By Scientia Professor Liangchi Zhang

Journal articles

Li J; Fang Q; Zhang L; Liu Y, 2015, 'Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations', Applied Surface Science, 324, pp. 464 - 474, http://dx.doi.org/10.1016/j.apsusc.2014.10.149

Liu W; Zhang L, 2015, 'Understanding the formation mechanism of residual stress during precision glass moulding', Key Engineering Materials, 626, pp. 182 - 186, http://dx.doi.org/10.4028/www.scientific.net/KEM.626.182

WU Q; XU W; ZHANG L, 2015, '0514 A finite element analysis of the orthogonal cutting of SiC P /Al composites : Effects of particle fracture and tool-particle relative location', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0514-1_

WANG T; ZHANG L; WANG X; XIE L; XU W, 2015, '0515 A Microstructure-based Finite Element Modelling of the Surface Defect Formation in the Cutting of SiCp/Al Composites', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0515-1_

SEDAGHAT H; XU W; ZHANG L; GAO C; LU W; LIU W, 2015, '0610 A comparative study on Gao-Zhang and Johnson-Cook constitutive models', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._0610-1_

XU W; ZHANG L, 2015, '2202 Modelling the bending-dominated fibre fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2015.8, http://dx.doi.org/10.1299/jsmelem.2015.8._2202-1_

Liu M; Nguyen T; Zhang L; Wu Q; Sun D, 2015, 'Effect of grinding-induced cyclic heating on the hardened layer generation in the plunge grinding of a cylindrical component', International Journal of Machine Tools and Manufacture, 89, pp. 55 - 63, http://dx.doi.org/10.1016/j.ijmachtools.2014.11.003

Liu M; Ruan HH; Zhang LC; Moridi A, 2015, 'Temperature-dependent residual stresses in a hetero-epitaxial thin film system', Thin Solid Films, http://dx.doi.org/10.1016/j.tsf.2015.01.072

Gain AK; Zhang L, 2014, 'Microstructure, thermal analysis and damping properties of Ag and Ni nano-particles doped Sn-8Zn-3Bi solder on OSP-Cu substrate', Journal of Alloys and Compounds, 617, pp. 779 - 786, http://dx.doi.org/10.1016/j.jallcom.2014.08.076

Rahaman ML; Zhang L, 2014, 'On the estimation of interface temperature during contact sliding of bulk metallic glass', Wear, 320, pp. 77 - 86, http://dx.doi.org/10.1016/j.wear.2014.08.009

Liu W; Ruan H; Zhang L, 2014, 'Revealing structural relaxation of optical glass through the temperature dependence of Young's modulus', Journal of the American Ceramic Society, 97, pp. 3475 - 3482, http://dx.doi.org/10.1111/jace.13179

Chen J; Fang Q; Zhang L, 2014, 'Investigate on distribution and scatter of surface residual stress in ultra-high speed grinding', International Journal of Advanced Manufacturing Technology, 75, pp. 615 - 627, http://dx.doi.org/10.1007/s00170-014-6128-5

Ding W; Zhang L; Liu W, 2014, 'Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels', Wear, http://dx.doi.org/10.1016/j.wear.2014.12.008

Zhang Y; Zhang L; Liu M; Zhang F; Mylvaganam K; Liu W, 2014, 'Understanding the friction and wear of KDP crystals by nanoscratching', Wear, http://dx.doi.org/10.1016/j.wear.2014.11.032

Herasati S; Zhang L, 2014, 'A new method for characterizing and modeling the waviness and alignment of carbon nanotubes in composites', Composites Science and Technology, 100, pp. 136 - 142, http://dx.doi.org/10.1016/j.compscitech.2014.06.004

Nguyen T; Liu M; Zhang L; Wu Q; Sun D, 2014, 'An Investigation of the Grinding-Hardening Induced by Traverse Cylindrical Grinding', Journal of Manufacturing Science and Engineering, 136, pp. 051008-1 - 051008-10, http://dx.doi.org/10.1115/1.4028058

Chen J; Fang Q; Zhang L, 2014, 'Investigate on distribution and scatter of surface residual stress in ultra-high speed grinding', The International Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-014-6128-5

