By Professor Gangadhara Prusty

Journal articles

Thadathil Varghese J; Islam F; Farrar P; Prusty BG, 2025, 'Optimising dental restorative composites: Numerical and statistical analysis of polymerization shrinkage and elastic modulus effects', Journal of the Mechanical Behavior of Biomedical Materials, 167, http://dx.doi.org/10.1016/j.jmbbm.2025.106981

Hiew A; Pun CL; Abrahams R; Maung PT; Prusty BG; Yan W, 2025, 'Cyclic plastic deformation and damage initiation of laser-cladded flange tip lift crossings in tramlines', Engineering Failure Analysis, 173, http://dx.doi.org/10.1016/j.engfailanal.2025.109440

Thadathil Varghese J; Raju ; Farrar P; Prusty BG, 2025, 'Fibre-reinforced dental composites: Influence of aspect ratio and loading percentage on material performance', Dental Materials, 41, pp. 561 - 574, http://dx.doi.org/10.1016/j.dental.2025.03.001

Shafaq S; Donough MJ; Farnsworth AL; Phillips AW; Chirima G; St John NA; Ben Arber B; Murphy K; Prusty G, 2025, 'On the ply-wise investigation of the crystalline morphology distribution of in-situ consolidated CF/PEEK composite using Wide-Angle X-ray scattering (WAXS)', Composites Part A: Applied Science and Manufacturing, 192, http://dx.doi.org/10.1016/j.compositesa.2025.108792

Mittal S; Pearce H; Yampolskiy M; Oromiehie E; Prusty BG, 2025, 'On cyber sabotage risks in automated manufacturing of advanced composites', Additive Manufacturing Letters, 13, http://dx.doi.org/10.1016/j.addlet.2025.100280

Islam F; Donough MJ; Oromiehie E; Phillips AW; St John NA; Prusty BG, 2025, 'Data-driven optimization of additive composite manufacturing using automated fibre placement: A study on process parameters effects and interactions', Composites Part A: Applied Science and Manufacturing, 190, http://dx.doi.org/10.1016/j.compositesa.2024.108599

Hiew A; Maung PT; Prusty BG; Lai Q; Pun CL; Abrahams R; Yan W, 2025, 'Ratcheting behaviour of Stellite 21 as laser cladding material for flange tip lift crossings repair', International Journal of Fatigue, 192, http://dx.doi.org/10.1016/j.ijfatigue.2024.108726

Donough MJ; Shafaq S; Sommacal S; Chirima G; Ibrahim M; St. John NA; Prusty BG, 2025, 'Evaluating the effectiveness of fusion bond repairs on impact damaged thermoplastic composites', Polymer Composites, http://dx.doi.org/10.1002/pc.29489

Shafaq S; Donough MJ; Bhandari B; Phillips AW; St John NA; Prusty BG, 2025, 'Experimental study on the influence of optimised automated fibre placement processing parameters on the impact response and residual flexural strength of AS4/APC-2 laminates', Composites Science and Technology, 259, http://dx.doi.org/10.1016/j.compscitech.2024.110945

Chan RSM; Lee SJ; Wang F; Zhou T; Kishan R; Shum HC; Yang W; Su YX; Tsoi JKH; Diwan AD; Prusty BG; Cho K, 2025, 'Engineered 3D-Printable Nanohydroxyapatite Biocomposites with Cold Plasma-Tailored Surface Features to Boost Osseointegration', ACS Applied Materials and Interfaces, http://dx.doi.org/10.1021/acsami.4c22032

Air A; Oromiehie E; Prusty BG, 2025, 'Optimisation of a composite pressure vessel dome using non-geodesic tow paths and automated fibre placement manufacturing', Composites Part B: Engineering, 288, http://dx.doi.org/10.1016/j.compositesb.2024.111906

Shafaq S; Donough MJ; Oromiehie E; Islam F; Phillips AW; St John NA; Prusty BG, 2024, 'Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness', Journal of Composite Materials, 58, pp. 2879 - 2895, http://dx.doi.org/10.1177/00219983241283598

