By Professor Yansong Shen

Journal articles

Xu D; Wang S; Shen Y, 2022, 'Coarse-grained rCFD-DEM analysis of coke gasification and iron ore reduction in the shaft region of an ironmaking blast furnace', Powder Technology, 408, http://dx.doi.org/10.1016/j.powtec.2022.117706

Wang S; Shen Y, 2022, 'Particle-scale modelling of the pyrolysis of end-of-life solar panel particles in fluidized bed reactors', Resources, Conservation and Recycling, 183, http://dx.doi.org/10.1016/j.resconrec.2022.106378

Zhao Z; Yu X; Shen Y, 2022, 'Transient CFD study of wet burden charging on dynamic in-furnace phenomena in an ironmaking blast furnace: Impacts and remedies', Powder Technology, 408, http://dx.doi.org/10.1016/j.powtec.2022.117708

Yue Y; Shen Y, 2022, 'CFD-DEM study of spout incoherence phenomena in a conical spouted bed', Powder Technology, 406, http://dx.doi.org/10.1016/j.powtec.2022.117529

Li CX; Dong KJ; Liu SD; Chandratilleke GR; Zhou ZY; Shen YS, 2022, 'DEM study of particle segregation in the throat region of a blast furnace', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117660

Yu X; Li Y; Xu H; Shen Y, 2022, 'Effects of shaft angle on the performance of an ironmaking blast furnace: A CFD study', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117646

Liu Y; Shen Y, 2022, 'HMB-CFD study of oxygen-enriched pulverised coal combustion in an ironmaking blast furnace', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117610

Song S; Wang S; Le-Clech P; Shen Y, 2022, 'LBM-DEM simulation of particle deposition and resuspension of pre-deposited dynamic membrane', Powder Technology, 407, http://dx.doi.org/10.1016/j.powtec.2022.117637

Xie Z; Gu X; Shen Y, 2022, 'A Machine Learning Study of Predicting Mixing and Segregation Behaviors in a Bidisperse Solid-Liquid Fluidized Bed', Industrial and Engineering Chemistry Research, 61, pp. 8551 - 8565, http://dx.doi.org/10.1021/acs.iecr.2c00071

Wu C; Zhuo Y; Xu X; Farajzadeh E; Dou J; Yu J; Shen Y; Zhang Z, 2022, 'A combined experimental and numerical study of coal briquettes pyrolysis using recycled gas in an industrial scale pyrolyser', Powder Technology, 404, http://dx.doi.org/10.1016/j.powtec.2022.117477

Wang S; Shen Y, 2022, 'Super-quadric CFD-DEM simulation of chip-like particles flow in a fluidized bed', Chemical Engineering Science, 251, http://dx.doi.org/10.1016/j.ces.2022.117431

Wang S; Shen Y, 2022, 'Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow', International Journal of Heat and Mass Transfer, 184, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.122302

Song S; Rong L; Dong K; Liu X; Le-Clech P; Shen Y, 2022, 'Pore-scale numerical study of intrinsic permeability for fluid flow through asymmetric ceramic microfiltration membranes', Journal of Membrane Science, 642, http://dx.doi.org/10.1016/j.memsci.2021.119920

Li S; Shen Y, 2022, 'Numerical simulation of multiphase flow in a full coal-direct chemical looping combustion process', Chemical Engineering Science, 248, http://dx.doi.org/10.1016/j.ces.2021.117233

Yu X; Shen Y, 2022, 'Transient State modeling of Industry-scale ironmaking blast furnaces', Chemical Engineering Science, 248, http://dx.doi.org/10.1016/j.ces.2021.117185

Li S; Shen Y, 2022, 'An approach to simulate gas-solid flow systems with process controllers', Chemical Engineering Journal, 429, http://dx.doi.org/10.1016/j.cej.2021.132443

Jin X; Wang S; Shen Y, 2022, 'DEM study of mixing behaviours of cohesive particles in a U-shaped ribbon mixer', Powder Technology, 399, http://dx.doi.org/10.1016/j.powtec.2021.117097

Zhou H; Tian X; Guo X; Kou M; Wu S; Shen Y; You Y, 2022, 'DEM study of the angle of repose and porosity distribution of cylindrical particles with different lengths', International Journal of Chemical Reactor Engineering, 20, pp. 197 - 207, http://dx.doi.org/10.1515/ijcre-2021-0174

