By Emeritus Professor Bob Randall

Journal articles

Shahriar MR; Borghesani P; Randall RB; Tan ACC, 2017, 'An assessment of envelope-based demodulation in case of proximity of carrier and modulation frequencies', Mechanical Systems and Signal Processing, 96, pp. 176 - 200, http://dx.doi.org/10.1016/j.ymssp.2017.04.020

Haneef MD; Randall RB; Smith WA; Peng Z, 2017, 'Vibration and Wear Based Analysis of IC Engine Bearings by Numerical Simulation', Wear, http://dx.doi.org/10.1016/j.wear.2017.04.018

Randall RB, 2016, 'Vibration-based diagnostics of gearboxes under variable speed and load conditions', Meccanica, 51, pp. 3227 - 3239, http://dx.doi.org/10.1007/s11012-016-0583-z

Haneef MD; Randall RB; Peng Z, 2016, 'Wear profile prediction of IC engine bearings by dynamic simulation', Wear, 364-365, pp. 84 - 102, http://dx.doi.org/10.1016/j.wear.2016.07.006

Chen J; Randall RB, 2016, 'Intelligent diagnosis of bearing knock faults in internal combustion engines using vibration simulation', Mechanism and Machine Theory, 104, pp. 161 - 176, http://dx.doi.org/10.1016/j.mechmachtheory.2016.05.022

Chen J; Randall RB; Peeters B, 2016, 'Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signals', Mechanical Systems and Signal Processing, 75, pp. 434 - 454, http://dx.doi.org/10.1016/j.ymssp.2015.12.023

Smith WA; Fan Z; Peng Z; Li HUAIZHONG; Randall R, 2016, 'Optimised Spectral Kurtosis for bearing diagnostics under electromagnetic interference', Mechanical Systems and Signal Processing, 75, pp. 371 - 394, http://dx.doi.org/10.1016/j.ymssp.2015.12.034

Randall RB; Coats MD; Smith WA, 2016, 'Repressing the effects of variable speed harmonic orders in operational modal analysis', Mechanical Systems and Signal Processing, 79, pp. 3 - 15, http://dx.doi.org/10.1016/j.ymssp.2016.02.042

Smith WA; Randall RB, 2016, 'Cepstrum-based operational modal analysis revisited: A discussion on pole-zero models and the regeneration of frequency response functions', Mechanical Systems and Signal Processing, 79, pp. 30 - 46, http://dx.doi.org/10.1016/j.ymssp.2016.02.030

Hu C; Smith WA; Randall RB; Peng Z, 2016, 'Development of a gear vibration indicator and its application in gear wear monitoring', Mechanical Systems and Signal Processing, http://dx.doi.org/10.1016/j.ymssp.2016.01.018

Chen J; Bond Randall R; Randall B, 2015, 'Improved automated diagnosis of misfire in internal combustion engines based on simulation models', Mechanical Systems and Signal Processing, 64-65, pp. 58 - 83, http://dx.doi.org/10.1016/j.ymssp.2015.02.027

Ruber K; Kanapathipillai K; Randall RB, 2015, 'Sound Transmission Loss of a Panel Backed by a Small Enclosure', Journal of Low Frequency Noise Vibration and Active Control, 34, pp. 549 - 567, http://dx.doi.org/10.1260/0263-0923.34.4.549

Huynh L; Foster S; Valipour H; Randall R, 2015, 'High strength and reactive powder concrete columns subjected to impact: Experimental investigation', Construction and Building Materials, 78, pp. 153 - 171, http://dx.doi.org/10.1016/j.conbuildmat.2015.01.026

Smith WA; Randall RB, 2015, 'Rolling element bearing diagnostics using the Case Western Reserve University data: a benchmark study', Mechanical Systems and Signal Processing, 64, pp. 100 - 131, http://dx.doi.org/10.1016/j.ymssp.2015.04.021

Chen J; Randall R; Feng N; Peeters B; Van Der Auweraer H, 2014, 'Modelling and diagnosis of big-end bearing knock fault in internal combustion engines', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, pp. 2973 - 2984, http://dx.doi.org/10.1177/0954406214524743

