ORCID as entered in ROS
https://orcid.org/0000-0003-1699-3687
Select Publications
Conference Papers
, 2017, 'An experimental study of the particle velocities in abrasive waterjets', in ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology, pp. 578 - 585
, 2016, 'An experimental study of the radial-mode abrasive waterjet turning of alumina ceramics', in Proceedings of the 16th International Symposium on Advances in Abrasive Technology, KTH Royal Institute of Technology, Swden, Stockholm, Sweden, pp. 155 - 160, presented at
, 2016, 'Microstructure and formation process of gradient structure of self-diffusion composite tool materials', in International Journal of Nanomanufacturing, pp. 55 - 63, http://dx.doi.org/10.1504/IJNM.2016.076157
, 2015, 'A study of the interaction between abrasive waterjet and target by CFD and FEM method', in Proc of the 16th International Manufacturing Conference in China, The 16th International Manufacturing Conference in China, Hangzhou, China, pp. 19 - 24, presented at
, 2015, 'The microstructure and formation process of gradient structure of self-diffusion gradient composite cutting tool materials', in Proc of the 16th International Manufacturing Conference in China (IMCC2015), Editorial Office of Chinese Journal of Mechanical Engineering, Hangzhou, China, pp. 1278 - 1284, presented at
, 2015, 'An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet', in ISAAT (ed.), Trans Tech Publications, Jeju Island, Korea, pp. 113 - 118, presented at
, 2015, 'Predictive models for the geometrical characteristics of channels milled by abrasive waterjet', in Proc. of 2015 IEEE International Conference on Automation Science and Engineering, IEEE, Gothenburg, Sweden, pp. 1459 - 1464, presented at
, 2014, 'Micro-milling of Ti6Al4V: An Investigation on the Cutting Forces and Surface Integrity', in Brinksmeier E (ed.), Proceedings of the 4th International Conference on Nanomanufacturing (nanoMan2014), 4th International Conference on Nanomanufacturing, Breman, Germany, pp. E1-5, presented at
, 2014, 'Dressing of Diamond Grinding Wheels by Abrasive Water Jet for Freeform Optical Surface Grinding', in Yang L; Ruch E; Li S (eds.), Proceedings of SPIE - The International Society for Optical Engineering, Society of Photo-optical Instrumentation Engineers, Harbin, China, pp. 928108-1 - 928108-8, presented at
, 2014, 'High efficiency abrasive waterjet dressing of diamond grinding wheel', in Advanced Materials Research, pp. 243 - 248, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.243
, 2013, 'The Performance Evaluation and Application of Recycled Concrete in Constructions', in Zhang X; Zhang B; Jiang L; Xie M (eds.), CIVIL, STRUCTURAL AND ENVIRONMENTAL ENGINEERING, PTS 1-4, TRANS TECH PUBLICATIONS LTD, PEOPLES R CHINA, Shenzhen, pp. 127 - +, presented at
, 2010, 'Laser cleaning of fine particles on si-wafers', in AIP Conference Proceedings, International Conference on Advances in Materials and Processing Technologies (AMPT2010), Paris; France, pp. 1588 - 1593, presented at
, 2009, 'Heat absorbing model in laser drilling of hard-alloy sheet', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at
, 2009, 'Predictive cutting force and torque models for the plane rake faced drill point design', in Proceedings of the 12th CIRP Conference on Modelling of Machining Operations - Volume 1, Mondragon University, Arrasate-Mondragon, Spain, presented at
, 2008, 'A plane rake faced drill point design for high drilling performance.', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at
, 2008, 'Modeling the erosion rate in micro abrasive air jet machining of glasses', in Proceeding of the 8th International conference on Frontiers of Design and Manufacturing, 8th International conference on Frontiers of Design and Manufacturing, Tianjin, China, presented at
, 2008, 'Particle velocity models for ultra-high pressure abrasive waterjets', in Proceedings of the Eighth Asia-Pacific Conference on Materials Processing, Materials Processing, Guilin-Guangzhou, China, presented at
, 2007, 'A new predictive model for the depth of cut in abrasive waterjet contouring of alumina ceramics', in Precision Grinding and Abrasive Technology, Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at
, 2007, 'Two dimensional simulation for gas-solid-liquid three-phase flow of abrasive water jet nozzle and experimental validation.', in Precision Grinding and Abrasive Technology, Precision Grinding and Abrasive Technology, Dearborn, Michigan, USA, presented at
, 2006, 'Simulation for the outside velocityfield of abrasive water jet nozzle with different geometry', in Current Development in Abrasive Technology, Dalian, China, presented at
, 2006, 'A study of the process of vibration-erosion for adorning polishing', in Gao H; Wang J; Jin Z; Guo DM (eds.), Advances in Abrasive Machining and Surfacing Technologies, FRONTIERS DESIGN MANUFACTURING, Dalian, China, pp. 257 - +, presented at
, 2006, 'A study of laser surface modification for GCr 15 steel', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, PEOPLES R CHINA, Dalian, pp. 615 - +, presented at
, 2006, 'Machinability of glass by abrasive waterjet', in Gao H; Wang J; Jin Z; Guo DM (eds.), ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, FRONTIERS DESIGN MANUFACTURING, PEOPLES R CHINA, Dalian, pp. 713 - +, presented at
