Select Publications
Journal articles
2019, 'Rate-dependent mechanical strength and flow behaviour of dual-phase high carbon steel at elevated temperatures: An experimental investigation', Materials Science and Engineering: A, 744, pp. 224 - 234, http://dx.doi.org/10.1016/j.msea.2018.12.002
,2018, 'Fabrication and characterization of a magnetized metal-encapsulated FBG sensor for structural health monitoring', IEEE Sensors Journal, 18, pp. 8739 - 8746, http://dx.doi.org/10.1109/JSEN.2018.2866803
,2018, 'Strain Invariant Failure Theory – Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites', Composite Structures, 209, pp. 1022 - 1034, http://dx.doi.org/10.1016/j.compstruct.2018.03.084
,2017, 'Hybrid structure of white layer in high carbon steel – Formation mechanism and its properties', Scientific Reports, 7, pp. 13288, http://dx.doi.org/10.1038/s41598-017-13749-7
,2017, 'Structural strength and laminate optimization of self-twisting composite hydrofoils using a Genetic Algorithm', Composite Structures, 176, pp. 359 - 378, http://dx.doi.org/10.1016/j.compstruct.2017.05.012
,2017, 'Effect of the addition of multi-walled carbon nanotubes on the thermomechanical properties of epoxy resin', Polymer Composites, 38, pp. 1873 - 1880, http://dx.doi.org/10.1002/pc.23757
,2017, 'Ballast Breakage Analysis Using FBG Acoustic Emission Measurement System', Geotechnical and Geological Engineering, 35, pp. 1239 - 1247, http://dx.doi.org/10.1007/s10706-017-0165-4
,2017, 'In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors', Advanced Manufacturing: Polymer and Composites Science, 3, pp. 52 - 61, http://dx.doi.org/10.1080/20550340.2017.1317447
,2017, 'Experimental and numerical analysis on the geometrical parameters towards the maximum SEA of CFRP components', Composite Structures, 164, pp. 229 - 236, http://dx.doi.org/10.1016/j.compstruct.2016.12.078
,2017, 'Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors', Structural Health Monitoring, 17, pp. 108 - 117, http://dx.doi.org/10.1177/1475921716685935
,2016, 'Effect of Ultrasonic Peening on Residual Stresses at a T-Butt Weld Toe', Materials Research Proceedings, 2, pp. 19 - 24, http://dx.doi.org/10.21741/9781945291173-4
,2016, 'Crashworthy Response of Fibre Metal Laminate Top Hat Structures', Composite Structures, 160, pp. 773 - 781, http://dx.doi.org/10.1016/j.compstruct.2016.10.112
,2016, 'Buckling and Post-Buckling of isotropic and composite stiffened panels: a review on optimisation (2000-2015)', Transactions of RINA, Part A3: International Journal of Maritime Engineering, 158, pp. A-251 - A-267, http://dx.doi.org/10.3940/rina.ijme.2016.a3.388
,2016, 'Evaluation of the physical properties of dental resin composites using optical fiber sensing technology', Dental Materials, 32, pp. 1113 - 1123, http://dx.doi.org/10.1016/j.dental.2016.06.015
,2016, 'Thermal sensitivity and relaxation of carbon fibre- foam sandwich composites with fibre optic sensors', Journal of sandwich structures and materials
,2016, 'In-situ process monitoring for automated fibre placement using fibre Bragg grating sensors', Journal of structural health monitoring, 15, pp. 706 - 714, http://dx.doi.org/10.1177/1475921716658616
,2016, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON OPTIMISATION (2000-2015)', Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 158, pp. A251 - A267, http://dx.doi.org/10.5750/ijme.v158iA3.994
,2015, 'Improved stochastic methods for modelling imperfections for buckling analysis of composite cylindrical shells', Engineering Structures, 100, pp. 385 - 398, http://dx.doi.org/10.1016/j.engstruct.2015.06.013
,2015, 'Molecular dynamics study on effects of aspect ratio of carbon nanotubes in thermosetting epoxy based nanocomposites including modeling of crosslinking process', Advanced Manufacturing: Polymer and Composites Science, 1, pp. 94 - 104, http://dx.doi.org/10.1179/2055035914Y.0000000009
,2015, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON ANALYSIS AND EXPERIMENT (2000-2012)', Transactions of RINA, Part A1: International Journal of Maritime Engineering, 157, pp. A-9 - A-29, http://dx.doi.org/10.3940/rina.ijme.2015.al.300
,2015, 'Intrinsic high-sensitivity sensors based on etched single-mode polymer optical fibers', IEEE Photonics Technology Letters, 27, pp. 604 - 607, http://dx.doi.org/10.1109/LPT.2014.2385875
,2015, 'Stochastic analysis of imperfection sensitive composite cylinders using realistic imperfection models', Composite Structures, 126, pp. 159 - 173, http://dx.doi.org/10.1016/j.compstruct.2015.02.063
,2015, 'Design of shape-adaptive wind turbine blades using Differential Stiffness Bend–Twist coupling', Ocean Engineering, 95, pp. 157 - 165, http://dx.doi.org/10.1016/j.oceaneng.2014.12.010
,2015, 'Isogeometric analysis and genetic algorithm for shape-adaptive composite marine propellers', Computer Methods in Applied Mechanics and Engineering, 284, pp. 835 - 860, http://dx.doi.org/10.1016/j.cma.2014.10.028
,2015, 'Study of Magnetorheological Fluids towards Smart Energy Absorption of Composite Structures for Crashworthiness', Mechanics of Advanced Materials and Structures, 23, pp. 538 - 544, http://dx.doi.org/10.1080/15376494.2015.1007187