Ruber K; Kanapathipillai S; Randall R, 2014, 'Sound Transmission Loss of Panel Backed by a Small Enclosure', Journal of Low Frequency Noise Vibration and Active Control, http://multi-science.metapress.com/content/121510/?sortorder=asc

Dackermann U; Smith WA; Randall RB, 2014, 'Damage identification based on response-only measurements using cepstrum analysis and artificial neural networks', Structural Health Monitoring, 13, pp. 430 - 444, http://dx.doi.org/10.1177/1475921714542890

Chen J; Bond Randall R, 2014, 'Improved automated diagnosis of misfire in internal combustion engines based on simulation models', Mechanical Systems and Signal Processing, http://dx.doi.org/10.1016/j.ymssp.2015.02.027

Rémond D; Antoni J; Randall RB, 2014, 'Instantaneous Angular Speed (IAS) processing and related angular applications', Mechanical Systems and Signal Processing, 45, pp. 24 - 27, http://dx.doi.org/10.1016/j.ymssp.2013.10.015

Rémond D; Antoni J; Randall RB, 2014, 'Editorial for the special issue on Instantaneous Angular Speed (IAS) processing and angular applications', Mechanical Systems and Signal Processing, 44, pp. 1 - 4, http://dx.doi.org/10.1016/j.ymssp.2013.11.006

Coats MD; Randall RB, 2014, 'Single and multi-stage phase demodulation based order-tracking', Mechanical Systems and Signal Processing, 44, pp. 86 - 117, http://dx.doi.org/10.1016/j.ymssp.2013.09.016

Sawalhi N; Randall RB, 2014, 'Gear parameter identification in a wind turbine gearbox using vibration signals', Mechanical Systems and Signal Processing, 42, pp. 368 - 376, http://dx.doi.org/10.1016/j.ymssp.2013.08.017

Sawalhi N; Randall RB; Forrester D, 2014, 'Separation and enhancement of gear and bearing signals for the diagnosis of wind turbine transmission systems', Wind Energy, 17, pp. 729 - 743, http://dx.doi.org/10.1002/we.1671

Chen J; Randall R; Feng N; Peeters B; Van Der Auweraer H, 2013, 'Automated diagnosis system for mechanical faults in IC engines', 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013, 2, pp. 892 - 903

Borghesani P; Pennacchi P; Randall RB; Sawalhi N; Ricci R, 2013, 'Application of cepstrum pre-whitening for the diagnosis of bearing faults under variable speed conditions', Mechanical Systems and Signal Processing, 36, pp. 370 - 384, http://dx.doi.org/10.1016/j.ymssp.2012.11.001

Forbes G; Randall RB, 2013, 'Estimation of Turbine Blade Natural Frequencies from Casing Pressure and Vibration Measurements', Mechanical Systems and Signal Processing, 36, pp. 549 - 561, http://dx.doi.org/10.1016/j.ymssp.2012.11.006

Coats MD; Randall RB, 2012, 'Order-Tracking with and without a tacho signal for gear fault diagnostics', Australian Acoustical Society Conference 2012, Acoustics 2012: Acoustics, Development, and the Environment, pp. 447 - 454

Deshpande L; Randall RB; Sawalhi N, 2012, 'Improved simulation of bearing faults using a Finite Element Model reduction technique', 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, 2, pp. 816 - 826

Chen J; Randall RB; Peeters B; Desmet W; Van Der Auweraer HD, 2012, 'Artificial neural network based fault diagnosis of IC engines', Key Engineering Materials, 518, pp. 47 - 56, http://dx.doi.org/10.4028/www.scientific.net/KEM.518.47

Chen J; Randall RB; Peeters B; Van Der Auweraer HD; Desmet W, 2012, 'Automated misfire diagnosis in engines using torsional vibration and block rotation', Journal of Physics: Conference series, 364, pp. 1 - 12, http://dx.doi.org/10.1088/1742-6596/364/1/012020

Alshroof O; Forbes GL; Sawalhi N; Randall RB; Yeoh GH, 2012, 'Computational Fluid Dynamic Analysis of a Vibrating Turbine Blade', International Journal of Rotating Machinery, 2012, pp. 1 - 15, http://www.hindawi.com/journals/ijrm/2012/246031/

