By Scientia Professor Chun Hui Wang

Journal articles

Wang CH; Hutchinson JW, 2001, 'Interactions of fatigue cracks with elastic obstacles', International Journal of Fracture, 109, pp. 263 - 283, http://dx.doi.org/10.1023/A:1011041612941

Zhang XP; Wang CH; Chen W; Ye L; Mai YW, 2001, 'Investigation of short fatigue cracks in nickel-based single crystal superalloy SC16 by in-situ SEM fatigue testing', Scripta Materialia, 44, pp. 2443 - 2448, http://dx.doi.org/10.1016/S1359-6462(01)00927-7

Sawyer JPG; Wang CH; Jones R, 2001, 'An implicit algorithm using explicit correctors for the kinematic hardening model with multiple back stresses', International Journal for Numerical Methods in Engineering, 50, pp. 2093 - 2107, http://dx.doi.org/10.1002/nme.111

Rose LRF; Wang CH, 2001, 'Self-similar analysis of plasticity-induced closure of small fatigue cracks', Journal of the Mechanics and Physics of Solids, 49, pp. 401 - 429, http://dx.doi.org/10.1016/S0022-5096(00)00024-7

Wang CH; Goldstraw MW, 2000, 'Plastic deformation at the tip of a tensile crack in a non-linear kinematic hardening material', International Journal of Fracture, 102

Wang CH; Rose LRF; Callinan R; Baker AA, 2000, 'Thermal stresses in a plate with a circular reinforcement', International Journal of Solids and Structures, 37, pp. 4577 - 4599, http://dx.doi.org/10.1016/S0020-7683(99)00175-4

Wang CH, 2000, 'Fatigue crack closure analysis of bridged cracks representing composite repairs', Fatigue and Fracture of Engineering Materials and Structures, 23, pp. 477 - 488, http://dx.doi.org/10.1046/j.1460-2695.2000.00318.x

Wang CH; Rose LRF, 2000, 'Compact solutions for the corner singularity in bonded lap joints', International Journal of Adhesion and Adhesives, 20, pp. 145 - 154, http://dx.doi.org/10.1016/S0143-7496(99)00032-9

Wang CH; Chalkley P, 2000, 'Plastic yielding of a film adhesive under multiaxial stresses', International Journal of Adhesion and Adhesives, 20, pp. 155 - 164, http://dx.doi.org/10.1016/S0143-7496(99)00033-0

Pang F; Hui Wang C, 2000, 'A predictive creep model for un-stitched and stitched woven composites', Composites Science and Technology, 60, pp. 255 - 261, http://dx.doi.org/10.1016/S0266-3538(99)00117-7

Wang X; Xiao K; Ye L; Mai YW; Wang CH; Rose LRF, 2000, 'Modelling mechanical properties of core-shell rubber-modified epoxies', Acta Materialia, 48, pp. 579 - 586, http://dx.doi.org/10.1016/S1359-6454(99)00342-0

Zhang XP; Wang CH; Li JC; Mai YW; Ye L, 2000, 'A combined model of short crack closure accounting for both plasticity and roughness induced crack closures', Key Engineering Materials, pp. 217 - 222

Zhang XP; Wang CH; Li JC; Mai YW; Ye L, 2000, 'Combined model of short crack closure accounting for both plasticity and roughness induced crack closures', Key Engineering Materials, 183

Pang F; Wang CH, 2000, 'Creep rupture failure of woven composites', Journal of Reinforced Plastics and Composites, 19, pp. 1201 - 1216

Wang CH; Hu W; Sawyer JPG, 2000, 'Explicit numerical integration algorithm for a class of non-linear kinematic hardening model', Computational Mechanics, 26, pp. 140 - 147, http://dx.doi.org/10.1007/s004660000161

Wang CH; Erjavec D, 2000, 'Geometrically linear analysis of the thermal stresses in one-sided composite repairs', Journal of Thermal Stresses, 23, pp. 833 - 851, http://dx.doi.org/10.1080/014957300750040104

