By Emeritus Professor Jun Wang

Journal articles

Zhao B; Liu H; Huang C; Wang J; Cheng M; Zhan Q, 2018, 'Evolution mechanisms of high temperature mechanical properties and microstructures of Al2O3/SiCw/TiCnnanocomposite materials', Journal of Alloys and Compounds, 737, pp. 46 - 52, http://dx.doi.org/10.1016/j.jallcom.2017.12.100

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2018, 'Crack-healing behavior of Al2O3-TiB2-TiSi2ceramic material', Ceramics International, 44, pp. 2132 - 2137, http://dx.doi.org/10.1016/j.ceramint.2017.10.164

Li H; Wang J; Kwok N; Nguyen T; Yeoh GH, 2018, 'A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining', Journal of Manufacturing Processes, 31, pp. 156 - 161, http://dx.doi.org/10.1016/j.jmapro.2017.11.013

Zhang P; Zhu H; Huang C; Wang J; Yao Y; Yao P, 2018, 'Experimental study on micro milling holes in high-strength elastic alloy 3J33', IPPTA Quarterly Journal of Indian Pulp and Paper Technical Association, 30, pp. 637 - 650

Wang J; Xu M-Q; Jiang X-L; Mei X-Y; Liu X-G, 2018, 'Histone deacetylase inhibitor SAHA-induced epithelial-mesenchymal transition by upregulating Slug in lung cancer cells', ANTI-CANCER DRUGS, 29, pp. 80 - 88, http://dx.doi.org/10.1097/CAD.0000000000000573

Zhao B; Liu H; Huang C; Wang J; Cheng M, 2017, 'Theoretical hardness analysis and experimental verification for composite ceramic tool materials', Ceramics International, 43, pp. 15580 - 15585, http://dx.doi.org/10.1016/j.ceramint.2017.08.112

Li M; Huang C; Zhao B; Liu H; Wang J; Liu Z, 2017, 'Mechanical properties and microstructure of Al2O3-TiB2-TiSi2ceramic tool material', Ceramics International, 43, pp. 14192 - 14199, http://dx.doi.org/10.1016/j.ceramint.2017.07.162

Yun H; Zou B; Wang J, 2017, 'Effects of sintering temperature and nano Ti(C,N) on the microstructure and mechanical properties of Ti(C,N) cermets cutting tool materials with low Ni-Co', Materials Science and Engineering A, 705, pp. 98 - 104, http://dx.doi.org/10.1016/j.msea.2017.08.033

Li L; Wang J, 2017, 'Direct writing of large-area micro/nano-structural arrays on single crystalline germanium substrates using femtosecond lasers', Applied Physics Letters, 110, pp. 251901 - 251901, http://dx.doi.org/10.1063/1.4986784

Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002

Feng S; Huang CZ; Wang J; Zhu HT, 2017, 'Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology', Materials Science in Semiconductor Processing, 68, pp. 199 - 212, http://dx.doi.org/10.1016/j.mssp.2017.05.029

Wang RJ; Wang C; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, 89, pp. 151 - 162, http://dx.doi.org/10.1007/s00170-016-9109-z

Wang W; Yao P; Wang J; Huang C; Zhu H; Liu H; Zou B; Liu Y, 2017, 'Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A theoretical model and experimental verification', Ceramics International, 43, pp. 11596 - 11609, http://dx.doi.org/10.1016/j.ceramint.2017.05.327

Wang RJ; Wang CY; Wen W; Wang J, 2017, 'Experimental study on a micro-abrasive slurry jet for glass polishing', International Journal of Advanced Manufacturing Technology, 89, pp. 451 - 462, http://dx.doi.org/10.1007/s00170-016-9109-z

Wang W; Yao P; Wang J; Huang C; Kuriyagawa T; Zhu H; Zou B; Liu H, 2017, 'Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching', Ceramics International, 43, pp. 10726 - 10736, http://dx.doi.org/10.1016/j.ceramint.2017.05.054

Feng S; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2017, 'An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining', Precision Engineering, 47, pp. 33 - 45, http://dx.doi.org/10.1016/j.precisioneng.2016.07.002

Zhu H; Wang J; Yao P; Huang C, 2017, 'Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germanium', International Journal of Machine Tools and Manufacture, 116, pp. 25 - 39, http://dx.doi.org/10.1016/j.ijmachtools.2017.01.002

Thongkaew K; Wang J, 2017, 'An experimental study of the particle velocities in abrasive waterjets', International Journal of Abrasive Technology, 8, pp. 147 - 156, http://dx.doi.org/10.1504/IJAT.2017.089291