Caldwell RL; Davies P; Arhant M; Prusty BG, 2024, 'Compression and hydrothermal ageing after impact of carbon fibre reinforced epoxy laminates', Composites Part A: Applied Science and Manufacturing, 184, http://dx.doi.org/10.1016/j.compositesa.2024.108258

Oromiehie E; Nagulapally P; Donough MJ; Prusty BG, 2024, 'Automated manufacture and experimentation of composite overwrapped pressure vessel with embedded optical sensor', International Journal of Hydrogen Energy, 79, pp. 1215 - 1226, http://dx.doi.org/10.1016/j.ijhydene.2024.06.364

Thadathil Varghese J; Raju R; Farrar P; Prentice L; Prusty BG, 2024, 'Comparative analysis of self-cure and dual cure-dental composites on their physico-mechanical behaviour', Australian Dental Journal, 69, pp. 124 - 138, http://dx.doi.org/10.1111/adj.13004

Bhandari B; Maung PT; Prusty GB, 2024, 'Novel Response Surface Technique for Composite Structure Localization Using Variable Acoustic Emission Velocity', Sensors, 24, http://dx.doi.org/10.3390/s24113450

Bhandari B; Maung PT; Oromiehie E; Prusty GB, 2024, 'Continuous Wavelet Transform and Deep Learning for Accurate AE Zone Detection in Laminated Composite Structures', IEEE Sensors Journal, 24, pp. 14007 - 14017, http://dx.doi.org/10.1109/JSEN.2024.3377607

Mukhopadhyay SC; Senn I; Ramakrishna V; George B; Prusty G; Diwan A, 2024, 'Feasibility analysis of wireless power delivery to implanted sensors of XLIF patients', International Journal on Smart Sensing and Intelligent Systems, 17, http://dx.doi.org/10.2478/ijssis-2024-0028

Jenkins CJ; Donough MJ; Prusty GB, 2024, 'Design and manufacture of mould-free fibre-reinforced laminates with compound curvature', International Journal of Advanced Manufacturing Technology, 131, pp. 1795 - 1806, http://dx.doi.org/10.1007/s00170-024-13226-2

Jenkins C; Donough MJ; Gangadhara Prusty B, 2024, 'Mould free laminated composites using eccentric fibre prestressing', Composite Structures, 331, http://dx.doi.org/10.1016/j.compstruct.2023.117867

Air A; Gangadhara Prusty B, 2024, 'Manufacturing feasibility of a bend free ellipsoidal composite pressure vessel using automated fibre placement', Composites Part A: Applied Science and Manufacturing, 177, http://dx.doi.org/10.1016/j.compositesa.2023.107968

Thadathil Varghese J; Islam F; Farrar P; Prentice L; Prusty BG, 2024, 'Multi-response optimisation analysis of material properties in dental restorative composites under the influence of thermal and thermomechanical stimuli – A 3D finite element study', Journal of the Mechanical Behavior of Biomedical Materials, 150, http://dx.doi.org/10.1016/j.jmbbm.2023.106363

Oromiehie E; Kong A; Djukic L; Mata J; Rodgers DC; Prusty GB, 2024, 'Nanostructure characterisation of welded polyethylene using small angle X-ray scattering', Journal of Reinforced Plastics and Composites, http://dx.doi.org/10.1177/07316844241242194

Bhandari B; Maung PT; Prusty GB, 2024, 'Numerical model and experimental validation of stress waves propagation in large composite panels', Journal of Reinforced Plastics and Composites, http://dx.doi.org/10.1177/07316844241272955

Raju ; Loy CW; Cho K; Farrar P; Prusty BG, 2023, 'Design and tribological performance of short S-Glass fibre reinforced biocomposites on the influence of fibre length and concentration', Scientific Reports, 13, http://dx.doi.org/10.1038/s41598-023-28645-6

Caldwell RL; Donough MJ; Phillips AW; St John NA; Prusty BG, 2023, 'Dynamic response of composite materials subjected to low velocity impacts in water: A numerical study', Composites Communications, 44, http://dx.doi.org/10.1016/j.coco.2023.101775

