By Professor Jang-Kyo Kim

Journal articles

Kim JK; Kim DOH; Hwang P, 2000, 'Hardness of bi-layer films on a leadframe substrate', Journal of Materials Science, 35, pp. 4185 - 4192, http://dx.doi.org/10.1023/A:1004827530244

Hodzic A; Stachurski ZH; Kim JK, 2000, 'Nano-indentation of polymer-glass interfaces. Part I. Experimental and mechanical analysis', Polymer, 41, pp. 6895 - 6905, http://dx.doi.org/10.1016/S0032-3861(99)00890-3

Wu J; Yu D; Chan CM; Kim J; Mai YW, 2000, 'Effect of Fiber Pretreatment Condition on the Interfacial Strength and Mechanical Properties of Wood Fiber/PP Composites', Journal of Applied Polymer Science, 76, pp. 1000 - 1010, http://dx.doi.org/10.1002/(SICI)1097-4628(20000516)76:7<1000::AID-APP3>3.0.CO;2-X

Kim JK; Sham ML, 2000, 'Impact and delamination failure of woven-fabric composites', Composites Science and Technology, 60, pp. 745 - 761, http://dx.doi.org/10.1016/S0266-3538(99)00166-9

Kim DH; Kim JK; Hwang P, 2000, 'Anisotropic tribological properties of the coating on a magnetic recording disk', Thin Solid Films, 360, pp. 187 - 194, http://dx.doi.org/10.1016/S0040-6090(99)00884-6

Yi S; Shen L; Kim JK; Yue CY, 2000, 'A failure criterion for debonding between encapsulants and leadframes in plastic ic packages', Journal of Adhesion Science and Technology, 14, pp. 93 - 105, http://dx.doi.org/10.1163/156856100742122

Yi S; Kim JK; Yue CY; Hsieh JH, 2000, 'Adhesion strengths of epoxy molding compounds to gold-plated copper leadframes', Journal of Adhesion, 73, pp. 1 - 17, http://dx.doi.org/10.1080/00218460008029294

Yi S; Kirn JK; Yue CY; Hsieh JH, 2000, 'Bonding strengths at plastic encapsulant-gold-plated copper leadframe interface', Microelectronics Reliability, 40, pp. 1207 - 1214, http://dx.doi.org/10.1016/S0026-2714(00)00048-2

Gao SL; Kim JK, 2000, 'Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion', Composites Part A: Applied Science and Manufacturing, 31, pp. 517 - 530, http://dx.doi.org/10.1016/S1359-835X(00)00009-9

Sohn MS; Hu XZ; Kim JK, 2000, 'Fractography of damaged carbon fiber/epoxy composites after low-velocity impact', Key Engineering Materials, pp. 1177 - 1182

Sohn MS; Hu XZ; Kim JK; Walker L, 2000, 'Impact damage characterization of carbon fibre/epoxy composites with multi-layer reinforcement', Composites Part B: Engineering, 31, pp. 681 - 691, http://dx.doi.org/10.1016/S1359-8368(00)00028-7

Kim JK; Gao SL, 2000, 'Interface adhesion and interlaminar fracture resistance of carbon/PEEK composites influenced by cooling rate', Key Engineering Materials, 183

Kim JK; Gao SL, 2000, 'Interface adhesion and interlaminar fracture resistance of carbon/PEEK composites influenced by cooling rate', Key Engineering Materials, pp. 1063 - 1068

Kim JK; Lebbai M; Liu JH; Kim JH; Yuen MMF, 2000, 'Interface adhesion between copper lead frame and epoxy moulding compound: Effects of surface finish, oxidation and dimples', Proceedings - Electronic Components and Technology Conference, pp. 601 - 608

Sui GX; Yu TX; Kim JK; Zhou BL, 2000, 'Mechanical behavior and failure modes of aluminum/bamboo sandwich plates under quasi-static loading', Journal of Materials Science, 35, pp. 1445 - 1452, http://dx.doi.org/10.1023/A:1004743821478

Sham ML; Kim JK; Sohn MS; Hu S, 2000, 'Static and dynamic tensile responses of glass woven fabric reinforced composites', Key Engineering Materials, pp. 351 - 356

