By Associate Professor Rukmi Dutta

Conference Papers

Chong L; Dutta R; Rahman MF, 2013, 'Performance comparison between concentrated and distributed wound IPM machines used for field weakening applications', in International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2011 and Electromotion 2011 Joint Conference, pp. 616 - 619, http://www.scopus.com/inward/record.url?eid=2-s2.0-84876469803&partnerID=40&md5=4375d536dbc27815151271b5a67b0bac

Alshibani S; Agelidis VG; Dutta R, 2012, 'Application of particle swarm optimization in the design of large permanent magnet synchronous generators for wind turbines', in 2012 IEEE International Conference on Power and Energy (PECon), IEEE, Kota Kinabalu, Malaysia, pp. 162 - 167, presented at 2012 IEEE International Conference on Power and Energy (PECon), Kota Kinabalu, Malaysia, 02 December 2012 - 05 December 2012, http://dx.doi.org/10.1109/PECon.2012.6450198

Ahsanullah K; Dutta R; Rahman MF, 2012, 'Review of PM Generator Designs for Direct-Drive Wind Turbines', in AUPEC 2012, IEEE, USA, pp. 1 - 6, presented at 2012 22nd Australasian Universities Power Engineering Conference (AUPEC), Bali, Indonesia, 26 September 2012 - 29 September 2012, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6360197

Nguyen D; Dutta R; Rahman MF, 2012, 'Sensorless direct torque control of a fractional-slot concentrated winding interior permanent magnet synchronous machine using extended rotor flux model', in 2012 IEEE Symposium on Sensorless Control for Electrical Drives (SLED), IEEE, Milwaukee, WI, USA, pp. 1 - 6, presented at 2012 IEEE Symposium on Sensorless Control for Electrical Drives (SLED), Milwaukee, WI, USA, 21 September 2012 - 22 September 2012, http://dx.doi.org/10.1109/SLED.2012.6422805

Alshibani S; Dutta R; Agelidis VG, 2012, 'An investigation of the use of a Halbach array in MW level permanent magnet synchronous generators', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 59 - 65, presented at 2012 XXth International Conference on Electrical Machines (ICEM), Marseille, France, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349840

Dai N; Dutta R; Rahman MF, 2012, 'Comparative performance analysis of field-oriented control and direct torque control for a fractional-slot concentrated winding interior permanent magnet synchronous machine', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, pp. 879 - 885, presented at 2012 20th International Conference on Electrical Machines, ICEM 2012, Marseille, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349980

Alshibani S; Dutta R; Agelidis VG, 2012, 'Flux density analysis of using Halbach array in MW level permanent magnet synchronous generators for wind turbines: A preliminary linear mode', in 2012 20th International Conference on Electrical Machines, ICEM 2012, IEEE, Marseille, France, pp. 274 - 280, presented at 2012 20th International Conference on Electrical Machines, ICEM 2012, Marseille, France, 02 September 2012 - 05 September 2012, http://dx.doi.org/10.1109/ICElMach.2012.6349877

Nguyen D; Dutta R; Rahman MF, 2012, 'The preliminary results on Direct Torque Control for an fractional-slot concentrated winding Interior Permanent Magnet Synchronous Machine', in Conference Proceedings - 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012, IEEE Computer Society, Washington, DC, United States, pp. 1020 - 1026, presented at 2012 IEEE 7th International Power Electronics and Motion Control Conference - ECCE Asia, IPEMC 2012, Harbin, 02 June 2012 - 05 June 2012, http://dx.doi.org/10.1109/IPEMC.2012.6258941

Yang MT; Liao K; Welstand R; Teng C; Sy W; Chen Y; Dutta R; Chidambaram P; Han M; Du Y; Yeap G, 2011, 'RF and mixed-signal performances of a low cost 28nm low-power CMOS technology for wireless system-on-chip applications', in Digest of Technical Papers - Symposium on VLSI Technology, pp. 40 - 41

Chong GL; Dutta R; Xiao D; Rahman MF; Lovatt H, 2011, 'Experimental verification of open circuit parameters of an IPM machine with concentrated windings', in 2011 International Conference on Electrical Machines and Systems, ICEMS 2011, IEEE, Piscataway, NJ, United States, pp. 1 - 4, presented at International Conference on Electrical Machines and Systems (ICEMS), 2011, Beijing, China, 20 August 2011 - 23 August 2011, http://dx.doi.org/10.1109/ICEMS.2011.6073365

Xu Z; Dutta R; Yin GX; Xu DX, 2011, 'Optimal stator-current trajectory control of an IPM synchronous machine for hybrid electric vehicles', IEEE, Jeju, South Korea, pp. 1958 - 1963, presented at Power Electronics and ECCE Asia (ICPE & ECCE), 2011 IEEE 8th International Conference on, Jeju, South Korea, 30 May 2011 - 03 June 2011, http://dx.doi.org/10.1109/ICPE.2011.5944443

Dutta R; Chong GL; Rahman MF, 2011, 'Analysis of CPSR in motoring and generating modes of an IPM motor', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 1474 - 1479, presented at 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, Niagara Falls, ON, Canada, 15 May 2011 - 18 May 2011, http://dx.doi.org/10.1109/IEMDC.2011.5994826

