By Emeritus Professor Jun Wang

Journal articles

Wang XY; Xu WJ; Wang L; Wang J; Liang Y, 2010, 'Heat Absorbing Rate in Laser Drilling of YG8 Alloy', Advanced Materials Research, 97-101, pp. 4164 - 4167, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4164

Pang K; Nguyen T; Fan F; Wang J, 2010, 'Machining of micro-channels on brittle glass using an abrasive slurry jet', Key Engineering Materials, 443, pp. 639 - 644, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.639

Basak AK; Fan J; Wang J; Mathew P, 2010, 'Material removal mechanisms of monocrystalline silicon under the impact of high velocity micro-particles', Wear, 269, pp. 269 - 277, http://dx.doi.org/10.1016/j.wear.2010.04.006

Fan J; Fan CM; Wang J, 2010, 'Modeling the material removal rate in micro abrasive water jet machining of glasses', Advanced Materials Research, 135, pp. 370 - 375, http://dx.doi.org/10.4028/www.scientific.net/AMR.135.370

Ali Y; Mathew P; Wang J, 2010, 'Progress in the modeling of abrasive jet machining', Advanced Materials Research, 126-128, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.3

He L; Zhao XF; Shi HY; Wang J, 2010, 'Research and development of four axis linkage grinding simulation system of ball-nose end mill', Key Engineering Materials, 443, pp. 314 - 317, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.314

Liu Z; Huang CZ; Wang J; Zhu H; Li QL, 2010, 'Study on machining system of precision micro abrasive water jet and polishing experiment', Key Engineering Materials, 431-432, pp. 102 - 105, http://dx.doi.org/10.4028/www.scientific.net/KEM.431-432.102

Wan DP; Mathew P; Wang J, 2010, 'Thermal effect analysis of femtosecond laser scribing of silicon', Key Engineering Materials, 443, pp. 687 - 692, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.687

Wang K; Kang R; Wang J, 2009, 'Influence of abrasive and chemical composition on chemo-mechanical polishing of MgO single crystal substrate', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 19 - 23

Qiu Y; Wang C; Song Y; Wang J, 2009, 'Micro channels machined on glass by micro abrasive jet machining', Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, pp. 32 - 37

Wang J, 2009, 'A focused review on enhancing the abrasive waterjet cutting performance by using controlled nozzle oscillation', Key Engineering Materials, 404, pp. 33 - 44

Wang J, 2009, 'A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramics', Journal of Materials Processing Technology, 209, pp. 2314 - 2320, http://dx.doi.org/10.1016/j.jmatprotec.2008.05.021

Nguyen T; Pang K; Wang J, 2009, 'A preliminary study of the erosion process in micro-machining of glasses with a low pressure slurry jet', Key Engineering Materials, 389-390, pp. 375 - 380, http://www.scopus.com/inward/record.url?eid=2-s2.0-58149517842&partnerID=40&md5=0dc82b003472a75b7bed319c84070ba1

Nguyen T; Pang K; Wang J, 2009, 'A preliminary study of the erosion process in micro-machining of glasses with a low pressure slurry jet.', Key Engineering Materials, 389-390, pp. 375 - 380, http://dx.doi.org/10.4028/www.scientific.net/KEM.389-390.375

Huang H; Zhang LC; Wang J; Jiang Z; Zhou L; Xu X; Kuriyagawa T, 2009, 'Advances in Abrasive Technology XII (Editors)', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 76-78, pp. 1 - 730

Li H; Wang J; Fan J, 2009, 'Analysis and modelling of particle velocities in micro-abrasive air jet', International Journal of Machine Tools and Manufacture, 49, pp. 850 - 858, http://dx.doi.org/10.1016/j.ijmachtools.2009.05.012

Li QL; Huang CZ; Wang J; Zhu H; Che CL; Liu Z, 2009, 'Cutting depth model for micro abrasive air jet machining', Manufacturing Technology & Machine Tool [English title] [Chinese title] - Zhizao Jishu yu Jichuang, pp. 88 - 91, http://www.cqvip.com/qk/94897A/200908/index.shtml

