By Scientia Professor Liangchi Zhang

Journal articles

Fang QH; Zhang LC, 2013, 'Prediction of the threshold load of dislocation emission in silicon during nanoscratching', Acta Materialia, 61, pp. 5469 - 5476, http://dx.doi.org/10.1016/j.actamat.2013.05.035

Chen Y; Tang F; Zhang LC, 2013, 'A preparation method of diamond specimens using an advanced FIB microscopy for micro and nanoanalysis', Key Engineering Materials, 531-532, pp. 592 - 595, http://dx.doi.org/10.4028/www.scientific.net/KEM.531-532.592

Duan CZ; Zhang LC, 2013, 'A reliable method for predicting serrated chip formation in high Speed cutting: analysis and experimental verification', International Journal of Advanced Manufacturing Technology, 64, pp. 1587 - 1597, http://dx.doi.org/10.1007/s00170-012-4125-0

Feng H; Fang Q-H; Zhang LC; Liu YW, 2013, 'Effect of cooperative grain boundary sliding and migration on emission of dislocations from a crack tip in nanocrystalline materials', Mechanics of Materials, 61, pp. 39 - 48, http://dx.doi.org/10.1016/j.mechmat.2013.02.006

Gao CY; Zhang LC, 2013, 'Effect of cutting conditions on the serrated chip formation in high speed cutting', Machining Science and Technology, 17, pp. 26 - 40, http://dx.doi.org/10.1080/10910344.2012.747887

Moridi A; Ruan H; Zhang L; Liu M, 2013, 'On the dependence of surface undulation on film thickness', Journal of Physics and Chemistry of Solids, http://dx.doi.org/10.1016/j.jpcs.2013.12.013

Zhang L, 2013, 'P001 Dealing with Rough Surfaces in Manufacturing(LEM21 2013 KEYNOTE SPEAKERS)', Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21, 2013.7, pp. P001 - P001, http://dx.doi.org/10.1299/jsmelem.2013.7.p001

Liu W; Ruan HH; Zhang LC, 2013, 'Plastic deformation clusters with high kinetic energy in metallic glass', Key Engineering Materials, 535-536, pp. 152 - 155, http://dx.doi.org/10.4028/www.scientific.net/KEM.535-536.152

Chen Y; Zhang LC; Feng H, 2013, 'Polishing of CVD Diamond Wafers and Films', Key Engineering Materials, 531-532, pp. 373 - 376, http://dx.doi.org/10.4028/www.scientific.net/KEM.531-532.373

Zhang L; Basak A, 2013, 'Quantitative prediction of phase transformations in silicon during nanoindentation', Philosophical Magazine Letters, http://dx.doi.org/10.1080/09500839.2013.798441

Feng H; Feng Q; Zhang LC; Liu Y, 2013, 'Special rotational deformation and grain size effect on fracture toughness of nanocrystalline materials', International Journal of Plasticity, 42, pp. 50 - 64, http://dx.doi.org/10.1016/j.ijplas.2012.09.015

Liu M; Ruan HH; Zhang LC, 2013, 'Variation of crystal quality and residual stresses in epitaxially grown thin film systems induced by ion implantation and annealing', Journal of Materials Research, 28, pp. 1413 - 1419, http://dx.doi.org/10.1557/jmr.2013.117

Ruan HH; Zhang LC, 2013, 'Viscosity of amorphous materials during glass-forming: more from the Adam-Gibbs Law.', Key Engineering Materials, 535-536, pp. 223 - 226, http://dx.doi.org/10.4028/www.scientific.net/KEM.535-536.223

Zhang LC; Basak AK, 2012, 'An accurate prediction of silicon phases under nanoindentation', 10th International Conference on Progress of Machining Technology, ICPMT 2012, pp. 100 - 103

Zhang LC; Basak AK, 2012, 'Plastic deformation behavior in bulk metallic glass under a cutting tip', 10th International Conference on Progress of Machining Technology, ICPMT 2012, pp. 193 - 196

Tang F; Ruan H; Zhang LC, 2012, 'A note on the reliability of nanoindentation: Effect of sample standing', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 473 - 479