Hu Y; Zhou H; She X; Kou M; Wu S; Zhang Z; Shen Y, 2022, 'Numerical Simulation of Combustion Characteristics in the Dome Zone of the COREX Melter-Gasifier: The Effect of Rising Gas', Industrial and Engineering Chemistry Research, 61, pp. 931 - 941, http://dx.doi.org/10.1021/acs.iecr.1c03774

Jin X; Chandratilleke GR; Wang S; Shen Y, 2022, 'DEM investigation of mixing indices in a ribbon mixer', Particuology, 60, pp. 37 - 47, http://dx.doi.org/10.1016/j.partic.2021.03.005

Jin X; Wang S; Shen Y, 2022, 'DEM study of the effect of impeller design on mixing performance in a U-shape ribbon mixer', Advanced Powder Technology, 33, http://dx.doi.org/10.1016/j.apt.2021.10.026

Song S; Rong L; Dong K; Shen Y, 2022, 'Numerical study of the hydraulic tortuosity for fluid flow through elliptical particle packings', Powder Technology, 398, http://dx.doi.org/10.1016/j.powtec.2021.117047

Yue Y; Wang S; Shen Y, 2021, 'Exploring mechanism of spout deflection in a spout fluidized bed', Chemical Engineering Science, 245, http://dx.doi.org/10.1016/j.ces.2021.116942

Yue Y; Wang S; Shen Y, 2021, 'CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective', Powder Technology, 394, pp. 278 - 289, http://dx.doi.org/10.1016/j.powtec.2021.08.041

Cui J; Zhang Y; Hao X; Liu X; Shen Y, 2021, 'Thermodynamic calculation of S−Sb system and Cu−S−Sb system', Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 75, http://dx.doi.org/10.1016/j.calphad.2021.102362

Xie Z; Wang S; Shen Y, 2021, 'CFD-DEM study of segregation and mixing characteristics under a bi-disperse solid-liquid fluidised bed', Advanced Powder Technology, 32, pp. 4078 - 4095, http://dx.doi.org/10.1016/j.apt.2021.09.012

Chandratilleke GR; Jin X; Shen YS, 2021, 'DEM study of effects of particle size and density on mixing behaviour in a ribbon mixer', Powder Technology, 392, pp. 93 - 107, http://dx.doi.org/10.1016/j.powtec.2021.06.058

Zhou H; Xu K; Tian X; Kou M; Wu S; Shen Y, 2021, 'Influence of burden profile on gas-solid distribution in COREX shaft furnace with center gas supply by CFD-DEM model', Powder Technology, 392, pp. 672 - 679, http://dx.doi.org/10.1016/j.powtec.2021.07.039

Liu Y; Shen Y, 2021, 'Modelling and optimisation of biomass injection in ironmaking blast furnaces', Progress in Energy and Combustion Science, 87, http://dx.doi.org/10.1016/j.pecs.2021.100952

Zhou H; Tian X; Kou M; Wu S; Shen Y, 2021, 'Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM', Powder Technology, 392, pp. 317 - 324, http://dx.doi.org/10.1016/j.powtec.2021.07.019

Zhuo Y; Hu Z; Shen Y, 2021, 'CFD study of hydrogen injection through tuyeres into ironmaking blast furnaces', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.120804

Wang S; Shen Y, 2021, 'CFD-DEM modelling of raceway dynamics and coke combustion in an ironmaking blast furnace', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.121167

Yu X; Hu Z; Shen Y, 2021, 'Modeling of hydrogen shaft injection in ironmaking blast furnaces', Fuel, 302, http://dx.doi.org/10.1016/j.fuel.2021.121092

Liu Y; Hu Z; Shen Y, 2021, 'CFD Study of Hydrogen Injection in Blast Furnaces: Tuyere Co-injection of Hydrogen and Coal', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 52, pp. 2971 - 2991, http://dx.doi.org/10.1007/s11663-021-02156-z

Xiong Q; Wang J; Shen Y, 2021, 'Editorial-special issue of “advances in process intensification of fluidization”', Chemical Engineering and Processing - Process Intensification, 167, http://dx.doi.org/10.1016/j.cep.2021.108557

