By Scientia Professor Chun Hui Wang

Journal articles

Araby S; Wang CH; Wu H; Meng Q; Kuan HC; Kim NK; Mouritz A; Ma J, 2018, 'Development of flame-retarding elastomeric composites with high mechanical performance', Composites Part A: Applied Science and Manufacturing, 109, pp. 257 - 266, http://dx.doi.org/10.1016/j.compositesa.2018.03.012

Wu S; Peng S; Wang CH, 2018, 'Multifunctional polymer nanocomposites reinforced by aligned carbon nanomaterials', Polymers, 10, pp. 542, http://dx.doi.org/10.3390/polym10050542

Zhang Y; Xu X; Wang J; Chen T; Wang CH, 2018, 'Crushing analysis for novel bio-inspired hierarchical circular structures subjected to axial load', International Journal of Mechanical Sciences, 140, pp. 407 - 431, http://dx.doi.org/10.1016/j.ijmecsci.2018.03.015

Wang J; Zhang Y; He N; Wang CH, 2018, 'Crashworthiness behavior of Koch fractal structures', Materials and Design, 144, pp. 229 - 244, http://dx.doi.org/10.1016/j.matdes.2018.02.035

Hageman D; Wu S; Kilbreath S; Rockson SG; Wang C; Knothe Tate ML, 2018, 'Biotechnologies toward Mitigating, Curing, and Ultimately Preventing Edema through Compression Therapy', Trends in Biotechnology, 36, pp. 537 - 548, http://dx.doi.org/10.1016/j.tibtech.2018.02.013

Blanloeuil P; Rose LRF; Veidt M; Wang CH, 2018, 'Time reversal invariance for a nonlinear scatterer exhibiting contact acoustic nonlinearity', Journal of Sound and Vibration, 417, pp. 413 - 431, http://dx.doi.org/10.1016/j.jsv.2017.12.019

Ravindran AR; Ladani RB; Wu S; Kinloch AJ; Wang CH; Mouritz AP, 2018, 'The electric field alignment of short carbon fibres to enhance the toughness of epoxy composites', Composites Part A: Applied Science and Manufacturing, 106, pp. 11 - 23, http://dx.doi.org/10.1016/j.compositesa.2017.12.006

Peng S; Blanloeuil P; Wu S; Wang CH, 2018, '3D Printing: Rational Design of Ultrasensitive Pressure Sensors by Tailoring Microscopic Features (Adv. Mater. Interfaces 18/2018)', Advanced Materials Interfaces, 5, http://dx.doi.org/10.1002/admi.201870088

Agius D; Wallbrink C; Hu W; Kajtaz M; Wang CH; Kourousis KI, 2017, 'On the utilisation of nonlinear plasticity models in military aircraft fatigue estimation: A preliminary comparison', Aerospace Science and Technology, 71, pp. 25 - 29, http://dx.doi.org/10.1016/j.ast.2017.09.004

Ibrahim ME; Smith RA; Wang CH, 2017, 'Ultrasonic detection and sizing of compressed cracks in glass- and carbon-fibre reinforced plastic composites', NDT and E International, 92, pp. 111 - 121, http://dx.doi.org/10.1016/j.ndteint.2017.08.004

Wu S; Ladani RB; Ravindran AR; Zhang J; Mouritz AP; Kinloch AJ; Wang CH, 2017, 'Aligning carbon nanofibres in glass-fibre/epoxy composites to improve interlaminar toughness and crack-detection capability', Composites Science and Technology, 152, pp. 46 - 56, http://dx.doi.org/10.1016/j.compscitech.2017.09.007

Joosten MW; Agius S; Hilditch T; Wang C, 2017, 'Effect of residual stress on the matrix fatigue cracking of rapidly cured epoxy/anhydride composites', Composites Part A: Applied Science and Manufacturing, 101, pp. 521 - 528, http://dx.doi.org/10.1016/j.compositesa.2017.07.007

