By Emeritus Professor Jun Wang

Journal articles

Xu X; Li X; Ye X; Liu G; Wang J; Peng Z; Liang T; Yang W; Hao X, 2014, 'Chemical ablation therapy of recurrent mediastinal nodal metastasis in post-radiotherapy cancer patients', MEDICAL ONCOLOGY, 31, http://dx.doi.org/10.1007/s12032-014-0224-0

Zhou H; Huang Chuanzhen ; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effect of ball-milling time on the microstructure and mechanical properties of submicron Ti(C,N)-based cermets', Key Engineering Materials, 589-590, pp. 584 - 589, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.584

Zou C; Huang C; Zou B; Fei Y; Liu H; Zhu H; Wang J, 2014, 'Establishment of the low defect ceramic cutting tool database', Key Engineering Materials, 589-590, pp. 357 - 360, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.357

Wang Y; Zhu H; Huang C; Wang J; Yao P; Zhang Z, 2014, 'A Study on Erosion of Alumina Wafer in Abrasive Water Jet Machining', Advanced Materials Research, 1017, pp. 228 - 233, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.228

Li W; Zhu H; Wang J; Huang C, 2014, 'A Surface Roughness Model in Radial-Mode Abrasive Waterjet Turning for High-Tensile Steels', Applied Mechanics and Materials, 483, pp. 177 - 181, http://dx.doi.org/10.4028/www.scientific.net/AMM.483.177

Lv Z; Huang C; Zhu H; Wang J; Yao P; Liu ZW, 2014, 'An SPH simulation on vibration assisted abrasive erosion of hard brittle material in abrasive waterjet machining', Advanced Materials Research, 1017, pp. 199 - 204, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.199

Zhu H; Wang J; Li W; Li H, 2014, 'Microgrooving of Germanium Wafers Using Laser and Hybrid Laser-Waterjet Technologies', Advanced Materials Research, 1017, pp. 193 - 198, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.193

Wu Q; Wang J; Huang C, 2014, 'Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228, pp. 903 - 917, http://dx.doi.org/10.1177/0954405413510290

Li H; Jing X; Wang J, 2014, 'Detection and analysis of chatter occurrence in micro-milling process', Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 228, pp. 1359 - 1371, http://dx.doi.org/10.1177/0954405414522216

Yao P; Wang W; Huang C; Wang J; Zhu H; Zhang Z, 2014, 'High Efficiency Abrasive Waterjet Dressing of Diamond Grinding WheelAdvacned', Advanced Materials Research, 1017, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243

Wang XY; Huang CZ; Zou B; Zhang QG; Liu HL; Zhu HT; Wang J, 2014, 'Tool life of coated tools in face milling of GH4169 at various cutting speeds', Materials Science Forum, 770, pp. 126 - 129, http://dx.doi.org/10.4028/www.scientific.net/MSF.770.126

Wang X; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'A new method to evaluate the machinability of difficult-to-cut materials', The International Journal of Advanced Manufacturing Technology, 75, pp. 91 - 96, http://dx.doi.org/10.1007/s00170-014-6126-7

Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'A study on in-situ synthesis of TiB2-SiC ceramic composites by reactive hot pressing', Ceramics International, 40, pp. 2305 - 2313, http://dx.doi.org/10.1016/j.ceramint.2013.07.152

Song J; Huang C; Lv M; Zou B; Liu H; Wang J, 2014, 'Cutting performance and failure mechanisms of TiB2-based ceramic cutting tools in machining hardened Cr12MoV mold steel', International Journal of Advanced Manufacturing Technology, 70, pp. 495 - 500, http://dx.doi.org/10.1007/s00170-013-5296-z

Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Dynamic fatigue behavior of Al2O3/TiC micro-nano-composite ceramic tool materials at ambient and high temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 593, pp. 64 - 69, http://dx.doi.org/10.1016/j.msea.2013.11.035

Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effect of ball-milling time on the microstructure and mechanical properties of submicron Ti(C, N)-based cermets', Key Engineering Materials, 589-590, pp. 584 - 589, http://www.scopus.com/inward/record.url?eid=2-s2.0-84890046227&partnerID=40&md5=85ec13c7d8309234a0d664050ebc495e

Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials', Materials Science and Engineering: A, 618, pp. 462 - 470, http://dx.doi.org/10.1016/j.msea.2014.09.052

Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2014, 'Effects of particulate metallic phase on microstructure and mechanical properties of carbide reinforced alumina ceramic tool materials', Ceramics International, 40, pp. 2809 - 2817, http://dx.doi.org/10.1016/j.ceramint.2013.10.033