Wang J; Shanmugam DK, 2009, 'Cutting meat with bone using an ultrahigh pressure abrasive waterjet', Meat Science, 81, pp. 671 - 677, http://dx.doi.org/10.1016/j.meatsci.2008.11.010

Wang J; Zhong Y, 2009, 'Enhancing the depth of cut in abrasive waterjet cutting of alumina ceramics by using multipass cutting with nozzle oscillation.', Machining Science and Technology, 13, pp. 76 - 91, http://dx.doi.org/10.1080/10910340902776085

Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2009, 'Experimental study on abrasive waterjet polishing for hard-brittle materials', International Journal of Machine Tools and Manufacture, 49, pp. 569 - 578, http://dx.doi.org/10.1016/j.ijmachtools.2009.02.005

Tangwarodonmukun V; Wang J, 2009, 'Laser micromachining of silicon substrates', Advanced Materials Research, 76-78, pp. 416 - 421, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.416

Qiu YF; Wang CY; Wang J; Song YX, 2009, 'Masked and unmasked machining of glass by micro abrasive jet', Advanced Materials Research, 69-70, pp. 182 - 186, http://dx.doi.org/10.4028/www.scientific.net/AMR.69-70.182

Wang J; Nguyen T; Pang K, 2009, 'Mechanisms of microhole formation on glasses by an abrasive slurry jet', Journal of Applied Physics, 105, pp. 1 - 4, http://dx.doi.org/10.1063/1.3079802

Zhu HT; Huang CZ; Wang J; Zhao G; Li QL, 2009, 'Modeling material removal in fracture erosion for brittle materials by abrasive waterjet', Advanced Materials Research, 76-78, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.76-78.357

Fan JM; Wang CY; Wang J, 2009, 'Modelling the erosion rate in micro abrasive air jet machining of glasses', Wear, 266, pp. 968 - 974, http://dx.doi.org/10.1016/j.wear.2008.12.019

Wang J, 2009, 'Particle velocity models for ultra-high pressure abrasive waterjets', Journal of Materials Processing Technology, 209, pp. 4573 - 4577, http://dx.doi.org/10.1016/j.jmatprotec.2008.10.021

Madadnia J; Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of cavitation induced surface erosion in abrasive waterjet cutting systems.', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 53-54, pp. 357 - 362

Shanmugam DK; Nguyen T; Wang J, 2008, 'A study of delamination on graphite/epoxy composites in abrasive waterjet machining', Composites Part A - Applied Science and Manufacturing, 39, pp. 923 - 929, http://dx.doi.org/10.1016/j.compositesa.2008.04.001

Wang J; Zhang Q, 2008, 'A study of high performance plane rake faced twist drills. Part 1: Geometrical analysis and experimental investigation.', International Journal of Machine Tools and Manufacture, 48, pp. 1276 - 1285

Wang J; Zhang Q, 2008, 'A study of high-performance plane rake faced twist drills. Part II: Predictive force models', International Journal of Machine Tools and Manufacture, 48, pp. 1286 - 1295, http://dx.doi.org/10.1016/j.ijmachtools.2008.03.006

Wang XY; Wang J; Xu WJ; Wu DJ; Lei MK, 2008, 'A study of laser surface modification for GCr15 steel', International Journal of Materials and Product Technology, 31, pp. 88 - 96

Liu H; Wang J; Huang C, 2008, 'Abrasive liquid jet as a flexible polishing tool', International Journal of Materials and Product Technology, 31, pp. 2 - 13, http://dx.doi.org/10.1504/IJMPT.2008.015884

Nguyen T; Shanmugam DK; Wang J, 2008, 'Effect of liquid properties on the stability of an abrasive waterjet', International Journal of Machine Tools and Manufacture, 48, pp. 1138 - 1147, http://dx.doi.org/10.1016/j.ijmachtools.2008.01.009