Hodzic A; Kim JK; Stachurski ZH, 2000, 'The nano-scratch technique as a novel method for measurement of an interphase width', Journal of Materials Science Letters, 19, pp. 1665 - 1667, http://dx.doi.org/10.1023/A:1006726429262

Jeon BS; Lee JJ; Kim JK; Huh JS, 1999, 'Low velocity impact and delamination buckling behavior of composite laminates with embedded optical fibers', Smart Materials and Structures, 8, pp. 41 - 48, http://dx.doi.org/10.1088/0964-1726/8/1/004

Djordjevich A; Kim JK; He YZ, 1999, 'Curvature gauges embedded in composites', Materials Science Research International, 5, pp. 210 - 215

Gao SL; Kim JK, 1999, 'Effect of cooling rate on interphase properties of carbon fibre/PEEK composites', Materials Science Research International, 5, pp. 157 - 162

Gao SL; Kim JK, 1999, 'Scanning acoustic microscopy as a tool for quantitative characterisation of damage in CFRPs', Composites Science and Technology, 59, pp. 345 - 354, http://dx.doi.org/10.1016/S0266-3538(98)00086-4

Gao SL; Kim JK, 1999, 'Effect of Cooling Rate on Interphase Properties of Carbon Fibre/Peek Composites', Zairyo/Journal of the Society of Materials Science, Japan, 48, pp. 157 - 162, http://dx.doi.org/10.2472/jsms.48.9Appendix_157

DJORDJEVICH A; KIM J-K; HE Y-Z, 1999, 'CURVATURE GAUGES EMBEDDED IN COMPOSITES', Journal of the Society of Materials Science, Japan, 48, pp. 210 - 215, http://dx.doi.org/10.2472/jsms.48.9appendix_210

Lee DCY; Kim JK, 1998, 'Measurement of residual stresses in encapsulant of a PQFP', Proceedings of the Electronic Packaging Technology Conference, EPTC, pp. 286 - 290

Hirai Y; Hamada H; Kim JK, 1998, 'Impact response of woven glass-fabric composites - I. Effect of fibre surface treatment', Composites Science and Technology, 58, pp. 91 - 104, http://dx.doi.org/10.1016/S0266-3538(97)00111-5

Hirai Y; Hamada H; Kim JK, 1998, 'Impact response of woven glass-fabric composites - II. Effect of temperature', Composites Science and Technology, 58, pp. 119 - 128, http://dx.doi.org/10.1016/S0266-3538(97)00112-7

Kim DH; Kim JK; Sham ML; Hwang P, 1998, 'Indentation Properties of Copper Leadframe with Hard Coatings', Metals and Materials International, 4, pp. 812 - 817, http://dx.doi.org/10.1007/BF03026404

Sham ML; Kim JK; Wu JS, 1998, 'Interlaminar properties of glass woven fabric composites: Mode I and mode II fracture', Key Engineering Materials, pp. 799 - 804

Gao SL; Kim JK, 1998, 'Interphase morphology and fibre pull-out behaviour of carbon fibre-PEEK composites', Key Engineering Materials, pp. 811 - 816

Kim JK, 1998, 'Methods for Improving Impact Damage Resistance of CFRPs', Key Engineering Materials, 141-143, pp. 149 - 168

Dai Y; Kim JK, 1998, 'Numerical study of the single fibre push-out test: Part I. Mechanics of the test', Composite Interfaces, 5, pp. 323 - 343, http://dx.doi.org/10.1163/156855498x00117

Dai Y; Kim JK, 1998, 'Numerical study of the single fibre push-out test: Part II. Influence of materials and test variables', Composite Interfaces, 6, pp. 103 - 120, http://dx.doi.org/10.1163/156855499X00332

Sui GX; Yu TX; Kim JK; Zhou BL, 1998, 'Static mechanical behavior of bamboo/aluminum composites for applications in industrial structures', Key Engineering Materials, pp. 781 - 786

Gao SL; Kim JK, 1998, 'Three-Dimensional Characterization of Impact Damage in CFRPs', Key Engineering Materials, 141-143, pp. 35 - 54