Chong GL; Dutta R; Rahman MF; Lovatt H, 2011, 'Experimental verification of core and magnet losses in a concentrated wound IPM machine with V-shaped magnets used in field weakening applications', in 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, IEEE Computer Society, Piscataway, NJ, USA, pp. 977 - 982, presented at 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011, Niagara Falls, ON, Canada, 15 May 2011 - 18 May 2011, http://dx.doi.org/10.1109/IEMDC.2011.5994949

Chong GL; Dutta R; Rahman MF; Nguyen QD; Lovatt H, 2010, 'Comparison of Concentrated and Distributed Windings in an IPM Machine for Field Weakening Applications', in 2010 20th Australasian Universities Power Engineering Conference (AUPEC 2010), IEEE, Piscataway, NJ, USA, pp. 1 - 5, presented at Australasian Universities Power Engineering Conference (AUPEC), Christchurch, New Zealand, 05 December 2010 - 08 December 2010

Chong GL; Dutta R; Rahman MF, 2010, 'Field Weakening Performance of a Concentrated Wound PM Machine with Rotor and Magnet Geometry Variation', in Proceedings of general meeting of Power and Energy Society (PES),, IEEE, Minneapolis, USA, pp. 1 - 4, presented at Power and Energy Society General Meeting, 2010 IEEE, Minneapolis, MN, 25 July 2010 - 29 July 2010, http://dx.doi.org/10.1109/PES.2010.5589868

Chong GL; Dutta R; Rahman MF, 2010, 'Design of a Highly Efficient 1kW IPM Machine with a Very Wide Constant Power Speed Range', in Proceedings of International Power Electronics Conference -ECCE-Asia (IPEC),, IEEE, Japan, pp. 1956 - 1961, presented at International Power Electronics Conference -ECCE-Asia (IPEC), Japan, 21 June 2010 - 24 June 2010, http://ieeexplore.ieee.org/Xplore/dynhome.jsp

Chong GL; Dutta R; Rahman MF, 2010, 'A Comparative Study of Rotor Losses in an IPM with Single and Double Layer Concentrated Windings', in Proceedings of International Conference on Electrical Machines and Systems (ICEMS), IEEE, Korea, pp. 942 - 946, presented at International Conference on Electrical Machines and Systems (ICEMS), Korea

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Thermal Considerations of an Interior Permanent Magnet Machine with Conctrated Windings', in Electrical Machines and Systems, 2009. ICEMS 2009. International Conference on, IEEE, Tokyo, presented at 12th IEEE International Conference on Electrical Machines and Systems, Tokyo, 15 November 2009 - 18 November 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design and Mechanical Consideration of an IPM Machine with Concentrated Windings', in AUPEC'09 - 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems, IEEE, Adelaide, presented at AUPEC 2009, Adelaide, 27 September 2009 - 30 September 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of IPM machine with Concentrated Windings for Vehicular Applications', in EPE 2009 Barcelona, IEEE, Barcelona, Spain, presented at European Power Engineering Conference, Barcelona, Spain, 08 September 2009 - 10 September 2009

Rahman MF; Chong GL; Dutta RD, 2009, 'Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications', in Design of an Interior Permanent Magnet Machine with Concentrated Winding for Field Waekening Applications, IEEE, Miami, presented at International Electrical Machines and Drives Conference, Miami, 03 May 2009 - 06 May 2009

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-slot Cencentrated Windings, Part I : Open-circuit Analysis', in Australasian Universities Power Engineering Conference (AUPEC 2008), Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Parameter Analysis of an IPM Machine with Fractional-Slot Concentrated Windings, Part II: Including Armature Reaction', in Australasian Universities Power Engineering Conference (AUPEC 2008), The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, presented at The Australian Universities Power Engineering Conference, AUPEC2008, Sydney Australia, 04 December 2008 - 07 December 2008

Chong L; Dutta R; Rahman MF, 2008, 'Open circuit analysis of concentrated winding in interior permanent magnet machines with fractional slot distribution', in IET Conference Publications, pp. 235 - 239, http://dx.doi.org/10.1049/cp:20080518

Dutta RD, 2008, 'Effect of Rotor Magnet Segmentational of the Constant-Power Speed Range of an IPM Machine for Traction Application', in ICEMS 2008 International perference on Electrical Machines & Systems, ICEMS 2008 International perference on Electrical Machines & Systems, China, presented at ICEMS 2008 International perference on Electrical Machines & Systems, China, 17 October 2008 - 20 October 2008

Chong GL; Dutta RD; Rahman MF, 2008, 'Open-circuit analysis of concentrated winding in interior permanent magnet machines', in UKACC International Conference on Control 1998, 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, presented at 4th IET Conference on Power Electronics, Machines and Drives, York St.Johns University York, UK, 02 April 2008 - 04 April 2008

Rahman MF; Dutta RD; Chong GL, 2007, 'Application of concentrated windings in interior permanent magnet machine', in Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, presented at Australasian Universities Power Engineering Conference (AUPEC 2007), Perth, WA, 09 December 2007 - 12 December 2007