Ladani RB; Wu S; Kinloch AJ; Ghorbani K; Mouritz AP; Wang CH, 2017, 'Enhancing fatigue resistance and damage characterisation in adhesively-bonded composite joints by carbon nanofibres', Composites Science and Technology, 149, pp. 116 - 126, http://dx.doi.org/10.1016/j.compscitech.2017.06.018

Soleimanpour R; Ng CT; Wang CH, 2017, 'Higher harmonic generation of guided waves at delaminations in laminated composite beams', Structural Health Monitoring, 16, pp. 400 - 417, http://dx.doi.org/10.1177/1475921716673021

Blanloeuil P; Francis Rose LR; Veidt M; Wang CH, 2017, 'Time reversal invariance for a one-dimensional model of contact acoustic nonlinearity', Journal of Sound and Vibration, 394, pp. 515 - 526, http://dx.doi.org/10.1016/j.jsv.2017.01.050

Wu S; Zhang J; Ladani RB; Ravindran AR; Mouritz AP; Kinloch AJ; Wang CH, 2017, 'Novel Electrically Conductive Porous PDMS/Carbon Nanofiber Composites for Deformable Strain Sensors and Conductors', ACS Applied Materials and Interfaces, 9, pp. 14207 - 14215, http://dx.doi.org/10.1021/acsami.7b00847

Agius D; Kajtaz M; Kourousis KI; Wallbrink C; Wang CH; Hu W; Silva J, 2017, 'Sensitivity and optimisation of the Chaboche plasticity model parameters in strain-life fatigue predictions', Materials and Design, 118, pp. 107 - 121, http://dx.doi.org/10.1016/j.matdes.2017.01.027

Agius D; Kourousis KI; Wallbrink C; Hu W; Wang CH; Dafalias YF, 2017, 'Aluminum alloy 7075 ratcheting and plastic shakedown evaluation with the multiplicative armstrong-frederick model', AIAA Journal, 55, pp. 2461 - 2470, http://dx.doi.org/10.2514/1.J055833

Walker KF; Lourenço JM; Sun S; Brandt M; Wang CH, 2017, 'Quantitative fractography and modelling of fatigue crack propagation in high strength AerMet®100 steel repaired with a laser cladding process', International Journal of Fatigue, 94, pp. 288 - 301, http://dx.doi.org/10.1016/j.ijfatigue.2016.06.031

Ladani RB; Wu S; Zhang J; Ghorbani K; Kinloch AJ; Mouritz AP; Wang CH, 2017, 'Using Carbon Nanofibre Sensors for In-situ Detection and Monitoring of Disbonds in Bonded Composite Joints', Procedia Engineering, 188, pp. 362 - 368, http://dx.doi.org/10.1016/j.proeng.2017.04.496

Fowler CP; Orifici AC; Wang CH, 2016, 'A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage', International Journal of Hydrogen Energy, 41, pp. 22067 - 22089, http://dx.doi.org/10.1016/j.ijhydene.2016.10.039

Chan E; Rose LRF; Wang CH, 2016, 'A comparison and extensions of algorithms for quantitative imaging of laminar damage in plates. II. Non-monopole scattering and noise tolerance', Wave Motion, 66, pp. 220 - 237, http://dx.doi.org/10.1016/j.wavemoti.2016.04.004

Blanloeuil P; Rose LRF; Guinto JA; Veidt M; Wang CH, 2016, 'Closed crack imaging using time reversal method based on fundamental and second harmonic scattering', Wave Motion, 66, pp. 156 - 176, http://dx.doi.org/10.1016/j.wavemoti.2016.06.010

Agius SL; Joosten M; Trippit B; Wang CH; Hilditch T, 2016, 'Rapidly cured epoxy/anhydride composites: Effect of residual stress on laminate shear strength', Composites Part A: Applied Science and Manufacturing, 90, pp. 125 - 136, http://dx.doi.org/10.1016/j.compositesa.2016.06.013

Ravi S; Garcia JE; Wang C; Dyer AG, 2016, 'The answer is blowing in the wind: Free-flying honeybees can integrate visual and mechano-sensory inputs for making complex foraging decisions', Journal of Experimental Biology, 219, pp. 3465 - 3472, http://dx.doi.org/10.1242/jeb.142679

