grinding speed and undeformed chip thickness on the chip formation in high-speed grinding', International Journal of Advanced Manufacturing Technology, 81, pp. 995 - 1005, http://dx.doi.org/10.1007/s00170-015-7265-1

Gain AK; Zhang L, 2015, 'Growth mechanism of intermetallic compound and mechanical properties of nickel (Ni) nanoparticle doped low melting temperature tin–bismuth (Sn–Bi) solder', Journal of Materials Science: Materials in Electronics, http://dx.doi.org/10.1007/s10854-015-3817-2

Xu WX; Zhang LC, 2015, 'Ultrasonic vibration-assisted machining: principle, design and application', Advances in Manufacturing, 3, pp. 173 - 192, http://dx.doi.org/10.1007/s40436-015-0115-4

Mylvaganam K; Zhang L, 2015, 'Effect of crystal orientation on the formation of bct-5 silicon', Applied Physics A: Materials Science and Processing, 120, pp. 1391 - 1398, http://dx.doi.org/10.1007/s00339-015-9323-9

Gain AK; Zhang L; Chan YC, 2015, 'Microstructure, elastic modulus and shear strength of alumina (Al2O3) nanoparticles-doped tin–silver–copper (Sn–Ag–Cu) solders on copper (Cu) and gold/nickel (Au/Ni)-plated Cu substrates', Journal of Materials Science: Materials in Electronics, 26, pp. 7039 - 7048, http://dx.doi.org/10.1007/s10854-015-3325-4

Mylvaganam K; Zhang L; Zhang Y, 2015, 'Stress-induced phase and structural changes in KDP crystals', Computational Materials Science, 109, pp. 359 - 366, http://dx.doi.org/10.1016/j.commatsci.2015.07.044

Liu W; Zhang L, 2015, 'Thermoforming mechanism of precision glass moulding', Applied Optics, 54, pp. 6841 - 6849, http://dx.doi.org/10.1364/AO.54.006841

Rahaman ML; Zhang LC; Liu M; Liu W, 2015, 'Surface roughness effect on the friction and wear of bulk metallic glasses', Wear, http://dx.doi.org/10.1016/j.wear.2014.11.030

Li J; Fang Q; Zhang L; Liu Y, 2015, 'The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation', Computational Materials Science, 98, pp. 252 - 262, http://dx.doi.org/10.1016/j.commatsci.2014.10.069

Li J; Fang Q; Liu Y; Zhang L, 2015, 'Scratching of copper with rough surfaces conducted by diamond tip simulated using molecular dynamics', International Journal of Advanced Manufacturing Technology, 77, pp. 1057 - 1070, http://dx.doi.org/10.1007/s00170-014-6536-6

Gain AK; Zhang L; Liu W, 2015, 'Microstructure and material properties of porous hydroxyapatite-zirconia nanocomposites using polymethyl methacrylate powders', Materials and Design, 67, pp. 136 - 144, http://dx.doi.org/10.1016/j.matdes.2014.11.028

He Z; Fu J; Zhang L; Yao X, 2015, 'A new error measurement method to identify all six error parameters of a rotational axis of a machine tool', International Journal of Machine Tools and Manufacture, 88, pp. 1 - 8, http://dx.doi.org/10.1016/j.ijmachtools.2014.07.009

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2015, 'Effect of asperity plastic deformation on the interface friction in metal forming', Key Engineering Materials, 626, pp. 222 - 227, http://dx.doi.org/10.4028/www.scientific.net/KEM.626.222

Herasati S; Zhang L, 2015, 'Interphase effect on the macroscopic elastic properties of non-bonded single-walled carbon nanotube composites', Composites Part B: Engineering, 77, pp. 52 - 58, http://dx.doi.org/10.1016/j.compositesb.2015.03.015

Li J; Fang Q; Zhang L; Liu Y, 2015, 'Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations', Applied Surface Science, 324, pp. 464 - 474, http://dx.doi.org/10.1016/j.apsusc.2014.10.149

Liu W; Zhang L, 2015, 'Understanding the formation mechanism of residual stress during precision glass moulding', Key Engineering Materials, 626, pp. 182 - 186, http://dx.doi.org/10.4028/www.scientific.net/KEM.626.182

WU Q; XU W; ZHANG L, 2015, '0514 A finite element analysis of the orthogonal cutting of SiC P /Al composites : Effects of particle fracture and tool-particle relative location', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0514-1_

WANG T; ZHANG L; WANG X; XIE L; XU W, 2015, '0515 A Microstructure-based Finite Element Modelling of the Surface Defect Formation in the Cutting of SiCp/Al Composites', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0515-1_

SEDAGHAT H; XU W; ZHANG L; GAO C; LU W; LIU W, 2015, '0610 A comparative study on Gao-Zhang and Johnson-Cook constitutive models', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0610-1_

XU W; ZHANG L, 2015, '2202 Modelling the bending-dominated fibre fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._2202-1_

Liu M; Nguyen T; Zhang L; Wu Q; Sun D, 2015, 'Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component', International Journal of Machine Tools and Manufacture, 89, pp. 55 - 63, http://dx.doi.org/10.1016/j.ijmachtools.2014.11.003

Liu M; Ruan HH; Zhang LC; Moridi A, 2015, 'Temperature-dependent residual stresses in a hetero-epitaxial thin film system', Thin Solid Films, http://dx.doi.org/10.1016/j.tsf.2015.01.072

Gain AK; Zhang L, 2014, 'Microstructure, thermal analysis and damping properties of Ag and Ni nano-particles doped Sn-8Zn-3Bi solder on OSP-Cu substrate', Journal of Alloys and Compounds, 617, pp. 779 - 786, http://dx.doi.org/10.1016/j.jallcom.2014.08.076

Rahaman ML; Zhang L, 2014, 'On the estimation of interface temperature during contact sliding of bulk metallic glass', Wear, 320, pp. 77 - 86, http://dx.doi.org/10.1016/j.wear.2014.08.009

Liu W; Ruan H; Zhang L, 2014, 'Revealing structural relaxation of optical glass through the temperature dependence of Young's modulus', Journal of the American Ceramic Society, 97, pp. 3475 - 3482, http://dx.doi.org/10.1111/jace.13179

Chen J; Fang Q; Zhang L, 2014, 'Investigate on distribution and scatter of surface residual stress in ultra-high speed grinding', International Journal of Advanced Manufacturing Technology, 75, pp. 615 - 627, http://dx.doi.org/10.1007/s00170-014-6128-5

Ding W; Zhang L; Liu W, 2014, 'Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels', Wear, http://dx.doi.org/10.1016/j.wear.2014.12.008

Zhang Y; Zhang L; Liu M; Zhang F; Mylvaganam K; Liu W, 2014, 'Understanding the friction and wear of KDP crystals by nanoscratching', Wear, http://dx.doi.org/10.1016/j.wear.2014.11.032

Herasati S; Zhang L, 2014, 'A new method for characterizing and modeling the waviness and alignment of carbon nanotubes in composites', Composites Science and Technology, 100, pp. 136 - 142, http://dx.doi.org/10.1016/j.compscitech.2014.06.004

Nguyen T; Liu M; Zhang L; Wu Q; Sun D, 2014, 'An Investigation of the Grinding-Hardening Induced by Traverse Cylindrical Grinding', Journal of Manufacturing Science and Engineering, 136, pp. 051008-1 - 051008-10, http://dx.doi.org/10.1115/1.4028058

Back to profile page