By Emeritus Professor Bob Randall

Journal articles

Randall RB, 2009, 'Rolling element bearing diagnostics - A tutorial', Failure Prevention: Implementation, Success Stories and Lessons Learned - Proceedings of the 2009 Conference of the Society for Machinery Failure Prevention Technology

Randall RB, 2009, 'The application of fault simulation to machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 8, pp. 5042 - 5055

Randall RB, 2009, 'The present state and future developments in machine diagnostics and prognostics', 16th International Congress on Sound and Vibration 2009, ICSV 2009, 7, pp. 4101 - 4108

Yokohama H; Randall RB, 2009, 'Investigation of road surface roughness effect on tread rubber friction with FEA', SAE Technical Papers, http://dx.doi.org/10.4271/2009-01-0067

Barszcz T; Randall RB, 2009, 'Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine', Mechanical Systems and Signal Processing, 23, pp. 1352 - 1365

Endo H; Randall RB; Gosselin C, 2009, 'Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation', Mechanical Systems and Signal Processing, 23, pp. 636 - 651

Zhang Y; Randall RB, 2009, 'Rolling element bearing fault diagnosis based on the combination of genetic algorithms and fast kurtogram', Mechanical Systems and Signal Processing, 23, pp. 1509 - 1517, http://dx.doi.org/10.1016/j.ymssp.2009.02.003

Randall RB, 2009, 'The Application of Fault Simulation to Machine Diagnostics and Prognostics', International Journal of Acoustics and Vibration, 14, pp. 81 - 89

Hanson DJ; Winton M; Randall RB; Ford RA; Thompson DJ; Waters T; Antoni JE, 2008, 'An in-service dynamic model of a diesel railcar from operational modal analysis and finite-element model updating', Proceedings of the Institution of Mechanical Engineers Part F - Journal of Rail and Rapid Transit, 222, pp. 313 - 320

Vass J; Smid R; Randall RB; Sovka P; Cristalli C; Torcianti B, 2008, 'Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: Application to mechanical fault diagnostics', Mechanical Systems and Signal Processing, 22, pp. 647 - 671, http://dx.doi.org/10.1016/j.ymssp.2007.08.008

Liu X; Randall RB; Antoni JE, 2008, 'Blind separation of internal combustion engine vibration signals by a deflation method', Mechanical Systems and Signal Processing, 22, pp. 1082 - 1091, http://dx.doi.org/10.1016/j.ymssp.2007.11.011

Sawalhi N; Randall RB, 2008, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Australian Journal of Mechanical Engineering, 5, pp. 157 - 168

Hanson D; Randall RB; Brown G; Emslie R, 2008, 'Locating leaks in underground water pipes using the complex cepstrum', Australian Journal of Mechanical Engineering, 6, pp. 107 - 112

Forbes GL; Randall RB, 2008, 'Resonance phenomena of an elastic ring under a moving load', Journal of Sound and Vibration, 318, pp. 991 - 1004

Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1924 - 1951, http://dx.doi.org/10.1016/j.ymssp.2007.12.001

Sawalhi N; Randall RB, 2008, 'Simulating gear and bearing interactions in the presence of faults. Part II: Simulation of the vibrations produced by extended bearing faults', Mechanical Systems and Signal Processing, 22, pp. 1952 - 1966, http://dx.doi.org/10.1016/j.ymssp.2007.12.002

Yokohama H; Hall SD; Randall RB, 2007, 'Experimental and theoretical studies of rubber properties; The application to tyre tread rubber', SAE Technical Papers, http://dx.doi.org/10.4271/2007-01-1527

Antoni J; Hanson DJ; Randall RB, 2007, 'Combining cyclostationarity and the frequency domain subspace technique for operational modal analysis.', Key Engineering Materials, 347, pp. 473 - 478

Hanson DJ; Randall RB; Antoni J; Thompson DJ; Waters T; Ford RA, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of mimo systems - Part 1: modal parameter identification.', Mechanical Systems and Signal Processing, 21, pp. 2441 - 2458

Hanson DJ; Randall RB; Antoni J; Waters T; Thompson DJ; Ford RA, 2007, 'Cyclostationarity and the cepstrum for operational modal analysis of momo systems - Part II: obtaining scaled mode shapes through finite element model updating.', Mechanical Systems and Signal Processing, 21, pp. 2459 - 2473

Endo H; Randall RB, 2007, 'Enhancement of autoregressive model based gear tooth fault detection technique by the use of minimum entropy deconvolution filter', Mechanical Systems and Signal Processing, 21, pp. 906 - 919

Sawalhi N; Randall RB; Endo H, 2007, 'The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis.', Mechanical Systems and Signal Processing, 21, pp. 2616 - 2633

Hanson DJ; Waters T; Thompson DJ; Randall RB; Ford RA, 2007, 'The role of anti-resonance frequencies from operational modal analysis in finite element model updating', Mechanical Systems and Signal Processing, 21, pp. 74 - 97, http://dx.doi.org/10.1016/j.ymssp.2006.01.001

Hanson D; Randall RB; Antoni J; Umlauff M; McDonald J; Ford RAJ, 2006, 'Operational modal analysis of the saker race car with engine as excitation', 13th International Congress on Sound and Vibration 2006, ICSV 2006, 3, pp. 1898 - 1905