Oromiehie E; Nair V; Short K; Wei T; Bhattacharyya D; Prusty BG, 2023, 'Effect of He²⁺ ion irradiation on the mechanical properties of automated fibre placement (AFP) CF-PEEK thermoplastics composites', Scientific Reports, 13, http://dx.doi.org/10.1038/s41598-023-45742-8

Babaei B; Prusty BG, 2023, 'Enhancing the mechanical stability of restored teeth with interfacial cracks: Finite element analysis', Journal of the Mechanical Behavior of Biomedical Materials, 148, http://dx.doi.org/10.1016/j.jmbbm.2023.106191

Air A; Oromiehie E; Prusty BG, 2023, 'Design and manufacture of a Type V composite pressure vessel using automated fibre placement', Composites Part B: Engineering, 266, http://dx.doi.org/10.1016/j.compositesb.2023.111027

Serubibi A; Hazell PJ; Escobedo JP; Wang H; Oromiehie E; Prusty GB; Phillips AW; St John NA, 2023, 'Fibre-metal laminate structures: High-velocity impact, penetration, and blast loading – A review', Composites Part A: Applied Science and Manufacturing, 173, http://dx.doi.org/10.1016/j.compositesa.2023.107674

Islam F; Donough MJ; Oromiehie E; Phillips AW; St John NA; Prusty BG, 2023, 'Modelling the effect of hot gas torch heating on adjacent tows during automated fibre placement consolidation of thermoplastic composites', Journal of Thermoplastic Composite Materials, 36, pp. 4211 - 4236, http://dx.doi.org/10.1177/08927057221123477

Thomas J; Gupta M; Prusty G, 2023, 'Assessing global parameters of slope stability model using Earth data observations for forecasting rainfall – induced shallow landslides', Journal of Applied Geophysics, 212, http://dx.doi.org/10.1016/j.jappgeo.2023.104994

Nagulapally P; Shamsuddoha M; Herath T; Djukic L; Prusty GB, 2023, 'Mechanical and optical performance evaluations of embedded polyimide and PEEK coated distributed optical sensors in glass fibre reinforced composites with vinyl ester resin systems', Journal of Composite Materials, 57, pp. 1707 - 1728, http://dx.doi.org/10.1177/00219983231160866

Air A; Shamsuddoha M; Oromiehie E; Prusty BG, 2023, 'Development of an automated fibre placement-based hybrid composite wheel for a solar-powered car', International Journal of Advanced Manufacturing Technology, 125, pp. 4083 - 4097, http://dx.doi.org/10.1007/s00170-023-10946-9

Thadathil Varghese J; Cho K; Raju ; Farrar P; Prentice L; Prusty BG, 2023, 'Effect of silane coupling agent and concentration on fracture toughness and water sorption behaviour of fibre-reinforced dental composites', Dental Materials, 39, pp. 362 - 371, http://dx.doi.org/10.1016/j.dental.2023.03.002

Air A; Shamsuddoha M; Gangadhara Prusty B, 2023, 'A review of Type V composite pressure vessels and automated fibre placement based manufacturing', Composites Part B: Engineering, 253, http://dx.doi.org/10.1016/j.compositesb.2023.110573

Zhao C; Donough MJ; Prusty BG; Xiao J; Zhou L; An L, 2023, 'Pseudo-ductile fracture in grid stiffened structure by automated fibre placement', Composite Structures, 308, http://dx.doi.org/10.1016/j.compstruct.2023.116694

Shafaq ; Donough MJ; Farnsworth AL; Phillips AW; St John NA; Gangadhara Prusty B, 2023, 'Influence of deposition rates on the mode I fracture toughness of in-situ consolidated thermoplastic composites', Composites Part B: Engineering, 251, http://dx.doi.org/10.1016/j.compositesb.2022.110474