Liu M; Ruan H; Zhang L, 2012, 'Origin of the implantation and annealing effects on the residual stress release in a silicon-on-sapphire system', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 466 - 472

Liu W; Ruan H; Zhang L, 2012, 'The mechanism of nano-scale shear banding in metallic glass', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 480 - 487

Gao CY; Lu W; Zhang LC; Yan HX, 2012, 'A constitutive description of the thermo-viscoplastic behaviour of body-centered cubic metals', Materials and Design, 36, pp. 671 - 678, http://dx.doi.org/10.1016/j.matdes.2011.12.012

Gu B; Zhang LC; Yuan W; Ning Y, 2012, 'A multi-scale computational method integrating finite element method with atomic interactions of materials', Computer Modelling in Engineering and Science (CMES), 88, pp. 309 - 324, http://dx.doi.org/10.3970/cmes.2012.088.309

Liu M; Ruan HH; Zhang LC, 2012, 'A new method for measuring the residual stresses in multi-layered thin film systems', Advanced Materials Research, 591-593, pp. 884 - 890, http://dx.doi.org/10.4028/www.scientific.net/AMR.591-593.884

Duan ; Zhang LC, 2012, 'A reliable method for predicting serrated chipping in high speed cutting: analysis and experimental verification', International Journal of Advanced Manufacturing Technology, online, pp. 1 - 11, http://dx.doi.org/10.1007/s00170-012-4125-0

Jin X; Zhang LC, 2012, 'A statistical model for material removal prediction in polishing', Wear, 274-275, pp. 203 - 211, http://dx.doi.org/10.1016/j.wear.2011.08.028

Duan CZ; Zhang LC, 2012, 'Adiabatic Shear Banding in AISI 1045 Steel during High Speed Machining:Mechanisms of Microstructural Evolution', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 532, pp. 111 - 119, http://dx.doi.org/10.1016/j.msea.2011.10.071

Gao CY; Liu PH; Zhang LC, 2012, 'An explicit integration algorithm for introducing user-defined thermo-viscoplastic constitutive models in FE simulations.', Materials Science Forum, 697 - 698, pp. 204 - 207, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.204

Tang F; Chen Y; Zhang LC, 2012, 'Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy', Philosophical Magazine, 92, pp. 1680 - 1690, http://dx.doi.org/10.1080/14786435.2012.657706

Cui D; Mylvaganam K; Zhang LC, 2012, 'Atomic-Scale grooving on copper: End-milling vs. Peripheral-milling', Advanced Materials Research, 565, pp. 546 - 551, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.546

Gao CY; Zhang LC, 2012, 'Constitutive modelling of plasticity of fcc metals under extremely high strain rates', International Journal of Plasticity, 32-33, pp. 121 - 133, http://dx.doi.org/10.1016/j.ijplas.2011.12.001

Bao R; Zhang LC; Li HF, 2012, 'Cutting effectiveness in machining a spherical surface', International Journal of Advanced Manufacturing Technology, pp. 1 - 10, http://dx.doi.org/10.1007/s00170-012-4339-1

Mylvaganam K; Zhang LC, 2012, 'Effect of bct-5 Si on the Indentation of Nanocrystalline Silicon', Applied Mechanics and Materials, 117 - 119, pp. 666 - 669, http://dx.doi.org/10.4028/www.scientific.net/AMM.117-119.666

Liu M; Ruan HH; Zhang LC; Moridi A, 2012, 'Effects of misfit dislocation and film-thickness on the residual stresses in epitaxial thin film systems: Experimental analysis and modeling', Journal of Materials Research, 27, pp. 2737 - 2746, http://dx.doi.org/10.1557/jmr.2012.304

Xu W; Zhang LC; Wu YB, 2012, 'Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRP Composites', Advanced Materials Research, 591-593, pp. 531 - 534, http://dx.doi.org/10.4028/www.scientific.net/AMR.591-593.531

Nguyen T; Zhang LC, 2012, 'Prediction of the Hardened Layer in Traverse Cylindrical Grinding-hardening', Materials Science Forum, 697-698, pp. 13 - 18, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.13