Knop M; Jones R; Molent L; Wang C, 2000, 'On the Glinka and Neuber methods for calculating notch tip strains under cyclic load spectra', International Journal of Fatigue, 22, pp. 743 - 755, http://dx.doi.org/10.1016/S0142-1123(00)00061-X

Wang CH; Rose LRF, 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.t01-1-00209.x

Wang CH; Rose LRF, 1999, 'A crack bridging model for bonded plates subjected to tension and bending', International Journal of Solids and Structures, 36, pp. 1985 - 2014, http://dx.doi.org/10.1016/S0020-7683(98)00070-5

Guo W; Wang CH; Rose LRF, 1999, 'Influence of cross-sectional thickness on fatigue crack growth', Fatigue and Fracture of Engineering Materials and Structures, 22, pp. 437 - 444, http://dx.doi.org/10.1046/j.1460-2695.1999.00176.x

Wang CH; Guo W; Rose LRF, 1999, 'A Method for determining the elastic-plastic response ahead of a notch tip', Journal of Engineering Materials and Technology, Transactions of the ASME, 121, pp. 313 - 320, http://dx.doi.org/10.1115/1.2812380

Pang F; Wang CH, 1999, 'Activation theory for creep of woven composites', Composites Part B: Engineering, 30, pp. 613 - 620, http://dx.doi.org/10.1016/S1359-8368(99)00025-6

Liu R; Wang CH; Bathgate RG, 1999, 'Crack closure in spherical shells', International Journal of Fracture, 99, pp. 307 - 323, http://dx.doi.org/10.1023/A:1018682914979

Wang CH; Rose LRF, 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue and Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.t01-1-00209.x

Liu R; Wang CH; Bathgate RG, 1999, 'Fracture analysis of cracked Macadamia nutshells under contact load between two rigid plates', Journal of Agricultural and Engineering Research, 74, pp. 243 - 250, http://dx.doi.org/10.1006/jaer.1999.0455

Callinan RJ; Wang CH, 1999, 'On the fatigue enhancement of interference fitted stop drilled holes', International Journal of Fatigue, 21, pp. 865 - 872, http://dx.doi.org/10.1016/S0142-1123(99)00013-4

Wang ; Rose , 1999, 'Crack-tip plastic blunting under gross section yielding and implications for modelling physically short cracks', Fatigue <html_ent glyph="@amp;" ascii="&amp;"/> Fracture of Engineering Materials and Structures, 22, pp. 761 - 773, http://dx.doi.org/10.1046/j.1460-2695.1999.00209.x

Diewert WE, 1999, 'Introduction and Overview', Canadian Journal of Economics, 33, pp. 3 - 15

Wang CH; Rose LRF; Baker AA, 1998, 'Modelling of the fatigue growth behaviour of patched cracks', International Journal of Fracture, 88

Wang CH; Chao M, 1998, 'Near-tip deformation of a crack under gross section yielding', International Journal of Fracture, 90

Wang CH; Rose LRF; Callinan R, 1998, 'Analysis of out-of-plane bending in one-sided bonded repair', International Journal of Solids and Structures, 35, pp. 1653 - 1675, http://dx.doi.org/10.1016/S0020-7683(97)00129-7

Wang CH; Rose LRF, 1998, 'Bonded repair of cracks under mixed mode loading', International Journal of Solids and Structures, 35, pp. 2749 - 2773, http://dx.doi.org/10.1016/S0020-7683(97)00240-0

Wang CH, 1998, 'On the fracture of constrained layers', International Journal of Fracture, 93, pp. 227 - 246, http://dx.doi.org/10.1007/978-94-017-2854-6_12