Ramakrishna VAS; Chamoli U; Larosa AG; Mukhopadhyay SC; Gangadhara Prusty B; Diwan AD, 2023, 'A biomechanical comparison of posterior fixation approaches in lumbar fusion using computed tomography based lumbosacral spine modelling', Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 237, pp. 243 - 253, http://dx.doi.org/10.1177/09544119221149119

Maung PT; Prusty BG; Donough MJ; Oromiehie E; Phillips AW; St John NA, 2023, 'Automated manufacture of optimised shape-adaptive compsite hydrofoils with curvilinear fibre paths for improved bend-twist performance', Marine Structures, 87, http://dx.doi.org/10.1016/j.marstruc.2022.103327

Choi JY; Jeon JH; Lyu JH; Park J; Kim GY; Chey SY; Quan YJ; Bhandari B; Prusty BG; Ahn SH, 2023, 'Current Applications and Development of Composite Manufacturing Processes for Future Mobility', International Journal of Precision Engineering and Manufacturing - Green Technology, 10, pp. 269 - 291, http://dx.doi.org/10.1007/s40684-022-00483-3

Donough MJ; Prusty BG; Van Donselaar MJ; Morozov EV; Wang H; Hazell PJ; Philips AW; John NAS, 2023, 'In-Plane and Oblique Edge-on Impact on Thick Glass-Fibre/Epoxy Composite Laminates', International Journal of Impact Engineering, 171, http://dx.doi.org/10.1016/j.ijimpeng.2022.104373

Ramakrishna VAS; Chamoli U; Mukhopadhyay SC; Diwan AD; Prusty BG, 2023, 'Measuring compressive loads on a ‘smart’ lumbar interbody fusion cage: Proof of concept', Journal of Biomechanics, 147, http://dx.doi.org/10.1016/j.jbiomech.2023.111440

Garg N; Donough MJ; Song C; Phillips AW; Prusty BG, 2023, 'Three-dimensional scaled boundary finite element method to study interfacial imperfections in thick laminated composite plates undergoing bi-axial bending', Engineering Analysis with Boundary Elements, 146, pp. 34 - 43, http://dx.doi.org/10.1016/j.enganabound.2022.10.003

Maung PT; Prusty BG; Oromiehie E; Phillips AW; St John NA, 2022, 'Design and manufacture of a shape-adaptive full-scale composite hydrofoil using automated fibre placement', International Journal of Advanced Manufacturing Technology, 123, pp. 4093 - 4108, http://dx.doi.org/10.1007/s00170-022-10527-2

Donough MJ; Shafaq ; St John NA; Philips AW; Gangadhara Prusty B, 2022, 'Process modelling of In-situ consolidated thermoplastic composite by automated fibre placement – A review', Composites Part A: Applied Science and Manufacturing, 163, http://dx.doi.org/10.1016/j.compositesa.2022.107179

Tanulia V; Wang J; Pearce GM; Baker A; Prusty BG, 2022, 'Computational assessment of disbond growth behaviour in adhesively bonded wide joints or patch repairs for primary airframe structures', Composites Part C: Open Access, 9, http://dx.doi.org/10.1016/j.jcomc.2022.100315

Gu Y; Nguyen T; Donough MJ; Gangadhara Prusty B; Wang J, 2022, 'Mechanisms of pop-up delamination in laminated composites pierced by the initial pure waterjet in abrasive waterjet machining', Composite Structures, 297, http://dx.doi.org/10.1016/j.compstruct.2022.115968

Babaei B; Cella S; Farrar P; Prentice L; Prusty BG, 2022, 'The influence of dental restoration depth, internal cavity angle, and material properties on biomechanical resistance of a treated molar tooth', Journal of the Mechanical Behavior of Biomedical Materials, 133, http://dx.doi.org/10.1016/j.jmbbm.2022.105305

Islam F; Caldwell R; Phillips AW; John NAS; Prusty BG, 2022, 'A review of relevant impact behaviour for improved durability of marine composite propellers', Composites Part C: Open Access, 8, http://dx.doi.org/10.1016/j.jcomc.2022.100251

Back to profile page