Sawalhi N; Randall RB, 2006, 'Helicopter gearbox bearing blind fault identification using a range of analysis techniques', Proceedings of the 1st World Congress on Engineering Asset Management, WCEAM 2006, pp. 724 - 737, http://dx.doi.org/10.1007/978-1-84628-814-2_77

Randall RB; Antoni J, 2006, 'The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines', Mechanical Systems and Signal Processing, 20, pp. 308 - 331

Hanson D; Randall RB; Ford RAJ; Antoni J; Thompson DJ; Waters TP, 2005, 'Blind system identification using cyclostationarity and the complex cepstrum', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 1, pp. 447 - 450, http://dx.doi.org/10.1109/ISSPA.2005.1580292

Liu X; Randall RB, 2005, 'Redundant data elimination in independent component analysis', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 1, pp. 29 - 32, http://dx.doi.org/10.1109/ISSPA.2005.1580188

Sawalhi N; Randall RB, 2005, 'Spectral kurtosis optimization for rolling element bearings', Proceedings - 8th International Symposium on Signal Processing and its Applications, ISSPA 2005, 2, pp. 839 - 842, http://dx.doi.org/10.1109/ISSPA.2005.1581069

Liu X; Randall RB, 2005, 'Blind source separation of internal combustion engine piston slap from other measured vibration signals', Mechanical Systems and Signal Processing, 19, pp. 1196 - 1208, http://www.sciencedirect.com/science/article/B6WN1-4H5DYB0-2/2/b3176615ff0442b4e05234e600083b7e

Bonnardot F; Randall RB; Guillet F, 2005, 'Extraction of second-order cyclostationary sources--Application to vibration analysis', Mechanical Systems and Signal Processing, 19, pp. 1230 - 1244, http://www.sciencedirect.com/science/article/B6WN1-4H4T32Y-2/2/f00c1879bddf15fb9ee300d818c1561c

Antoni J; Randall RB, 2005, 'On the use of the cyclic power spectrum in rolling element bearings diagnostics', Journal of Sound and Vibration, 281, pp. 463 - 468

Bonnardot F; El Badaoui M; Randall RB; Daniere J; Guillet F, 2005, 'Use of the acceleration signal of a gearbox in order to perform angular resampling (with limited speed fluctuation)', Mechanical Systems and Signal Processing, 19, pp. 766 - 785

Endo H; Randall RB; Gosselin C, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region', Journal of Failure Analysis and Prevention, 4, pp. 63 - 71, http://dx.doi.org/10.1361/15477020420792

Randall RB, 2004, 'Detection and diagnosis of incipient bearing failure in helicopter gearboxes', Engineering Failure Analysis, 11, pp. 177 - 190

Endo H; Randall RB; Gosselin C, 2004, 'Differential diagnosis of spall versus cracks in the gear tooth fillet region.', Journal of Failure Analysis and Prevention, 4, pp. 57 - 65

Bonnardot F; Randall RB; Antoni J, 2004, 'Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis', International Journal of Acoustics and Vibration, 9, pp. 51 - 60

Randall RB, 2004, 'State of the art in monitoring rotating machinery - Part 1', Sound and Vibration, 38, pp. 14 - 21

Randall RB, 2004, 'State of the art in monitoring rotating machinery - Part 2', Sound and Vibration, 38, pp. 10 - 17

Antoni JE; Randall RB, 2004, 'Unsupervised noise cancellation for vibration signals: part 1 - evaluation of adaptive algorithms', Mechanical Systems and Signal Processing, 18, pp. 89 - 101

Antoni JE; Randall RB, 2004, 'Unsupervised noise cancellation for vibration signals: part II - a novel frequency-domain algorithm', Mechanical Systems and Signal Processing, 18, pp. 103 - 117

Antoni JE; Randall RB, 2003, 'A stochastic model for simulation and diagnostics of rolling element bearings with localized faults', Journal of Vibration and Acoustics - Transactions of the ASME, 125, pp. 282 - 289

Antoni J; Daniere J; Guillet F; Randall RB, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', JOURNAL OF SOUND AND VIBRATION, 257, pp. 839 - 856, http://dx.doi.org/10.1006/jsvi.2002.5063

Antoni J; Daniere J; Guillet F; Randall RB, 2002, 'Effective vibration analysis of IC engines using cyclostationarity. Part II - New results on the reconstruction of the cylinder pressures', Journal of Sound and Vibration, 257, pp. 839 - 856, http://dx.doi.org/10.1006/jsvi.2002.5063

Antoni JE; Randall RB, 2002, 'Differential diagnosis of gear and bearing faults', Journal of Vibration and Acoustics - Transactions of the ASME, 124(2), pp. 165 - 171

Randall RB, 2001, 'Editorial for special edition on gear and bearing diagnostics', Mechanical Systems and Signal Processing, 15, pp. 827 - 829

Randall RB; Antoni JE; Chobsaard S, 2001, 'The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals.', Mechanical Systems and Signal Processing, 15, pp. 945 - 962

Randall RB; Gao Y, 2000, 'A simulation model for training neural networks to recognise bearing faults', Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA, pp. 247 - 254

Hosseini MM; Kerr RM; Randall RB, 2000, 'An inspection model with minimal and major maintenance for a system with deterioration and Poisson failures', IEEE TRANSACTIONS ON RELIABILITY, 49, pp. 88 - 98, http://dx.doi.org/10.1109/24.855541

Ho D; Randall RB, 2000, 'Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals', Mechanical Systems and Signal Processing, 14, pp. 763 - 788

Back to profile page