Peng Z; Wang C; Li C; Gao Q; Wang Z; Zhang G; Zhang J; Li X; Peng J, 1998, 'Simultaneous determination of creatinine, pseudouridine and uric acid in serum and urine by high performance liquid chromatography', Se pu = Chinese journal of chromatography / Zhongguo hua xue hui, 16, pp. 146 - 148

Wang CH; Heller M; Rose LRF, 1998, 'Substrate stress concentrations in bonded lap joints', Journal of Strain Analysis for Engineering Design, 33, pp. 331 - 346, http://dx.doi.org/10.1243/0309324981513039

Wang CH; Rose LRF, 1998, 'Transient and steady-state deformation at notch root under cyclic loading', Mechanics of Materials, 30, pp. 229 - 241, http://dx.doi.org/10.1016/S0167-6636(98)00048-9

Wang CH, 1997, 'Analysis of cracks in constrained layers', International Journal of Fracture, 83, pp. 1 - 7

Pang F; Wang CH; Bathgate RG, 1997, 'Creep response of woven-fibre composites and the effect of stitching', Composites Science and Technology, 57, pp. 91 - 98, http://dx.doi.org/10.1016/S0266-3538(96)00112-1

Wang CH; Rose LRF, 1997, 'Determination of triaxial stresses in bonded joints', International Journal of Adhesion and Adhesives, 17, pp. 17 - 25, http://dx.doi.org/10.1016/S0143-7496(96)00028-0

Bathgate RG; Wang CH; Pang F, 1997, 'Effects of temperature on the creep behaviour of woven and stitched composites', Composite Structures, 38, pp. 435 - 445, http://dx.doi.org/10.1016/S0263-8223(97)00078-0

Wang CH, 1997, 'Fracture of interface cracks under combined loading', Engineering Fracture Mechanics, 56, pp. 77 - 86, http://dx.doi.org/10.1016/s0013-7944(96)00111-7

Brown MW; Suker DK; Wang CH, 1996, 'An analysis of mean stress in multiaxial random fatigue', Fatigue and Fracture of Engineering Materials and Structures, 19, pp. 323 - 333, http://dx.doi.org/10.1111/j.1460-2695.1996.tb00970.x

Wang CH, 1996, 'Effect of stress ratio on short fatigue crack growth', Journal of Engineering Materials and Technology, Transactions of the ASME, 118, pp. 362 - 366, http://dx.doi.org/10.1115/1.2806819

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 1: Theories', Journal of Engineering Materials and Technology, Transactions of the ASME, 118, pp. 367 - 370, http://dx.doi.org/10.1115/1.2806821

Wang CH; Brown MW, 1996, 'Life prediction techniques for variable amplitude multiaxial fatigue—Part 2: Comparison with experimental results', Journal of Engineering Materials and Technology, Transactions of the ASME, 118, pp. 371 - 374, http://dx.doi.org/10.1115/1.2806822

Wang CH; Brown MW, 1996, 'On plastic deformation and fatigue under multiaxial loading', Nuclear Engineering and Design, 162, pp. 75 - 84, http://dx.doi.org/10.1016/0029-5493(95)01134-X

Wang CH, 1996, 'Viscoelasticity of engineering materials', NDT & E International, 29, pp. 241 - 241, http://dx.doi.org/10.1016/s0963-8695(96)00025-4

Wang C-H; Zhang L; Mai Y-W, 1995, 'Deformation and fracture of Macadamia nuts', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/bf00032188

Wang CH; Brown MW, 1994, 'Modelling of the deformation behaviour of flake graphite iron under multi-axial cyclic loading', The Journal of Strain Analysis for Engineering Design, 29, pp. 277 - 288, http://dx.doi.org/10.1243/03093247V294277

Wang CH; Zhang L; Mai YW, 1994, 'Deformation and fracture of Macadamia nuts - Part 1: Deformation analysis of nut-in-shell', International Journal of Fracture, 69, pp. 51 - 65, http://dx.doi.org/10.1007/BF00032188

Back to profile page