Li J; Fang Q; Liu Y; Zhang L, 2014, 'A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding', Applied Surface Science, 303, pp. 331 - 343, http://dx.doi.org/10.1016/j.apsusc.2014.02.178

Herasati S; Zhang LC; Ruan HH, 2014, 'A new method for characterizing the interphase regions of carbon nanotube composites', International Journal of Solids and Structures, 51, pp. 1781 - 1791, http://dx.doi.org/10.1016/j.ijsolstr.2014.01.019

Herasati S; Zhang LC, 2014, 'Elastic properties of single-walled carbon nanotube clusters: Dependence on hydrostatic pressure', Computational Materials Science, 86, pp. 93 - 98, http://dx.doi.org/10.1016/j.commatsci.2014.01.037

Zhang LC, 2014, 'Characterizing the Mechanical Properties of the Hardened Layer Induced by Grinding-Hardening', Machining Science and Technology, 18, pp. 277 - 298, http://dx.doi.org/10.1080/10910344.2014.897845

Jin XL; Zhang LC, 2014, 'Predicting the material removal in polishing: The applicability of two types of statistical models', Machining Science and Technology, 18, pp. 199 - 220, http://dx.doi.org/10.1080/10910344.2014.897838

Cui DD; Zhang LC; Mylvaganam K, 2014, 'Nano-milling on copper: Grooving quality and critical depth of cut', Journal of Computational and Theoretical Nanoscience, 11, pp. 964 - 970, http://dx.doi.org/10.1166/jctn.2014.3451

Tang F; Chen Y; Zhang L, 2014, 'On the generation of surface depressions in polishing polycrystalline diamond compacts', Journal of Physics D: Applied Physics, 47, pp. 125301 - 125301, http://dx.doi.org/10.1088/0022-3727/47/12/125301

Fang Q; Zhang L; Liu Y, 2014, 'Influence of grain boundary sliding and grain size on dislocation emission from a crack tip', International Journal of Damage Mechanics, 23, pp. 192 - 202, http://dx.doi.org/10.1177/1056789513488010

Wu C; Zhang L; Li S; Jiang Z; Qu P, 2014, 'A novel multi-scale statistical characterization of interface pressure and friction in metal strip rolling', International Journal of Mechanical Sciences, 89, pp. 391 - 402, http://dx.doi.org/10.1016/j.ijmecsci.2014.10.004

Mylvaganam K; Zhang L, 2014, 'Effect of residual stresses on the stability of bct-5 silicon', Computational Materials Science, 81, pp. 10 - 14, http://dx.doi.org/10.1016/j.commatsci.2013.06.052

Rahaman ML; Zhang LC; Ruan HH, 2014, 'Effects of environmental temperature and sliding speed on the tribological behaviour of a Ti-based metallic glass', Intermetallics, 52, pp. 36 - 48, http://dx.doi.org/10.1016/j.intermet.2014.03.011

Xu W; Zhang LC, 2014, 'On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, 80-81, pp. 1 - 10, http://dx.doi.org/10.1016/j.ijmachtools.2014.02.004

Cui DD; Mylvaganam K; Zhang LC; Liu WD, 2014, 'Some critical issues for a reliable molecular dynamics simulation of nano-machining', Computational Materials Science, 90, pp. 23 - 31, http://dx.doi.org/10.1016/j.commatsci.2014.03.063

Tang F; Zhang L, 2014, 'Subsurface nanocracking in monocrystalline Si (001) induced by nanoscratching', Engineering Fracture Mechanics, 124-125, pp. 262 - 271, http://dx.doi.org/10.1016/j.engfracmech.2014.02.016

Nguyen T; Liu M; Zhang LC, 2014, 'Cooling by sub-zero cold air jet in the grinding of a cylindrical component', International Journal of Advanced Manufacturing Technology, 73, pp. 341 - 352, http://dx.doi.org/10.1007/s00170-014-5819-2

Zhang LC, 2014, 'Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling', Materials Science and Engineering: A, 613, pp. 379 - 389, http://dx.doi.org/10.1016/j.msea.2014.06.112

Xu W; Zhang LC; Wu Y, 2014, 'Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms', Composites Science and Technology, 92, pp. 103 - 111, http://dx.doi.org/10.1016/j.compscitech.2013.12.011