Deshpande L; Sawalhi N; Randall RB, 2012, 'Gearbox bearing fault simulation using a finite element model reduction technique.', Journal of Physics: Conference series, 364, pp. 1 - 12, http://dx.doi.org/10.1088/1742-6596/364/1/012082

Borghesani P; Pennacchi P; Randall RB; Ricci R, 2012, 'Order tracking for discrete-random separation in variable speed conditions', Mechanical Systems and Signal Processing, 30, pp. 1 - 22, http://dx.doi.org/10.1016/j.ymssp.2012.01.015

Deshpande L; Sawalhi N; Randall RB, 2011, 'Gearbox fault simulation using finite element model reduction technique', Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 322 - 328

Randall RB; Sawalhi N; Coats M, 2011, 'A comparison of methods for separation of deterministic and random signals', The International Journal of Condition Monitoring, 1, pp. 11 - 19

Randall RB; Sawalhi N, 2011, 'A new method for separating discrete components from a signal', Sound and Vibration, 45, pp. 6 - 9

Urbanek J; Barszcz T; Sawalhi N; Randall RB, 2011, 'Comparison of amplitude-based and phase-based methods for speed tracking in application to wind turbines', Metrology and Measuring Systems, 18, pp. 295 - 304, http://www.metrology.pg.gda.pl/full/2011/M&MS_2011_295.pdf

Forbes GL; Alshroof O; Randall RB, 2011, 'Fluid-structure interaction study of gas turbine blade vibrations', Australian Journal of Mechanical Engineering, 8, pp. 143 - 150, http://search.informit.com.au/documentSummary;dn=506383555307988;res=IELENG

Deshpande L; Sawalhi N; Randall RB, 2011, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', Australian Journal of Mechanical Engineering, 8, pp. 91 - 101, http://search.informit.com.au/documentSummary;dn=505917731026532;res=IELENG

Randall RB; Antoni J, 2011, 'Rolling element bearing diagnostics-A tutorial', Mechanical Systems and Signal Processing, 25, pp. 485 - 520, http://dx.doi.org/10.1016/j.ymssp.2010.07.017

Sawalhi N; Randall RB, 2011, 'Vibration response of spalled rolling element bearings: Observations, simulations and signal processing techniques to track the spall size', Mechanical Systems and Signal Processing, 25, pp. 846 - 870, http://dx.doi.org/10.1016/j.ymssp.2010.09.009

Randall RB, 2010, 'Cepstrum analysis for machine diagnostics and operational modal analysis - A tutorial', Technical Program for the MFPT 2010 Conference - Transition: From R and D to Product

Sawalhi N; Randall RB, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, 2, pp. 1278 - 1284

Sawalhi N; Randall RB, 2010, 'Improved simulations for fault size estimation in rolling element bearings', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 656 - 667

Coats MD; Randall RB, 2010, 'Single record order-tracking', 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010, 1, pp. 47 - 58

Desbazeille M; Randall RB; Guillet F; El Badaoui M; Hoisnard C, 2010, 'Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft', Mechanical Systems and Signal Processing, 24, pp. 1529 - 1541, http://dx.doi.org/10.1016/j.ymssp.2009.12.004

Liu X; Cardoso J-F; Randall RB, 2010, 'Very fast blind source separation by signal to noise ratio based stopping threshold for the SHIBBS/SJAD algorithm', Mechanical Systems and Signal Processing, 24, pp. 2096 - 2103, http://dx.doi.org/10.1016/j.ymssp.2010.03.009

Vass J; Randall RB; Kara S; Kaebernick H, 2010, 'Vibration-based approach to lifetime prediction of electric motors for reuse', International Journal of Sustainable Manufacturing, 2, pp. 2 - 29, http://dx.doi.org/10.1504/IJSM.2010.031618

Forbes GL; Randall RB, 2009, 'Gas turbine casing vibrations under blade pressure excitation', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Randall RB, 2009, 'New signal processing techniques for advanced machine diagnostics and prognostics', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Back to profile page