Sham M-L; Kim J-K; Hamada H, 1998, 'Mechanical Performance of Glass Woven Fabric Laminates: Effect of Hybrid Layers with Different Silane Coupling Agents', Polymers and Polymer Composites, 6, pp. 305 - 312, http://dx.doi.org/10.1177/147823919800600507

Choi C; Seo DC; Lee JJ; Kim JK, 1997, 'Effect of embedded optical fibers on the interlaminar fracture toughness of composite laminates', Composite Interfaces, 5, pp. 225 - 240, http://dx.doi.org/10.1163/156855498X00162

Kim JK; Yu TX, 1997, 'Forming and failure behaviour of coated, laminated and sandwiched sheet metals: A review', Journal of Materials Processing Technology, 63, pp. 33 - 42, http://dx.doi.org/10.1016/S0924-0136(96)02596-4

Wong RCP; Hoult AP; Kim JK; Yu TX, 1997, 'Improvement of adhesive bonding in aluminium alloys using a laser surface texturing process', Journal of Materials Processing Technology, 63, pp. 579 - 584, http://dx.doi.org/10.1016/S0924-0136(96)02687-8

Kim JK, 1997, 'Stress transfer in the fibre fragmentation test. Part III Effects of interface debonding and matrix yielding', Journal of Materials Science, 32, pp. 701 - 711, http://dx.doi.org/10.1023/A:1018596004325

Sham M-L; Kim J-K; Wu J, 1997, 'Effects of Coupling Agent Concentration and Hygrothermal Ageing on the Fracture Behaviour of Glass Woven Fabric-Reinforced Vinyl Ester Laminates', Polymers and Polymer Composites, 5, pp. 165 - 175, http://dx.doi.org/10.1177/147823919700500302

Hirai Y; Hamada H; Kim JK, 1996, 'Damage modes in impact loading of glass woven fabric composites', Advanced Composites Letters, 5, pp. 59 - 63, http://dx.doi.org/10.1177/096369359600500205

Kim JK; Leung LM; Lee SWR; Hirai Y, 1996, 'Impact performance of a woven fabric CFRP laminate', Polymers and Polymer Composites, 4, pp. 549 - 561, http://dx.doi.org/10.111/J.0967-3911

Kim JK; Mai YW, 1995, 'Stress transfer in the fibre fragmentation test - Part II Multiple fibre composites', Journal of Materials Science, 30, pp. 3024 - 3032, http://dx.doi.org/10.1007/BF01209212

Zhou L; Kim JK; Baillie C; Mai YW, 1995, 'Fracture Mechanics Analysis of the Fibre Fragmentation Test', Journal of Composite Materials, 29, pp. 881 - 902, http://dx.doi.org/10.1177/002199839502900703

Zhou LM; Mai YW; Ye L; Kim JK, 1995, 'Techniques for evaluating interfacial properties of fibre-matrix composites', Key Engineering Materials, 104-107, pp. 549 - 600

Kim J-K; Park JH, 1995, 'Iosipescu Shear Test of Composite Joint Specimens in Tensile Loading', Advanced Composites Letters, 4, http://dx.doi.org/10.1177/096369359500400402

Kim JK; Zhou L; Bryan SJ; Mai YW, 1994, 'Effects of fibre volume fraction on the stress transfer in fibre pull-out tests', Composites, 25, pp. 470 - 475, http://dx.doi.org/10.1016/0010-4361(94)90171-6

Kim JK; Lu S; Mai YW, 1994, 'Interfacial debonding and fibre pull-out stresses - Part IV Influence of interface layer on the stress transfer', Journal of Materials Science, 29, pp. 554 - 561, http://dx.doi.org/10.1007/BF01162521

Kim JK; MacKay DB; Mai YW, 1993, 'Drop-weight impact damage tolerance of CFRP with rubber-modified epoxy matrix', Composites, 24, pp. 485 - 494, http://dx.doi.org/10.1016/0010-4361(93)90018-4

Kim JK; Mai YW, 1993, 'Fracture of CFRP containing impregnated fibre bundles', Composites Science and Technology, 49, pp. 51 - 60, http://dx.doi.org/10.1016/0266-3538(93)90021-8

Back to profile page