Ravi S; Kolomenskiy D; Engels T; Schneider K; Wang C; Sesterhenn J; Liu H, 2016, 'Bumblebees minimize control challenges by combining active and passive modes in unsteady winds', Scientific Reports, 6, pp. 35043, http://dx.doi.org/10.1038/srep35043

Araby S; Qiu A; Wang R; Zhao Z; Wang CH; Ma J, 2016, 'Aerogels based on carbon nanomaterials', Journal of Materials Science, 51, pp. 9157 - 9189, http://dx.doi.org/10.1007/s10853-016-0141-z

Wu S; Ladani RB; Zhang J; Ghorbani K; Zhang X; Mouritz AP; Kinloch AJ; Wang CH, 2016, 'Strain Sensors with Adjustable Sensitivity by Tailoring the Microstructure of Graphene Aerogel/PDMS Nanocomposites', ACS Applied Materials and Interfaces, 8, pp. 24853 - 24861, http://dx.doi.org/10.1021/acsami.6b06012

Wu S; Zhang J; Ladani RB; Ghorbani K; Mouritz AP; Kinloch AJ; Wang CH, 2016, 'A novel route for tethering graphene with iron oxide and its magnetic field alignment in polymer nanocomposites', Polymer, 97, pp. 273 - 284, http://dx.doi.org/10.1016/j.polymer.2016.05.024

Ladani RB; Ravindran AR; Wu S; Pingkarawat K; Kinloch AJ; Mouritz AP; Ritchie RO; Wang CH, 2016, 'Multi-scale toughening of fibre composites using carbon nanofibres and z-pins', Composites Science and Technology, 131, pp. 98 - 109, http://dx.doi.org/10.1016/j.compscitech.2016.06.005

Fisher A; Ravi S; Watkins S; Watmuff J; Wang C; Liu H; Petersen P, 2016, 'The gust-mitigating potential of flapping wings', Bioinspiration and Biomimetics, 11, http://dx.doi.org/10.1088/1748-3190/11/4/046010

Ahamed J; Joosten M; Callus P; Wisnom MR; Wang CH, 2016, 'Ply-overlap hybrid technique for joining dissimilar composite materials', Materials and Design, 100, pp. 157 - 167, http://dx.doi.org/10.1016/j.matdes.2016.03.112

Zhang Y; Lu M; Wang CH; Sun G; Li G, 2016, 'Out-of-plane crashworthiness of bio-inspired self-similar regular hierarchical honeycombs', Composite Structures, 144, pp. 1 - 13, http://dx.doi.org/10.1016/j.compstruct.2016.02.014

Ahamed J; Joosten M; Callus P; John S; Wang CH, 2016, 'Ply-interleaving technique for joining hybrid carbon/glass fibre composite materials', Composites Part A: Applied Science and Manufacturing, 84, pp. 134 - 146, http://dx.doi.org/10.1016/j.compositesa.2016.01.010

Lourenço JM; Sun SD; Sharp K; Luzin V; Klein AN; Wang CH; Brandt M, 2016, 'Fatigue and fracture behavior of laser clad repair of AerMet® 100 ultra-high strength steel', International Journal of Fatigue, 85, pp. 18 - 30, http://dx.doi.org/10.1016/j.ijfatigue.2015.11.021

Ladani RB; Wu S; Kinloch AJ; Ghorbani K; Zhang J; Mouritz AP; Wang CH, 2016, 'Multifunctional properties of epoxy nanocomposites reinforced by aligned nanoscale carbon', Materials and Design, 94, pp. 554 - 564, http://dx.doi.org/10.1016/j.matdes.2016.01.052

Joosten MW; Dingle M; Mouritz A; Khatibi AA; Agius S; Wang CH, 2016, 'A hybrid embedded cohesive element method for predicting matrix cracking in composites', Composite Structures, 136, pp. 554 - 565, http://dx.doi.org/10.1016/j.compstruct.2015.10.030

