By Scientia Professor Veena Sahajwalla

Journal articles

Sahajwalla VH; Kong CH; Lu L, 2001, 'Quantitative X-ray diffraction Analysis and its Application to various Coals', Carbon, pp. 1821 - 1833

Lu LM; Sahajwalla V; Harris D, 2000, 'Characterization of chars prepared from various pulverized coals at different temperatures using drop-tube furnace (vol 4, pg 869, 2000)', ENERGY & FUELS, 14, pp. 1125 - 1125, http://dx.doi.org/10.1021/ef0001033

Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla V; Ostrovski O, 2000, 'Effect of different parameters on wettability of graphite by CaO-SiO2-Al2O3-FeO-MgO slag', Transactions of the Indian Institute of Metals, 53, pp. 479 - 486

Sahajwalla V; Kong CH; Chaubal PC; Valia HS, 2000, 'Determination of proportions of coal char and coke fines in the offgas blast furnace samples', Iron and Steelmaker (I and SM), 27, pp. 69 - 72

Sahajwalla VH; Khanna R, 2000, 'A Monte Carlo Simulation Study of Dissolution of Graphite in Iron-Carbon Melts,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 10, pp. 1517 - 1525

Lu LS; Sahajwalla VH; Harris D, 2000, 'Characteristics of Chars prepared from various Pulverised Coals at different temperatures using drop-tube furnace,', Energy and Fuels, 14, pp. 869 - 876

Sahajwalla VH; Khanna R, 2000, 'Dissolution Behavior of Particulate Graphite in Fe-C Melts: A Monte Carlo Simulation Study,', Scandinavian Journal of Metallurgy, pp. 114 - 120

Wu C; Sahajwalla VH, 2000, 'Dissolution Rates of Coals and Graphite in Fe-C-S melts in Direct Ironmaking: Dependence of Carbon Dissolution Rate on Carbon Structure - Communication,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 215 - 216

Wu C; Sahajwalla VH, 2000, 'Dissolution Rates of Coals and Graphite in Fe-C-S melts in Direct Ironmaking: Influence of Melt Carbon and Sulfur on Carbon Dissolution,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 243 - 251

Wu C; Wiblen RJ; Sahajwalla VH, 2000, 'Influence of Ash on Mass Transfer and Interfacial Reaction between Natural Graphite and Liquid Iron,', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 1099 - 1104

Mehta AS; Sahajwalla VH, 2000, 'Influence of Composition of Slag and Carbonaceous Materials on the Wettability at Slag/Carbon Interface During Pulverised Coal Injection in a Blast Furnace,', Scandinavian Journal of Metallurgy, pp. 17 - 29

Gao K; Sahajwalla VH; Sun H; Wheatley C; Dry R, 2000, 'Influence of Sulfur content and Temperature on the Carbon Boil and CO generation in Fe-C-S drops,', ISIJ International, pp. 301 - 308

Mckay JV; Archer RD; Sahajwalla VH; Young DJ; Honeyands T, 2000, 'Reoxidation of Hot Briquetted Iron in Salt Water', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 1133 - 1135

Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla VH; Ostrovski O, 2000, 'Slag/Graphite Wettability and Reaction Kinetics: Part 1: Kinetics and Mechanism of the molten FeO Reduction Reaction,', Ironmaking and Steelmaking, pp. 367 - 372

Siddiqi N; Bhoi B; Paramguru RK; Sahajwalla VH; Ostrovski O, 2000, 'Slag/Graphite Wettability and Reaction Kinetics: Part 2: Wettability influenced by Reduction Kinetics,', Ironmaking and Steelmaking, pp. 437 - 441

Zhao L; Baoyin ; Na W; Sahajwalla VH; Pehlke RD, 2000, 'The Rheological Properties and Hot Tearing Behaviour of an Al-Cu Alloy,', International Journal of Cast Metals Research, 13, pp. 167 - 174

Zhou A; Suzuki K; Sahajwalla VH; Cadogan JM, 1999, 'A Mossbauer study of the gas based direct reduction of iron ore fines and application of the Johnson-Mehl-Avrami kinetic model to the reduction process', Scandinavian Journal of Metallurgy, pp. 65 - 69

Sahajwalla VH; Khanna R, 1999, 'Influence of Sulphur on the Solubility of Graphite in Iron Melts: A Monte Carlo Simulation Study,', ACTA Materialia, pp. 793 - 800

Khanna R; Sahajwalla VH, 1999, 'Interaction Parameters for Monte Carlo Simulation of the Graphite/Fe-C Interface: a Phase Transition Study,', Scripta Materialia, 40, pp. 1289 - 1294, http://dx.doi.org/10.1016/S1359-6462(99)00073-1

Sun H; Gao K; Sahajwalla VH; Mori K; Pehlke RD, 1999, 'Kinetics of Gas Oxidation of Liquid Fe-C-S Alloys and Carbon Boil Phenomenon,', ISIJ International, pp. 1125 - 1133

Khanna R; Sahajwalla VH, 1999, 'Monte Carlo Simulation of Phenomena occurring at the Solid Graphite/Fe-C Melt Interface,', Physica Status Solidi B - Basic Solid State Physics, 213, pp. 47 - 58, http://dx.doi.org/10.1002/(SICI)1521-3951(199905)213:1<47::AID-PSSB47>3.0.CO;2-R