, 2006, 'A study on surface quality of Al2O3 ceramics milled with abrasive waterjet technology', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Abrasive waterjet machining mechanisms of brittle materials considering material microstructure flaws', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Microstructure and mechanical properties of TiB2, matrix ceramic tool materials by low temperature sintering technology', in Advances in Manufacturing Engineering, Advances in Manufacturing Engineering, Xi`an, China, presented at
, 2006, 'Study on multi-scale and multi-phase nanocomposite ceramic tools and cutting performance', in Advanced Design and Manufacturing for Sustainable Development, Advanced Design and Manufacturing for Sustainable Development, Guangzhou, China, presented at
, 2006, 'Study on mechanical properties of multi-scale and multi-phase nanocomposite ceramic tool materials', in Proceedings of the International Conference on Manufacturing Science and Engineering, http://www.scopus.com/inward/record.url?eid=2-s2.0-33751262622&partnerID=40&md5=5a99508bf904255615d4ac7f2c3f0c70
, 2004, 'Collaborative evaluation of engineering design concepts on the web', in CSCWD 2004 - 8th International Conference on Computer Supported Cooperative Work in Design - Proceedings, pp. 224 - 229, http://www.scopus.com/inward/record.url?eid=2-s2.0-15544376774&partnerID=40&md5=ea07ecaca1494b20666f090c4253c59f
, 2004, 'Development of a Postgraduate engineering management program for the Asia-Pacific region', in IEEE International Engineering Management Conference, pp. 856 - 859, http://www.scopus.com/inward/record.url?eid=2-s2.0-17644398481&partnerID=40&md5=76dfd628a2d07a3aaf4f906e5c3da717
, 2003, 'Evaluating design concepts by ranking fuzzy numbers', in International Conference on Machine Learning and Cybernetics, pp. 2596 - 2600, http://www.scopus.com/inward/record.url?eid=2-s2.0-1542345430&partnerID=40&md5=af521fad7d6a13a318287962741b55a0
, 2003, 'Surface roughness and striation patterns vary with controlled vibration of the abrasive waterjet cutting nozzle', in Mechanics and Material Engineering for Science and Experiments, pp. 342 - 346, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141963394&partnerID=40&md5=708f82ce298250e8a37b7d8b0a74e9d4
, 2002, 'Spray pyrolysis technique for fabrication of nano-sized spherical agglomerated oxide powders for batteries', in Ahn JH; Hahn YD (ed.), METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, TRANS TECH PUBLICATIONS LTD, SOUTH KOREA, SEOUL, pp. 325 - 330, presented at
, 2002, 'Enhancing the capability and performance of abrasive waterjet cutting technology by multipass operations', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 270 - 278, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141428749&partnerID=40&md5=3ff0f55c1902a89f5dc78ec7df28f9b3
, 2002, 'Rapid development of spin cast zinc parts using rapid tooling technologies', in Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing (ICFDM'2002), pp. 355 - 359, http://www.scopus.com/inward/record.url?eid=2-s2.0-0141540389&partnerID=40&md5=ad524a963cdc5f2ce83511161a07ae9c
, 2001, 'Effect of spinning techniques on the mechanical properties of polymer-derived silicon carbide fiber', in Gong J; Pan W (ed.), HIGH-PERFORMANCE CERAMICS 2001, PROCEEDINGS, TRANS TECH PUBLICATIONS LTD, PEOPLES R CHINA, KUNMING, pp. 651 - 656, presented at
, 2000, 'Improving the cutting performance in abrasive waterjet machining of layered composites', in Chen DC; Narutaki N; Yamane Y; Chen W; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, PEOPLES R CHINA, BEIJING, pp. 417 - 422, presented at
, 2000, 'Optimization strategy and CAM software for single pass turning operations', in Chen DC; Narutaki N; Yamane Y; Chen W; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, PEOPLES R CHINA, BEIJING, pp. 423 - 430, presented at
, 1999, 'A mechanics of cutting analysis in orthogonal machining with tool flank wear', in Wang J; Scott W; Zhang LC (eds.), ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, WORLD SCIENTIFIC PUBL CO PTE LTD, AUSTRALIA, BRISBANE, pp. 357 - 367, presented at
, 1999, 'Stochastic fracture characteristics of advanced ceramic cutting tools', in Wang J; Scott W; Zhang LC (eds.), ABRASIVE TECHNOLOGY: CURRENT DEVELOPMENT AND APPLICATIONS I, WORLD SCIENTIFIC PUBL CO PTE LTD, AUSTRALIA, BRISBANE, pp. 350 - 356, presented at
, 1999, 'Prediction of shear force and an analysis of yarn slippage for a plain weave carbon fabric in a bias extension state', in IAC 99, Adelaide, Sth Aust, presented at
Conference Proceedings (Editor of)
Wang J; Liu D; Nguyen T, (eds.), 2018, 'Study on surface integrity of the compacted graphite iron machined by high speed milling,', Sydney, presented at The 13th Asia-Pacific Conference on Materials processing, Sydney, 23 August 2018 - 27 August 2018
Wang J; Gao H; Guo D; Jin Z, (eds.), 2016, 'Advanced Surface Finishing Technologies for Engineered Components', Inderscience Enterprises Ltd, Vol. 29, presented at 2006 International Conference on Surface Finish Technology and Surface Engineering, 24 September 2016 - 25 September 2006
Wei X; Zhang Q; Wang J, (eds.), 2009, 'Advances in Computer Aided Design and Digital Entertainment', Inderscience Enterprises Ltd, Vol. 38, presented at International Conference on Computer Aided Design and Digital Entertainment, 03 March 2009 - 05 March 2017
Wang J; Gao H; Guo D; Kang R, (eds.), 2008, 'Current develoment in surface engineering and technologies', Inderscience Enterprises Ltd, Taiyuan, Vol. 31, presented at 2008 International Conference on Surface Finishing Technology & Surface Engineering (ICSFT）, Taiyuan, 22 September 2008 - 23 September 2008
Filter by type
https://orcid.org/0000-0003-1699-3687