Zhou H; Huang C; Zou B; Liu H; Zhu H; Yao P; Wang J, 2014, 'Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials', International Journal of Refractory Metals and Hard Materials, 47, pp. 71 - 79, http://dx.doi.org/10.1016/j.ijrmhm.2014.06.023

Zou B; Ji W; Huang C; Wang J; Li S; Xu K, 2014, 'Effects of superfine refractory carbide additives on microstructure and mechanical properties of TiB2-TiC+Al2O3 composite ceramic cutting tool materials', Journal of Alloys and Compounds, 585, pp. 192 - 202, http://dx.doi.org/10.1016/j.jallcom.2013.09.119

Song J; Huang C; Lv M; Zou B; Wang S; Wang J; An J, 2014, 'Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 605, pp. 137 - 143, http://dx.doi.org/10.1016/j.msea.2014.03.036

Zou C; Huang C; Zou B; Fei Y; Liu H; Zhu H; Wang J, 2014, 'Establishment of the low defect ceramic cutting tool database', Key Engineering Materials, 589-590, pp. 357 - 360, http://dx.doi.org/10.4028/www.scientific.net/KEM.589-590.357

Tangwarodomnukun V; Wang J; Huang C; Zhu H, 2014, 'Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates', International Journal of Machine Tools and Manufacture, 79, pp. 1 - 16, http://dx.doi.org/10.1016/j.ijmachtools.2013.12.003

Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of hot pressed TiB2-SiC composite ceramic tool materials at room and elevated temperatures', Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 606, pp. 108 - 116, http://dx.doi.org/10.1016/j.msea.2014.03.084

Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2014, 'Microstructure and mechanical properties of TiB2-SiC ceramic composites by Reactive Hot Pressing', International Journal of Refractory Metals and Hard Materials, 42, pp. 36 - 41, http://dx.doi.org/10.1016/j.ijrmhm.2013.10.007

Liu D; Huang C; Wang J; Zhu H; Yao P; Liu Z, 2014, 'Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design', Ceramics International, 40, pp. 7899 - 7908, http://dx.doi.org/10.1016/j.ceramint.2013.12.137

Jing X; Li H; Wang J; Tian Y, 2014, 'Modelling the cutting forces in micro-end-milling using a hybrid approach', International Journal of Advanced Manufacturing Technology, 73, pp. 1647 - 1656, http://dx.doi.org/10.1007/s00170-014-5953-x

Li H; Lee A; Fan J; Yeoh GH; Wang J, 2014, 'On DEM-CFD study of the dynamic characteristics of high speed micro-abrasive air jet', Powder Technology, 267, pp. 161 - 179, http://dx.doi.org/10.1016/j.powtec.2014.07.018

Li W; Wang J; Zhu H; Huang C, 2014, 'On ultrahigh velocity micro-particle impact on steels - A multiple impact study', Wear, 309, pp. 52 - 64, http://dx.doi.org/10.1016/j.wear.2013.10.011

Yue Z; Huang C; Zhu H; Wang J; Yao P; Liu Z, 2014, 'Optimization of machining parameters in the abrasive waterjet turning of alumina ceramic based on the response surface methodology', International Journal of Advanced Manufacturing Technology, 71, pp. 2107 - 2114, http://dx.doi.org/10.1007/s00170-014-5624-y

Wang XY; Wang J; Xu WJ; Guo DM, 2014, 'Scanning path planning for laser bending of straight tube into curve tube', Optics and Laser Technology, 56, pp. 43 - 51, http://dx.doi.org/10.1016/j.optlastec.2013.07.001

Zou B; Zhou H; Xu K; Huang C; Wang J; Li S, 2014, 'Study of a hot-pressed sintering preparation of Ti(C7N 3)-based composite cermets materials and their performance as cutting tools', Journal of Alloys and Compounds, 611, pp. 363 - 371, http://dx.doi.org/10.1016/j.jallcom.2014.05.150

Zou B; Ji W; Huang C; Li S; Wang J, 2014, 'Study on microstructure and its formation mechanism, and mechanical properties of TiB2-TiC laminated Ti(C5N5) composite ceramic cutting tool material', International Journal of Refractory Metals and Hard Materials, 42, pp. 169 - 179, http://dx.doi.org/10.1016/j.ijrmhm.2013.09.002

Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2014, 'Study on the synthesis and growth mechanisms of the refractory ZrC whiskers', International Journal of Refractory Metals and Hard Materials, 42, pp. 116 - 119, http://dx.doi.org/10.1016/j.ijrmhm.2013.08.011

