ORCID as entered in ROS
https://orcid.org/0000-0003-4042-1566
Select Publications
Conference Papers
, 2012, 'Inertial property estimation by the modal model method', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 2071 - 2080, presented at
, 2012, 'New cepstral methods of signal pre-processing for operational modal analysis', in Sas P; Moens D; Jonckheere S (eds.), Proceedings of ISMA2012 - International Conference on Noise and Vibration Engineeering, KU Leuven, Leuven, Belgium, pp. 755 - 764, presented at
, 2012, 'Compensating for speed variation by order tracking with and without a tacho signal', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 727 - 738, presented at
, 2012, 'Neural network based diagnosis of mechanical faults in IC engines', in 10th International Conference on Vibrations in Rotating Machinery, IMechE, London, UK, pp. 679 - 690, presented at
, 2012, 'Improved simulation of bearing faults using a finite element model reduction technique', in The 9th Intnl Conf on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Co (for BINDT), UK, pp. 1 - 11, presented at
, 2012, 'Separation of Gear and Bearing Fault Signals from a Wind Turbine Transmission under Varying Speed and Load', in Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2012, Springer, Berlin Heidelberg, pp. 3 - 12, presented at
, 2012, 'Updated cepstral methods for operational modal analysis', Jacksonville, FL, pp. 201 - 209, presented at
, 2012, 'Automated diagnosis of piston slap in engines', in 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012, pp. 1145 - 1155
, 2012, 'The Origin of ACAM by Bob Randall and Raphael Grzebieta', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 9 - 11
, 2011, 'Investigations of a tuned vibration absorber with high damping for increasing acoustic panels sound transmission loss in low frequency range', in Australian Acoustical SocietyConference 2011, Acoustics 2011: Breaking New Ground, pp. 158 - 164
, 2011, 'Gearbox Fault Simulation using a Finite Element Model Reduction Technique', in Proceedings of Acoustics 2011, The Australian Acoustical Society, Darlinghurst NSW, pp. 1 - 7, presented at
, 2011, 'A vibration signal based simulation model for the misfire of internal combustion engines.', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 659 - 671, presented at
, 2011, 'Cepstrum Editing (Liftering) to Remove Discrete Frequency Signals leaving a Signal Dominated by Structural Response Effects- and Enhance Fault Detection In Rolling Element Bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 132 - 143, presented at
, 2011, 'Dynamic simulation of a gearbox system in the presence of bearing faults using finite element model reduction techniques', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 878 - 889, presented at
, 2011, 'Signal pre-whitening for fault detection enhancement and surveillance in rolling element bearings', in Condition Monitoring and Machinery Failure Prevention Technologies. International Conference. 8th 2011, British Institute of Non-destructive Testing (BINDT), UK, pp. 549 - 561, presented at
, 2011, 'Signal Pre-whitening using Cepstrum Editing (Liftering) to enhance Fault Detection in Rolling Element Bearings', in COMADEM 2011, COMADEM International, UK, pp. 1 - 7, presented at
, 2011, 'Decomposition of structural vibration for wind turbine diagnosis', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at
, 2011, 'Editing time signals using the real cepstrum', in Technical Program for MFPT: The Applied Systems Health Management Conference 2011: Enabling Sustainable Systems, Machine Failure Prevention Technology Society (MFPT), Dayton, OH, presented at
, 2011, 'Improved simulations of faults in gearboxes for diagnostic and prognostic purposes using a reduced finite element model of the casing', in Fourteenth Australian Aeronautical Conference, Royal Aeronautical Society (Australian Divison) / Engineers Australia, Australia, pp. 1 - 14, presented at
, 2011, 'Fault simulation in a gearbox using finite element model reduction techniques', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Springer, USA, pp. 399 - 410, presented at
, 2011, 'Use of the cepstrum to remove selected discrete frequency components from a time signal', in Proulx T (ed.), Conference Proceedings of the Society for Experimental Mechanics Series, Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Vol. 5, Springer, New York, USA, pp. 451 - 461, presented at
, 2011, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', in IUTAM Bookseries, pp. 429 - 440, http://dx.doi.org/10.1007/978-94-007-0020-8_36
, 2010, 'Gas turbine blade vibration and casing wall pressure interaction', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 9, presented at
, 2010, 'Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 10, presented at
, 2010, 'Comparison of amplitude based and phase based methods for speed tracking in application to wind turbines', Krakow, presented at