Sun H; Mori K; Sahajwalla VH; Pehlke RD, 1998, 'Carbon solution in Liquid iron and iron alloys', Journal of High Temperature Materials and Processes, 17, pp. 257 - 270

Chung UC; Lee IK; Kim H; Sahajwalla VH; Chung W, 1998, 'Degradation characteristics of iron ore fines of a wide size distribution in fluidized bed reduction', ISIJ International, pp. 943 - 952

Khanna SK; Wu C; Sahajwalla VH, 1998, 'Estimation of critical particle engulfment velocity in metallurgical melts', Journal of High Temperature Materials and Processes, 17, pp. 193 - 201

Zhao L; Sahajwalla VH; Pehlke RD, 1998, 'Estimation of dynamic boundary conditions by combining experimental measurements with similitude theory', International Journal of Cast Metals Research, 11, pp. 63 - 69, http://dx.doi.org/10.1080/13640461.1998.11819259

Wu C; Sahajwalla VH, 1998, 'Influence of melt carbon and sulfur on the wetting of solid graphite by Fe-C-S melts', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, pp. 471 - 477

Mehta AS; Gopalakrishna V; Sahajwalla VH, 1998, 'Squeeze casting- an alternative to forging', Metal Casting and Surface Finishing, pp. 12 - 17

Wu C; Sahajwalla VH; Pehlke RD, 1997, 'Wettability of Graphite Mould Coating by Iron and Steel: Mould/Metal Interfacial Phenomena', AFS Transactions, 105, pp. 739 - 744, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000075514100099&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Zhao L; Sahajwalla VH; Pehlke RD, 1997, 'An Engineering Approach to Dynamic Boundary Conditions in Numerical Simulation of Casting Solidification Processes', International Journal of Cast Metals Research, 10, pp. 125 - 129, http://dx.doi.org/10.1080/13640461.1997.11819227

Cadogan JM; Suzuki K; Sahajwalla VH; Wexler D; Inoue A; Masumoto T, 1997, 'Magnetic Force Microscopy Study of Nanocrystalline Fe19Zr7B2', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, pp. 586 - 589

Suzuki K; Wexler D; Cadogan JM; Sahajwalla VH; Inoue A; Masumaoto T, 1997, 'Magnetic force microscopy study of Nanocrystalline Fe91Zr7B2 soft magnetic alloy', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 226-228, pp. 554 - 558

Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumaoto T, 1997, 'On the Nanostructural formation process in Fe-M-B (M=Zr or Nb) soft magnetic alloys', Materials Science Forum, 235-238, pp. 765 - 770

Mehta AS; Gopalakrishna V; Chatterji B; Sahajwalla VH, 1997, 'Squeeze Casting of an Al-Si-Mg Alloy', Metal Casting and Surface Finishing, pp. 30 - 35

Suzuki K; Cadogan JM; Sahajwalla VH; Inoue A; Masumoto T, 1997, 'The Role of Alloying Elements in Cu-free Nanocrystalline Fe-Nb-B soft magnetic alloys', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 226-228, pp. 586 - 589

Siddiqi N; Sahajwalla VH; Ostrovski O; Belton GR, 1997, 'Wettability of graphite by CaO-SiO2-Al2O3-FeO-MgO slag', Journal of High Temperature Materials and Processes, 16, pp. 213 - 225

Suzuki K; Cadogan JM; Sahajwalla V; Inoue A; Masumoto T, 1996, 'Mössbauer study of amorphous and nanocrystalline Fe-Nb-B alloys', Materials Science Forum, 225-227, pp. 707 - 712

Sahajwalla VH; Gao K, 1996, 'Determination of atomic structual dimensions of carbonaceous materials for their utilisation in the metallurgical industries', Metal Casting and Surface Finishing, pp. 16 - 23

Wu C; Sahajwalla VH; Krauklis P, 1996, 'The effect of Austenitizing Process on the hardening behaviour of Cr-Mo-Mn-C air-hardening cast tool steel', ISIJ International, pp. 347 - 353

Wu C; Sahajwalla VH; Krauklis P, 1995, 'The effect of heat treatment processing on hardness reduction of Cr-Mo-Mn-C air-hardening cast tool steel', Metal Casting and Surface Finishing, pp. 32 - 35

Suzuki K; Cadogan JM; Dunlop JB; Sahajwalla VH, 1995, 'Two-stage nano-structural formation process in Fe-Nb-B soft magnetic alloys', Applied Physics Letters, pp. 1369 - 1371

Suzuki K; Cadogan JM; Dunlop JB; Sahajwalla VH, 1995, 'Two-stage nano-structural formation process in Fe-Nb-B soft magnetic alloys', Journal of Applied Physics, pp. 1369 - 1371

Sahajwalla V; Castillejos AH; Brimacombe JK, 1990, 'The spout of air jets upwardly injected into a water bath', Metallurgical Transactions B, 21, pp. 71 - 80, http://dx.doi.org/10.1007/BF02658117

Sahajwalla V; Brimacombe JK; Salcudean ME, 1989, 'Factors influencing the process efficiency of Gas-stirred ladles', Ironmaking and Steelmaking, 16, pp. 39 - 42

Back to profile page