Dutta RD; Sayeef SM; Rahman MF, 2007, 'Analysis of cogging torque and its effect on direct torque control (DTC) in a segmented interior permanent magnet machine', in IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, presented at IEEE 38th Annual Power Electronics Specialists Conference, Florida, USA, 17 June 2007 - 21 June 2007

Dutta RD; Sayeef SM; Rahman MF, 2007, 'Cogging torque analysis of a segmented interior permanent magnet machine', in International Electric Machines and Drives Conference, Antalya, Turkey, presented at International Electric Machines and Drives Conference 2007, Antalya, Turkey, 03 May 2007 - 05 May 2007

Rahman MF; Dutta RD, 2006, 'Experimental verification of a segmented magnet interior permanent magnet machine (IPM) with wide constant power speed range (CPSR)', in Australasian Universities Power Engineering Conference (AUPEC 2006), Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, presented at Australasian Universities Power Engineering Conference (AUPEC 2006), Melbourne, 10 December 2006 - 13 December 2006

Rahman MF; Dutta RD, 2006, 'Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range', in 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, presented at 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 07 November 2006 - 10 November 2006

Dutta RD; Rahman MF, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine and Its Control', in 2nd National Power Electronics Conference, 2nd National Power Electronics Conference, Calcutta, India, presented at 2nd National Power Electronics Conference, Calcutta, India, 22 December 2005 - 24 December 2005

Dutta RD; Rahman MF, 2005, 'Comparison of Core Loss Prediction Methods for the Interior Permanent Magnet Machine', in Rumzi N; Indris N (ed.), 2005 International Conference on Power Electronics and Drive Systems (PEDS 2005), IEEE, Kuala Lumpur, Malayasia, pp. 1396 - 1401, presented at International Conference on Power Electronics and Drive Systems 2005, Kuala Lumpur, Malayasia, 28 November 2005 - 01 December 2005

Dutta RD; Rahman MF, 2005, 'Effect of Iron Loss on the Performance of Interior Permanent Magnet Machines', in Australasian Universities Power Engineering Conference (AUPEC 2005), Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, presented at Australasian Universities Power Engineering Conference (AUPEC 2005), Hobart, 25 September 2005 - 28 September 2005

Dutta RD; Rahman MF, 2005, 'A Segmented Magnet Interior Permanent Magnet Machine with Wide Constant Power Range for Traction Application in Hybrid Vehicles', in IEEE Vehicle Power and Propulsion Conference (VPPC 2005), Chicago Illinois USA, presented at IEEE Vehicle Power and Propulsion Conference (VPPC`05), Chicago Illinois USA, 07 September 2005 - 09 September 2005

Dutta RD; Rahman MF, 2005, 'Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines', in IEEE International Electric Machines and Drives Conference 2005, San Antonio, Texas, presented at IEEE International Electric Machines and Drives Conference 2005, San Antonio, Texas, 15 May 2005 - 18 May 2005

Dutta RD; Rahman MF, 2004, 'Investigation of suitable vector control techniques for low voltage IPM machine in 42V system', in Annual conference of IEEE industrial electronics society (IECON 2004), Busan, South Korea, presented at Annual conference of IEEE industrial electronics society (IECON 2004), Busan, South Korea, 02 November 2004 - 06 November 2004

Dutta RD; Rahman MF, 2004, 'A novel IPM machine for integrated starter alternator application', in Australasian Universities Power Engineering Conference (AUPEC 2004), Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, presented at Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, 26 September 2004 - 29 September 2004

Dutta RD; Rahman MF, 2004, 'The vector control techniques for low voltage IPM machine in 42V sytem', in Australasian Universities Power Engineering Conference (AUPEC 2004), Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, presented at Australasian Universities Power Engineering Conference (AUPEC 2004), University of Queensland, 26 September 2004 - 29 September 2004

Rahman F; Dutta R, 2003, 'A New Rotor Design of Interior Permanent Magnet machine suitable for wide speed range', in IECON Proceedings (Industrial Electronics Conference), pp. 699 - 704, http://dx.doi.org/10.1109/IECON.2003.1280067

Rahman MF; Dutta RD, 2003, 'An Investigation of a Segmented Rotor Interior PM Machine for Field Weakening', in 2003 International Conference on Power Electronics and Drive Systems, Singapore, presented at International Conference on Power Electronics and Drive Systems 2003, Singapore, 17 November 2003 - 20 November 2003

Rahman MF; Dutta RD, 2003, 'A New Rotor Design of IPM Machine Suitable for Wide-Speed Range', in Australasian Universities Power Engineering Conference (AUPEC 2003), Australasian Universities Power Engineering Conference (AUPEC 2003), University of Canterbury, Christchurch, NZ, presented at Australasian Universities Power Engineering Conference (AUPEC 2003), University of Canterbury, Christchurch, NZ, 28 September 2003 - 01 October 2003

Media

Dutta R, 2023, The fastest electric motor ever is another step towards a sustainable future, Sci-Comm Consulting Ltd, , http://dx.doi.org/10.33424/futurum357

Back to profile page