Jing X; Li H; Wang J; Yuan Y; Zhang D; Kwok N; Nguyen T, 2017, 'An investigation of surface roughness in micro-end-milling of metals', Australian Journal of Mechanical Engineering, 15, pp. 166 - 174, http://dx.doi.org/10.1080/14484846.2016.1211472

Zhang Y; Li C; Ji H; Yang X; Yang M; Jia D; Zhang X; Li R; Wang J, 2017, 'Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms', International Journal of Machine Tools and Manufacture, 122, pp. 81 - 97, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.002

Wei X; Nie S; Liu H; Sun J; Liu J; Li J; Li S; Wang S; Han S; Wang J; Sun Y, 2017, 'Angiopoietin-like protein 2 facilitates non-small cell lung cancer progression by promoting the polarization of M2 tumor-associated macrophages', AMERICAN JOURNAL OF CANCER RESEARCH, 7, pp. 2220 - 2233

Zhao B; Liu H; Huang CZ; Wang J; Cheng M, 2017, 'Fabrication and mechanical properties of Al 2 O 3 -SiC w -TiC np ceramic tool material', Ceramics International, 43, pp. 10224 - 10230, http://dx.doi.org/10.1016/j.ceramint.2017.05.049

Yang M; Li C; Zhang Y; Jia D; Zhang X; Hou Y; Li R; Wang J, 2017, 'Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions', International Journal of Machine Tools and Manufacture, 122, pp. 55 - 65, http://dx.doi.org/10.1016/j.ijmachtools.2017.06.003

Liu D; Huang C; Zhu H; Wang J; Yao P, 2016, 'Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle', Tribology Letters, 64, pp. 1 - 13, http://dx.doi.org/10.1007/s11249-016-0779-3

Lv Z; Huang C; Zhu H; Wang J; Hou R, 2016, 'A 3D simulation of the fluid field at the jet impinging zone in ultrasonic-assisted abrasive waterjet polishing', The International Journal of Advanced Manufacturing Technology, 87, pp. 3091 - 3103, http://dx.doi.org/10.1007/s00170-016-8722-1

Wang W; Yao P; Wang J; Huang C; Zhu H; Zou B; Liu H; Yan J, 2016, 'Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions', International Journal of Machine Tools and Manufacture, 109, pp. 126 - 136, http://dx.doi.org/10.1016/j.ijmachtools.2016.07.007

Wang J; Li W, 2016, 'A new look into the loose particle impact process for ductile materials', Materials Science Forum, 874, pp. 213 - 218, http://dx.doi.org/10.4028/www.scientific.net/MSF.874.213

Liu G; Zou B; Huang C; Wang X; Wang J; Liu Z, 2016, 'Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel', The International Journal of Advanced Manufacturing Technology, 83, pp. 257 - 264, http://dx.doi.org/10.1007/s00170-015-7564-6

Wang X; Huang C; Wang J; Zou B; Liu G; Liu H, 2016, 'Finite element simulation of the cutting process for Inconel 718 alloy using a new material constitutive model', Key Engineering Materials, 693, pp. 1046 - 1053, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.1046

Xu K; Zou B; Huang C; Zhou HJ; Liu H; Wang J; Zhu H, 2016, 'Study on Micro Milling Tool with Hot-pressed Sintered Ti(C7N3)-based Cermet', Key Engineering Materials, 693, pp. 906 - 913, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.906

Li W; Zhu H; Wang J; Huang C, 2016, 'Radial-mode abrasive waterjet turning of short carbon–fiber-reinforced plastics', Machining Science and Technology, 20, pp. 231 - 248, http://dx.doi.org/10.1080/10910344.2016.1165836

Liu D; Zhu H; Huang C; Wang J; Yao P, 2016, 'Prediction model of depth of penetration for alumina ceramics turned by abrasive waterjet—finite element method and experimental study', International Journal of Advanced Manufacturing Technology, 87, pp. 2673 - 2682, http://dx.doi.org/10.1007/s00170-016-8600-x

Liu G; Zou B; Huang C; Wang X; Wang J; Liu Z, 2016, 'Tool damage and its effect on the machined surface roughness in high-speed face milling the 17-4PH stainless steel', International Journal of Advanced Manufacturing Technology, 83, pp. 257 - 264, http://dx.doi.org/10.1007/s00170-015-7564-6

Qi H; Fan J; Wang J; Li H, 2016, 'On the erosion process on quartz crystals by the impact of multiple high-velocity micro-particles', Tribology International, 95, pp. 462 - 474, http://dx.doi.org/10.1016/j.triboint.2015.12.003