Walker KF; Wang CH; Newman JC, 2016, 'Closure measurement and analysis for small cracks from natural discontinuities in an aluminium alloy', International Journal of Fatigue, 82, pp. 256 - 262, http://dx.doi.org/10.1016/j.ijfatigue.2015.03.016

Kourousis KI; Agius D; Wang C; Subic A, 2016, 'Constitutive modeling of additive manufactured Ti-6Al-4V cyclic elastoplastic behaviour', Technische Mechanik, 36, pp. 57 - 72, http://dx.doi.org/10.24352/ub.ovgu-2017-010

Guinto J; Blanloeuil P; Wang CH; Rose F; Veidt M, 2016, 'Ultrasonic Imaging of a Crack Using Modified Time Reversal', Applied Mechanics and Materials, 846, pp. 553 - 558, http://dx.doi.org/10.4028/www.scientific.net/amm.846.553

Donough MJ; Gunnion AJ; Orifici AC; Wang CH, 2015, 'Scaling parameter for fatigue delamination growth in composites under varying load ratios', Composites Science and Technology, 120, pp. 39 - 48, http://dx.doi.org/10.1016/j.compscitech.2015.10.011

Rose LRF; Chan E; Wang CH, 2015, 'A comparison and extensions of algorithms for quantitative imaging of laminar damage in plates. I. Point spread functions and near field imaging', Wave Motion, 58, pp. 222 - 243, http://dx.doi.org/10.1016/j.wavemoti.2015.05.010

Ladani RB; Wu S; Kinloch AJ; Ghorbani K; Zhang J; Mouritz AP; Wang CH, 2015, 'Improving the toughness and electrical conductivity of epoxy nanocomposites by using aligned carbon nanofibres', Composites Science and Technology, 117, pp. 146 - 158, http://dx.doi.org/10.1016/j.compscitech.2015.06.006

He S; Rose LF; Wang CH, 2015, 'Inverse methods for quantitative assessment of delamination damage based on vibrational response', Structural Health Monitoring, 14, pp. 411 - 425, http://dx.doi.org/10.1177/1475921715591874

Xie YM; Li X; Yan LN; Wei B; Wang CH; Tang CW, 2015, 'The expressions of somatostatin and cycloxygenase-2 in chronic hepatitis, hepatic cirrhosis, precancerous lesion and hepatocellular carcinoma', Journal of Sichuan University (Medical Science Edition), 46, pp. 710 - 716

Wu S; Ladani RB; Zhang J; Bafekrpour E; Ghorbani K; Mouritz AP; Kinloch AJ; Wang CH, 2015, 'Aligning multilayer graphene flakes with an external electric field to improve multifunctional properties of epoxy nanocomposites', Carbon, 94, pp. 607 - 618, http://dx.doi.org/10.1016/j.carbon.2015.07.026

Wu S; Ladani RB; Zhang J; Kinloch AJ; Zhao Z; Ma J; Zhang X; Mouritz AP; Ghorbani K; Wang CH, 2015, 'Epoxy nanocomposites containing magnetite-carbon nanofibers aligned using a weak magnetic field', Polymer, 68, pp. 25 - 34, http://dx.doi.org/10.1016/j.polymer.2015.04.080

Chan E; Rose LRF; Wang CH, 2015, 'An extended diffraction tomography method for quantifying structural damage using numerical Green's functions', Ultrasonics, 59, pp. 1 - 13, http://dx.doi.org/10.1016/j.ultras.2015.01.001

Kandare E; Khatibi AA; Yoo S; Wang R; Ma J; Olivier P; Gleizes N; Wang CH, 2015, 'Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions', Composites Part A: Applied Science and Manufacturing, 69, pp. 72 - 82, http://dx.doi.org/10.1016/j.compositesa.2014.10.024

Donough MJ; Gunnion AJ; Orifici AC; Wang CH, 2015, 'Plasticity induced crack closure in adhesively bonded joints under fatigue loading', International Journal of Fatigue, 70, pp. 440 - 450, http://dx.doi.org/10.1016/j.ijfatigue.2014.07.003

Back to profile page