,2015, 'BUCKLING AND POST-BUCKLING OF ISOTROPIC AND COMPOSITE STIFFENED PANELS: A REVIEW ON ANALYSIS AND EXPERIMENT (2000-2012)', Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering, 157, pp. A9 - A29, http://dx.doi.org/10.5750/ijme.v157iA1.945
,2014, 'Pressurised Composite Tubes as Variable Load Energy Absorbers', Composite Structures, http://dx.doi.org/10.1016/j.compstruct.2014.09.060
,2014, 'Application of molecular dynamics to evaluate the design performance of low aspect ratio carbon nanotubes in fibre reinforced polymer resin', Composites Part A: Applied Science and Manufacturing, 65, pp. 64 - 72, http://dx.doi.org/10.1016/j.compositesa.2014.03.004
,2014, 'Atoms to Assemblies: A Physics-Based Hierarchical Modelling Approach for Polymer Composite Components', Applied Mechanics and Materials, 553, pp. 41 - 47, http://dx.doi.org/10.4028/www.scientific.net/AMM.553.41
,2013, 'Can more become less? Effects of an intensive assessment environment on students' learning performance', European Journal of Engineering Education, 38, pp. 631 - 651, http://dx.doi.org/10.1080/03043797.2013.834295
,2013, 'Numerical investigations of the mechanical properties of a braided nonvascular stent design using finite element menthod', Computational Materials Science
,2013, 'Free and forced vibration analysis using improved third-order shear deformation theory for functionally graded plates under high temperature loading', Journal of Sandwich Structures and Materials, 15, pp. 583 - 606, http://dx.doi.org/10.1177/1099636213495751
,2013, 'Conceptual design optimisation of a constant-velocity coupling', Mechanism and Machine Theory, 68, pp. 18 - 34, http://dx.doi.org/10.1016/j.mechmachtheory.2013.04.011
,2013, 'A Micromechanical Sub-Modelling Technique for Implementing Onset Theory', Composite Structures, 103, pp. 1 - 8, http://dx.doi.org/10.1016/j.compstruct.2013.03.016
,2013, 'Delamination failure of composite top-hat stiffeners using finite element analysis', Proceedings of the Institution of Mechanical Engineers. Proceedings Part M, Journal of Engineering for the Maritime Environment, 227, pp. 61 - 80, http://dx.doi.org/10.1177/1475090212452975
,2013, 'Experimental Investigation and Control of Magnetorheological Damper towards Smart Energy Absorption based Composite Structures for Crashworthiness', Journal of Multifunctional Composites, 1
,2013, 'Failure Investigation of Top-Hat Composite Stiffened Panels', Ships and Offshore Structures, 9, pp. 186 - 198, http://dx.doi.org/10.1080/17445302.2012.759335
,2013, 'Fracture toughness determination for aluminium alloy 2011-T6 using tensile notched round bar (NRB) test pieces', International Journal of Fracture, 181, pp. 147 - 154, http://dx.doi.org/10.1007/s10704-013-9827-2
,2013, 'Smoothed Finite Element and Genetic Algorithm based optimization for Shape Adaptive Composite Marine Propellers', Composite Structures, http://dx.doi.org/10.1016/j.compstruct.2013.10.016
,2012, 'Performance analysis and optimisation of bend-twist coupled composite hydrofoils using fluid-structure interaction', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 827 - 836
,2012, 'Acoustic emission techniques for failure characterisation in composite top-hat stiffeners', Journal of Reinforced Plastics and Composites, 31, pp. 495 - 516, http://jrp.sagepub.com/content/31/7/495
,2012, 'Free Vibration Analysis of Layered Funcationally Graded Beams with Experimental Validation', Materials and Design, 36, pp. 182 - 190, http://dx.doi.org/10.1016/j.matdes.2011.10.049
,2012, 'Micromechanical modeling for onset of distortional matrix damage of fiber reinforced composite materials.', Composite Structures, 94, pp. 745 - 757, http://dx.doi.org/10.1016/j.compstruct.2011.09.009
,2011, 'A parameter investigation into the thompson constant-velocity coupling', Journal of Mechanical Design, 133, pp. 124501 - 1 - 124501 - 7, http://dx.doi.org/10.1115/1.4005229
,2011, 'Flexible Composite Hydrofoils and Propeller Blades', Trans RINA, Part B1,International Journal of Small Craft Technology, 153, pp. 39 - 46, http://dx.doi.org/10.3940/rina.ijsct.2010.b2.109
,2011, 'Fracture mechanics based predictions of initiation and growth of multi-level delaminations in a composite specimen', International Journal of Fracture, 170, pp. 145 - 157, http://dx.doi.org/10.1007/s10704-011-9619-5
,2011, 'Neural network modelling for damage behaviour of composites using full-field strain measurements', Composite Structures, 93, pp. 383 - 391, http://dx.doi.org/10.1016/j.compstruct.2010.09.003
,2011, 'Prediction of low cycle fatigue life of short fibre composites at elevated temperatures using surrogate modelling.', Composites Part B - Engineering, 42, pp. 1453 - 1460, http://dx.doi.org/10.1016/j.compositesb.2011.04.047
,2011, 'Thermal buckling and elastic vibration of functionally graded beams based on third order shear deformation theory', International Journal of Mechanical Sciences, 53, pp. 734 - 743, http://dx.doi.org/10.1016/j.ijmecsci.2011.06.005
,2010, 'Delamination charaterisation of curved composites using acoustic emission and fibre bragg gratings', International Maritime Conference 2010, Pacific 2010, pp. 252 - 266
,