, 2010, 'Simulation of the vibration generated by entry and exit to/from a spall in a rolling element bearing', in Proceedings of 20th International Congress on Acoustics ICA 2010, Australian Acoustical Society, Sydney, pp. 1 - 7, presented at
, 2010, 'Improved simulations for fault size estimation in rolling element bearings', in The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, Coxmoor Publishing Company, England, pp. 1 - 12, presented at
, 2010, 'Signal decomposition for symptom enhancement: A journey from Fourier analysis through time/frequency analysis to blind source separation', in Proceedings of ISMA 2010 - International Conference on Noise and Vibration Engineering, including USD 2010, pp. 15 - 34
, 2009, 'Extraction of Tacho Information from a Vibration Signal for Improved Synchronous Averaging', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at
, 2009, 'Simulation of Gas Turbine blade vibration measurement from unsteady casing wall pressure', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at
, 2009, 'System Identification with Mean Differential Cepstrum using Random Decrement', in Proceedings of Acoustics 2009: Research to Consulting, Australian Acoustical Society, Australia, presented at
, 2009, 'The use of simulation models to generate data corresponding to faults in machines.', in The Proceedings of 2009 8th International Conference on Reliability, Maintainability and Safety, Chengdu, China, Chengdu, China, 20 July 2009 - 24 July 2009, http://dx.doi.org/10.1109/ICRMS.2009.5269971
, 2009, 'The application of fault simulation to machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at
, 2009, 'The present state and future developments in machine diagnostics and prognostics', in Pawelczyk M; Bismor D (ed.), Proceedings of the 16th International Congress on Sound and Vibration (ICSV16), Polish Acoustical Society, Poland, pp. 1 - 14, presented at
, 2009, 'Fault detection and localization of a large diesel engine by analyzing the instantaneous crankshaft angular speed', Dublin, presented at
, 2009, 'Tracking of spall size in rolling element bearings', Dublin, presented at
, 2009, 'Signal processing techniques for bearing fault size determination', in 22nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Fundaci n TEKNIKER, San Sebastian, Spain, presented at
, 2009, 'Signal processing tools for tracking the size of a spall in a rolling element bearing', DELHI, presented at
, 2009, 'Effects of limiting the bandwidth of the vibration signal on bearing fault detection and diagnosis using state of the art techniques', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at
, 2009, 'Gas Turbine Casing Response to Blade Vibrations: Analytical and Experimental results', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at
, 2008, 'Novel signal processing techniques to aid bearing prognostics', in IEEE (ed.), First International Conference on Prognostics and Health Management, Denver, Colorado, USA, pp. 1 - 8, presented at
, 2008, 'Diagnosis of milling cutting tools from the excitation identified using cepstral analysis and second order cyclic statistics', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, pp. 751 - 764, presented at
, 2008, 'New cepstral methods of operational modal analysis', in Sas P; Bergan B (ed.), Proceedings of ISMA2008 - International Conference on Noise and Vibration Engineeering, Leuven, Belgium, pp. 2535 - 2548, presented at
, 2008, 'Detection of rolling element bearing faults by analysis of the motor current', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 573 - 582, presented at
, 2008, 'Improved simulation of faults in rolling element bearings in gear boxes', in University of Exeter (ed.), Ninth International Conference on Vibrations in Rotating Machinery, Exeter, United Kingdom, pp. 539 - 548, presented at
, 2008, 'Localised fault diagnosis in rolling element bearings in gearboxes', in The Fifth International Conference on Condition Monitoring & Machinery Failure Prevention Technologies, Edinburgh, United Kingdom, presented at
, 2008, 'Separation of excitation forces from simulated gas turbine casing response measurements', in 7th European Conference on Structural Dynamics - EURODYN 2008, Southampton, United Kingdom, presented at
, 2008, 'Optimal rib stiffening for noise reduction of constant speed gearboxes', in Ahn T; Jeon JY; Han J-H; Hong S-Y; Kim K-J; Song O (eds.), 15th International Congress on Sound and Vibration, Daejeon, Korea, pp. 2339 - 2346, presented at
, 2008, 'Detection of a Blade Fault from Simulated Gas Turbine Casing Response Measurements', in PROCEEDINGS OF THE FOURTH EUROPEAN WORKSHOP ON STRUCTURAL HEALTHMONITORING 2008, Kracow, Poland, pp. 882 - 889, presented at
, 2008, 'A combined lumped mass parameter and finite element model of a single stage gearbod for bearing fault simulation', in Svoboda V (ed.), 21st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, Prague, Czech Republic, pp. 1 - 6, presented at
Filter by type
https://orcid.org/0000-0003-4042-1566