Li W; Zhuo Y; Bao J; Shen Y, 2021, 'A data-based soft-sensor approach to estimating raceway depth in ironmaking blast furnaces', Powder Technology, 390, pp. 529 - 538, http://dx.doi.org/10.1016/j.powtec.2021.05.072

Wang S; Shen Y, 2021, 'Particle-scale modelling of raceway dynamics in a blast furnace using a smoothing method', Powder Technology, 389, pp. 189 - 203, http://dx.doi.org/10.1016/j.powtec.2021.05.020

Yue Y; Wang S; Shen Y, 2021, 'Spout deflection in spouted beds and countermeasures: A review', Powder Technology, 389, pp. 309 - 327, http://dx.doi.org/10.1016/j.powtec.2021.05.022

Wang S; Shen Y, 2021, 'Particle-scale study of heat and mass transfer in a bubbling fluidised bed', Chemical Engineering Science, 240, http://dx.doi.org/10.1016/j.ces.2021.116655

Wong XY; Zhuo Y; Shen Y, 2021, 'Numerical Analysis of Hydrogen Bubble Behavior in a Zero-Gap Alkaline Water Electrolyzer Flow Channel', Industrial and Engineering Chemistry Research, 60, pp. 12429 - 12446, http://dx.doi.org/10.1021/acs.iecr.1c02554

Yue Y; Wang S; Bahl P; de Silva C; Shen Y, 2021, 'Experimental investigation of spout incoherence in a spouted bed', Chemical Engineering Journal, 418, http://dx.doi.org/10.1016/j.cej.2021.129320

Li S; Shen Y, 2021, 'CFD study of nonuniformity of gas-solid flow through a chemical looping combustion system with symmetrical series loops', Powder Technology, 387, pp. 108 - 124, http://dx.doi.org/10.1016/j.powtec.2021.04.008

Zhuo Y; Jung S; Shen Y, 2021, 'Numerical Study of Hydrogen Desorption in an Innovative Metal Hydride Hydrogen Storage Tank', Energy and Fuels, 35, pp. 10908 - 10917, http://dx.doi.org/10.1021/acs.energyfuels.1c00666

Zhuo Y; Xie Z; Shen Y, 2021, 'Model study of carbonisation of low rank coal briquettes: Effect of briquettes shape', Powder Technology, 385, pp. 120 - 130, http://dx.doi.org/10.1016/j.powtec.2021.02.071

Wang T; Wang S; Shen Y, 2021, 'Particle-scale study of gas-solid flows in a bubbling fluidised bed: Effect of drag force and collision models', Powder Technology, 384, pp. 353 - 367, http://dx.doi.org/10.1016/j.powtec.2021.02.034

Yue Y; Wang S; Shen Y, 2021, 'Gas-solid mixing and heat transfer performance in alternating spout deflection', Chemical Engineering Science, 234, http://dx.doi.org/10.1016/j.ces.2021.116446

Li Q; Zhuo Y; Shanks K; Taylor RA; Conneely B; Tan A; Shen Y; Scott J, 2021, 'A winged solar biomass reactor for producing 5-hydroxymethylfurfural (5-HMF)', Solar Energy, 218, pp. 455 - 468, http://dx.doi.org/10.1016/j.solener.2021.03.001

Li S; Shen Y, 2021, 'CFD investigation of maldistribution in a full-loop circulating fluidized bed with double parallel cyclones', Powder Technology, 381, pp. 665 - 684, http://dx.doi.org/10.1016/j.powtec.2020.12.020

Song S; Rong L; Dong K; Shen Y, 2021, 'Numerical investigation of drag property for fluid flow through random arrays of elliptical cylinders', Powder Technology, 380, pp. 539 - 552, http://dx.doi.org/10.1016/j.powtec.2020.11.003

Chen X; Wang C; Liu Y; Shen Y; Zheng Q; Yang S; Lu H; Zou H; Lin K; Liu H; Qiu H; Wu J; Zhang Q; Liu X, 2021, 'Popcorn-like aluminum-based powders for instant low-temperature water vapor hydrogen generation', Materials Today Energy, 19, http://dx.doi.org/10.1016/j.mtener.2020.100602

Back to profile page