Lian G; Zhang X; Si H; Wang J; Cui D; Wang Q, 2013, 'Boron nitride ultrathin fibrous nanonets: One-step synthesis and applications for ultrafast adsorption for water treatment and selective filtration of nanoparticles', ACS Applied Materials and Interfaces, 5, pp. 12773 - 12778, http://dx.doi.org/10.1021/am403789c

Li WY; Wang J; Li H; Zhu H; Huang C, 2013, 'On ultrahigh velocity micro-particle impact on steels-A single impact study', Wear, 305, pp. 216 - 227, http://dx.doi.org/10.1016/j.wear.2013.06.011

Manickam S; Wang J; Huang C, 2013, 'Laser-material interaction and grooving performance in ultrafast laser ablation of crystalline germanium under ambient conditions', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227, pp. 1709 - 1718, http://dx.doi.org/10.1177/0954405413492322

Li H; Wang J, 2013, 'Assessment of Cutting Forces in High-speed Milling of Inconel 718 Considering the Dynamic Effects', Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227, pp. 1581 - 1595, http://dx.doi.org/10.1177/0954405413489968

Zhao G; Huang C; Liu H; Zou B; Zhu H; Wang J, 2013, 'Preparation of in-situ growth TaC whiskers toughening Al2O3 ceramic matrix composite', INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 36, pp. 122 - 125, http://dx.doi.org/10.1016/j.ijrmhm.2012.08.003

Li HZ; Wang J, 2013, 'A cutting forces model for milling Inconel 718 alloy based on a material constitutive law', Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227, pp. 1761 - 1775, http://dx.doi.org/10.1177/0954406212469167

Fan J; Wang J, 2013, 'A visualization study of abrasive flow variation in abrasive air jets', Advanced Materials Research, 652-654, pp. 2123 - 2128, http://dx.doi.org/10.4028/www.scientific.net/AMR.652-654.2123

Ali MA; Fan JM; Zhu HT; Wang J, 2013, 'A visualization study of the radial-mode abrasive waterjet turning process for alumina ceramics', Advanced Materials Research, 797, pp. 9 - 14, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.9

Li W; Wang J; Ali YM; Zhu H; Huang C, 2013, 'An investigation into the radial-mode abrasive waterjet turning process on high tensile steels', International Journal of Mechanical Sciences, 77, pp. 365 - 376, http://dx.doi.org/10.1016/j.ijmecsci.2013.05.005

Li ZQ; Wang J; Sun T, 2013, 'Atomistic Simulations of Ultrashort Pulsed Laser Ablation of Polycrystalline Diamond', Current Nanoscience, 9, pp. 804 - 811, http://benthamscience.com/journal/free-copies-online.php?journalID=cnano#top

Wang X; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature', Materials Science and Engineering: A, 580, pp. 385 - 390, http://dx.doi.org/10.1016/j.msea.2013.05.062

Wang X; Huang C; Zou B; Liu H; Wang J, 2013, 'Effects of geometric structure of twist drill bits and cutting condition on tool life in drilling 42CrMo ultrahigh-strength steel', International Journal of Advanced Manufacturing Technology, 64, pp. 41 - 47, http://dx.doi.org/10.1007/s00170-012-4026-2

Yin Z; Huang C; Zou B; Liu H; Zhu H; Wang J, 2013, 'High temperature mechanical properties of Al2O3/TiC micro-nano-composite ceramic tool materials', Ceramics International, 39, pp. 8877 - 8883, http://dx.doi.org/10.1016/j.ceramint.2013.04.081

Qi H; Fan JM; Wang J, 2013, 'Impact erosion of quartz crystals by micro-particles in abrasive waterjet micro-machining', Advanced Materials Research, 797, pp. 46 - 51, http://dx.doi.org/10.4028/www.scientific.net/AMR.797.46

Xu L; Huang C; Liu H; Zou B; Zhu H; Zhao G; Wang J, 2013, 'In situ synthesis of ZrB2-ZrCx ceramic tool materials toughened by elongated ZrB2 grains', Materials & Design, 49, pp. 226 - 233, http://dx.doi.org/10.1016/j.matdes.2013.01.062

Xu L; Huang CZ; Liu HL; Zou B; Zhu HT; Wang J, 2013, 'In-situ growth of TiB2 whiskers in TiB2-TiCx matrix powder', Applied Mechanics and Materials, 401-403, pp. 647 - 650, http://dx.doi.org/10.4028/www.scientific.net/AMM.401-403.647

Back to profile page