Tang CY; Zhang LC; Mylvaganam K, 2012, 'Rate dependent deformation of a silicon nanowire under uniaxial compression: Yielding, buckling and constitutive description', Computational Materials Science, 51, pp. 117 - 121, http://dx.doi.org/10.1016/j.commatsci.2011.07.037

Chen Y; Zhang LC; Tang F, 2012, 'Surface integrity of PCD composites generated by dynamic friction polishing: Effect of processing conditions', Diamond and Related Materials, 26, pp. 25 - 31, http://dx.doi.org/10.1016/j.diamond.2012.04.002

Zhang LC; Wei JQ; Xie HL; Qi F; He Y; Xu CS, 2011, 'Measurement of nozzle geometry with X-ray phase contrast imaging technique', Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 29, pp. 364 - 369

Mylvaganam K; Zhang LC, 2011, 'Micro/nano tribology', , pp. 121 - 160, http://dx.doi.org/10.1533/9780857091444

Ruan H; Zhang LC, 2011, 'A Monte-Carlo approach for modeling glass transition', Journal of the American Ceramic Society, 94, pp. 3350 - 3358, http://dx.doi.org/10.1111/j.1551-2916.2011.04784.x

Gao CY; Zhang LC; Yan HX, 2011, 'A new constitutive model for HCP metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 528, pp. 4445 - 4452, http://dx.doi.org/10.1016/j.msea.2011.02.053

Ruan HH; Zhang LC; Lu J, 2011, 'A new constitutive model for shear banding instability in metallic glass', International Journal of Solids and Structures, 48, pp. 3112 - 3127, http://dx.doi.org/10.1016/j.ijsolstr.2011.07.004

Rezaiee-pajand MR; Kadkhodayan M; Alamatian J; Zhang LC, 2011, 'A new method of fictitious viscous damping determination for the dynamic relaxation Method', Computers and Structures, 89, pp. 783 - 794, http://dx.doi.org/10.1016/j.compstruc.2011.02.002

Nguyen T; Zhang LC, 2011, 'A Note on Two Cooling Methods in Surface Grinding', Advanced Materials Research, 328-330, pp. 5 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.328-330.5

Gu Y; Wang W; Zhang LC; Feng X, 2011, 'An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields', Engineering Fracture Mechanics, 78, pp. 175 - 190, http://dx.doi.org/10.1016/j.engfracmech.2010.10.014

Duan CZ; Zhang LC; Yu HY; Wang MJ, 2011, 'An investigation into the microstructure of adiabatic shear banding in AISI 1045 hardened steel due to high speed machining', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 154-155, pp. 321 - 324, http://dx.doi.org/10.4028/www.scientific.net/AMR.154-155.321

Jin X; Zhang LC, 2011, 'An investigation on the chemical effect in chemo-mechanical polishing', Advanced Materials Research, 325, pp. 451 - 456, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.451

Zhang LC, 2011, 'Australia can learn from the lessons in China', Focus, Aug 11, pp. 23 - 26

Wang Y; Zhang LC; Biddut AQ, 2011, 'Chemical effect on the material removal rate in the CMP of silicon wafers', Wear, 270, pp. 312 - 316, http://dx.doi.org/10.1016/j.wear.2010.11.006

Duan CZ; Zhang LC; Li H; Wang M, 2011, 'Ductile Fracture due to Adiabatic Shear during the Serrated Chip Formation in High Speed Cutting: A Microscopic Investigation', Key Engineering Materials, 467-469, pp. 181 - 185, http://dx.doi.org/10.4028/www.scientific.net/KEM.467-469.181

Bao R; Zhang LC; Yao Q; Lunn L, 2011, 'Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point-Attack Pick', Rock Mechanics and Rock Engineering, 44, pp. 339 - 347, http://dx.doi.org/10.1007/s00603-010-0133-2

Zhang LC, 2011, 'Fabrication, Characterisation and Application of Carbon Nanotube Polymer Composites', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 139-141, pp. 1 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.139-141.1

Back to profile page