Fan J; Wang CY; Wang J; Luo GS, 2008, 'Effect of nozzle type and abrasive on machinability in micro abrasive air jet machining of glass', Key Engineering Materials, 359-360, pp. 404 - 408

Li QL; Wang J; Huang C, 2008, 'Erosion mechanisms of monocrystalline silicon under a microparticle laden air jet', Journal of Applied Physics, 104, pp. 34903 - 034910

Zhu HT; Huang CZ; Wang J; Li QL; Che CL, 2008, 'Experimental study on abrasive waterjet machining mechanisms of brittle materials.', Key Engineering Materials, 375-376, pp. 62 - 66

Zhu HT; Huang CZ; Wang J; Lu XY; Feng YX, 2008, 'Machinability of glass by abrasive waterjet.', International Journal of Materials and Product Technology, 31, pp. 106 - 112

Shanmugam DK; Wang J; Liu H, 2008, 'Minimisation of kerf tapers in abrasive waterjet machining of alumina ceramics using a compensation technique', International Journal of Machine Tools and Manufacture, 48, pp. 1527 - 1534

Sun Y; Wang J; Guo D; Zhang Q, 2008, 'Modeling and numerical simulation for the machining of helical surface profiles on cutting tools', International Journal of Advanced Manufacturing Technology, 36, pp. 525 - 534, http://dx.doi.org/10.1007/s00170-006-0860-4

Kang R; Wang K; Wang J; Guo D, 2008, 'Removal of scratch on the surface of MgO single crystal substrate in chemical mechanical polishing process', Applied Surface Science, 254, pp. 4856 - 4863, http://dx.doi.org/10.1016/j.apsusc.2008.01.150

Fan J; Wang C; Wang J; Luo G, 2008, 'Study on the machining performance of micro abrasive jet machining.', China Mechanical Engineering, 5, pp. 584 - 589

Che CL; Huang CZ; Wang J; Zhu HT; Li QL, 2008, 'Theoretical model of surface roughness for polishing super hard materials with abrasive waterjet.', Key Engineering Materials, 375-376, pp. 465 - 469

Li QL; Huang C; Wang J; Zhu HT; Che CL, 2007, 'A study on erosion mechanisms of quartz crystals polished by micro abrasive waterjet', Advanced Materials Research, 24-25, pp. 195 - 199

Feng YX; Huang C; Wang J; Hou RG; Lu XY, 2007, 'An experimental study on milling Al2 O3 ceramics with abrasive waterjet.', Key Engineering Materials, 339, pp. 500 - 504

Huang C; Liu H; Wang J; Wang H, 2007, 'Multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', Chinese Journal of Mechanical Engineering, 20, pp. 5 - 7

Wang J, 2007, 'Predictive depth of jet penetration models for abrasive waterjet cutting of alumina ceramics', International Journal of Mechanical Sciences, 49, pp. 306 - 316, http://dx.doi.org/10.1016/j.ijmecsci.2006.09.005

Hou RG; Huang C; Wang J; Lu XY; Feng YX, 2007, 'Simulation of solid-liquid two-phase flow inside and outside the abrasive water jet nozzle.', Key Engineering Materials, 339, pp. 453 - 457

Feng YX; Huang CZ; Wang J, 2007, 'Study of surface quality of ceramics cut by abrasive waterjet', Tool Engineering, 41, pp. 43 - 45

Feng YX; Huang CZ; Wang J; Lu XY; Zhu HT, 2007, 'Surface Characteristics of Ceramics Milled with Abrasive Waterjet Technology', Key Engineering Materials, 329, pp. 335 - 340, http://dx.doi.org/10.4028/www.scientific.net/kem.329.335

Feng YX; Huang C; Wang J; Lu XY; Zhu HT, 2007, 'Surface characteristics of ceramics milled with abrasive waterjet technology.', Key Engineering Materials, 329, pp. 335 - 340

Back to profile page