Sui X; Huang C; Zou B; Liu H; Zhu HONGTAO; Wang J, 2016, 'A Hybrid Machining Database System Using Case-based Reasoning and Fuzzy Technology', Key Engineering Materials, 693, pp. 1805 - 1810, http://dx.doi.org/10.4028/www.scientific.net/KEM.693.1805

Xu K; Zou B; Wang Y; Guo P; Huang C; Wang J, 2016, 'An experimental investigation of micro-machinability of aluminum alloy 2024 using Ti(C7N3)-based cermet micro end-mill tools', Journal of Materials Processing Technology, 235, pp. 13 - 27, http://dx.doi.org/10.1016/j.jmatprotec.2016.04.011

Ji W; Zou B; Huang C; Wang J; Xu K; Liu Y; Huang C, 2016, 'Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials', Journal of Alloys and Compounds, 677, pp. 190 - 203, http://dx.doi.org/10.1016/j.jallcom.2016.03.237

Wang W; Yao P; Wang J; Huang C; Zhu H, 2016, 'Heat-assisted high efficiency ductile dry grinding of fused silica', Optics and Precision Engineering, 24, pp. 83 - 93, http://dx.doi.org/10.3788/OPE.20162401.0083

Huang C; Zou B; Guo P; Liu Y; Huang C; Wang J, 2016, 'Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls', International Journal of Refractory Metals and Hard Materials, 59, pp. 40 - 55, http://dx.doi.org/10.1016/j.ijrmhm.2016.05.007

Liu H; Shi Q; Huang C; Zou B; Xu L; Wang J, 2015, 'In-situ Fabricated TiB2 Particle-whisker Synergistically Toughened Ti(C, N)-based Ceramic Cutting Tool Material', Chinese Journal of Mechanical Engineering, 28, pp. 338 - 342, http://dx.doi.org/10.3901/CJME.2015.0107.008

Wu Q; Wang J; Li H, 2015, 'Temperature evolution and material removal mechanisms in nanosecond pulsed laser ablation of polycrystalline diamond', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229, pp. 1357 - 1372, http://dx.doi.org/10.1177/0954405414535773

Li H; Wang J, 2015, 'An experimental study of abrasive waterjet machining of Ti-6Al-4V', International Journal of Advanced Manufacturing Technology, 81, pp. 361 - 369, http://dx.doi.org/10.1007/s00170-015-7245-5

Qi H; Fan J; Wang J, 2015, 'A study of the micro-machining process on quartz crystals using an abrasive slurry jet', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 229, pp. 421 - 434, http://dx.doi.org/10.1177/0954405414528167

Liu H; Chai Y; Huang C; Liu H; Wang J, 2015, 'Effect of boron nitride nanotubes content on mechanical properties and microstructure of Ti(C,N)-based cermets', Ceramics International, 41, pp. 2813 - 2818, http://dx.doi.org/10.1016/j.ceramint.2014.10.101

Nguyen T; Wang J; Li W, 2015, 'Process models for controlled-depth abrasive waterjet milling of amorphous glasses', International Journal of Advanced Manufacturing Technology, 77, pp. 1177 - 1189, http://dx.doi.org/10.1007/s00170-014-6514-z

Chen Y; Li H; Wang J, 2015, 'Analytical modelling of cutting forces in near-orthogonal cutting of titanium alloy Ti6Al4V', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229, pp. 1122 - 1133, http://dx.doi.org/10.1177/0954406214542967

Chen Y; Li H; Wang J, 2015, 'Further development of oxleys predictive force model for orthogonal cutting', Machining Science and Technology, 19, pp. 86 - 111, http://dx.doi.org/10.1080/10910344.2014.991026

Qi H; Fan J; Wang J; Li HUAIZHONG, 2015, 'Impact erosion by high velocity micro-particles on a quartz crystal', Tribology International, 82, pp. 200 - 210, http://dx.doi.org/10.1016/j.triboint.2014.10.016

Lv Z; Huang C; Zhu H; Wang J; Wang Y; Yao P, 2015, 'A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials', The International Journal of Advanced Manufacturing Technology, 78, pp. 1361 - 1369, http://dx.doi.org/10.1007/s00170-014-6528-6

Bai X; Huang C; Wang J; Zou B; Liu H, 2015, 'Fabrication and characterization of Si3N4 reinforced Al2O3-based ceramic tool materials', Ceramics International, 41, pp. 12798 - 12804, http://dx.doi.org/10.1016/j.ceramint.2015.06.115

Back to profile page