Chen YQ; Liu W; Feng HB; Zhang LC, 2014, 'Failure mechanisms of CVD diamond wafers and thin films during polishing', Machining Science and Technology, 19, pp. 152 - 173, http://dx.doi.org/10.1080/10910344.2014.991030

Liu W; Zhang LC, 2014, 'On the Nano/Micro-Mechanics of Metallic Glass', Critical Reviews in Solid State and Materials Sciences, http://dx.doi.org/10.1080/10408436.2014.973933

Tang F; Zhang L, 2014, 'Subsurface nanocracking in monocrystalline Si (0 0 1) induced by nanoscratching', Engineering Fracture Mechanics, http://dx.doi.org/10.1016/j.engfracmech.2014.02.016

Liu W; Ruan H; Zhang L, 2014, 'Understanding the brittleness of metallic glasses through dynamic clusters', Journal of Materials Research, 29, pp. 561 - 568, http://dx.doi.org/10.1557/jmr.2014.11

Xu W; liangchi zhang ; Xuyue Wang , 2013, 'Laser Bending of Silicon Sheet: Absorption Factor and Mechanisms', Journal of Manufacturing Science and Engineering, 135, http://dx.doi.org/10.1115/1.4025579

Herasati S; Ruan HH; Zhang LC, 2013, 'Effect of chain morphology and carbon-nanotube additives on the glass transition temperature of polyethylene', Journal of Nano Research, 25, pp. 137 - 144, http://dx.doi.org/10.4028/www.scientific.net/JNanoR.25.137

Moridi A; Ruan H; Zhang L; Liu M, 2013, 'Residual stresses in thin film systems: Effects of lattice mismatch, thermal mismatch and interface dislocations', International Journal of Solids and Structures, 50, pp. 3562 - 3569, http://dx.doi.org/10.1016/j.ijsolstr.2013.06.022

Liu WD; Ruan HH; Zhang LC, 2013, 'Atomic rearrangements in metallic glass: Their nucleation and self-organization', Acta Materialia, 61, pp. 6050 - 6060, http://dx.doi.org/10.1016/j.actamat.2013.06.046

Herasati S; Ruan HH; Zhang LC, 2013, 'Effect of chain morphology and carbon-nanotube additives on the glass transition temperature of polyethylene', Journal of Nano Research, 23, pp. 16 - 23, http://dx.doi.org/10.4028/www.scientific.net/JNanoR.23.16

Fang Q; Zhang L, 2013, 'Emission of partial dislocations in silicon under nanoindentation', Journal of Materials Research, 28, pp. 1995 - 2003, http://dx.doi.org/10.1557/jmr.2013.189

Zhang L; Basak A, 2013, 'Quantitative prediction of phase transformations in silicon during nanoindentation', Philosophical Magazine Letters, 93, pp. 448 - 456, http://dx.doi.org/10.1080/09500839.2013.798441

Rahaman ML; Zhang LC; Ruan HH, 2013, 'Understanding the friction and wear mechanisms of bulk metallic glass under contact sliding', Wear, 304, pp. 43 - 48, http://dx.doi.org/10.1016/j.wear.2013.04.022

Zhang LC; Guo MZ, 2013, 'The characterization of a class of quantum Markov semigroups and the associated operator-valued Dirichlet forms based on Hilbert W*-module', Acta Mathematica Sinica, English Series, 29, pp. 857 - 866, http://dx.doi.org/10.1007/s10114-013-2262-5

Zhang L; Tang C, 2013, 'Friction and wear of diamond-silicon nano-systems: Effect of moisture and surface roughness', Wear, 302, pp. 929 - 936, http://dx.doi.org/10.1016/j.wear.2013.01.004

Uddin MS; Zhang LC, 2013, 'Predicting the wear of hard-on-hard hip joint prostheses', Wear, 301, pp. 192 - 200, http://dx.doi.org/10.1016/j.wear.2013.01.009

Soe KT; Zhang YX; Zhang LC, 2013, 'Impact resistance of hybrid-fiber engineered cementitious composite panels', Composite Structures, 104, pp. 320 - 330, http://dx.doi.org/10.1016/j.compstruct.2013.01.029

Back to profile page