ORCID as entered in ROS
https://orcid.org/0000-0001-5735-158X
Select Publications
Conference Papers
, 2014, 'Anisotropy Effect in the Nanoscratching of Silicon', in Das R; John S (ed.), The 8th Australasian Congress on Applied Mechanics 2014 : ACAM 8 / National Committee on Applied Mechanics of Engineers Australia., Barton, A.C.T. Engineers Australia, 2014, Melbourne, Vic., presented at
, 2014, 'Nonlinear mechanics of optical glass in its super-cooled liquid region', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 252 - 260
, 2014, 'Understanding the Formation Mechanism of Residual Stress during Precision Glass Moulding', in Hwang YM; Jiang CP (ed.), Proceedings of 'Advances in Engineering Plasticity XII' the 12th Asia-Pacific Conference on Engineering Plasticity and Its Application (AEPA 2014), Trans Tech Publications, Kaohsiung, Taiwan, presented at
, 2014, 'Form Error Prediction of Aspheric Ultraprecision Machining Based on Response Surface Methodology', in Proceedings of The 15th International Conference on Precision Engineering, The Japan Society for Precision Engineering, Kanazawa, Ishikawa, Japan, pp. 220 - 224, presented at
, 2014, 'Thermal conductivity measurement of crystalline silicon on sapphire using high frequency 3-omega method', in 5th International Conference on Advanced Nano Materials (ANM2014), International Conference on Advanced Nanomaterials, Aveiro, Portugal, presented at
, 2014, 'Estimation of interface temperature during the pin-on-disk contact sliding of bulk metallic glass', in Proceedings of the10th International Conference on Mechanical Engineering 2013, Organizing Committee ICME2013, Paper ID 107, Dhaka, Bangladesh, pp. 1 - 7, presented at
, 2014, 'Elastic-plastic deformation of KDP crystals under Nanoindentation', in Materials Science Forum, pp. 705 - 711, http://dx.doi.org/10.4028/www.scientific.net/MSF.773-774.705
, 2014, 'Effect of Cyclic Heating on the Hardened Layer Properties Generated by Plunge Cylindrical Grinding', in Advanced Materials Research, pp. 539 - 543, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.539
, 2014, 'Effect of Frequency and Amplitude on the Performance of Elliptic Vibration-Assisted Cutting of Fibre-Reinforced Polymer Composites', in Advanced Materials Research, pp. 753 - 757, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.753
, 2014, 'On the Profile and Microstructure Variations of Grinding-Induced Hardening Layer in A Cylindrical Workpiece', in Advanced Materials Research, pp. 3 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.1017.3
, 2013, 'Tribological behaviour of metallic glass: the underlying mechanism', in Proceedings of 5th World Tribology Congress 2013, 5th World Tribology Congress Organizer. Paper number 96, Turin, Italy, pp. 1 - 4, presented at
, 2013, 'On the Origin of Residual Stresses in Semiconductor Thin Film Systems', in Chen W; Xu R; Wang H (eds.), Proceedings of the 2013 Symposium on Solid Mechanics and Its Applications, 2013 Symposium on Solid Mechanics and Its Applications, Hangzhou, China, pp. 342 - 364, presented at
, 2013, 'Three-dimensional simulation of mixed lubrication in metal strip rolling', in Proceedings of the Fifth Baosteel Biennial Academic Conference, Shanghai Scientific and Technological Literature Publishing House, Shanghai, China, pp. C56 - C63, presented at
, 2013, 'Towards the uniformity of the grinding-induced hardening layer in cylindrical workpieces', in Proceedings of the Fifth Baosteel Biennial Academic Conference, Shanghai Scientific and Technological Literature Publishing House, Shanghai, China, pp. K14 - K20, presented at
, 2013, 'High velocity impact responses of engineered cementitious composite panels', in ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, pp. 755 - 759, http://dx.doi.org/10.3850/978-981-07-5354-2-M-7-75
, 2013, 'Tribological behaviour of metallic glass: The underlying mechanism', in 5th World Tribology Congress, WTC 2013, pp. 3250 - 3253
, 2012, 'A method for estimating the fracture toughness of rocks', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 10, presented at
, 2012, 'A new approach to the investigation of mixed lubrication in metal strip rolling', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 8, presented at
, 2012, 'A note on the reliability of nanoindentation: effect of sample standing', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 7, presented at
, 2012, 'An Assessment of two statistical models for elastic contact analysis between rough surfaces', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 585 - 593, presented at
, 2012, 'Origin of the implantation and annealing effects on residual stress release in a silicon-on-sapphire system during epitaxial re-growth', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 7, presented at
, 2012, 'The mechanism of nano-scale shear banding in metallic glass', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 1 - 8, presented at
, 2012, 'Plastic deformation clusters with high kinetic energy in metallic glass', in LU G (ed.), Plastic deformation clusters with high kinetic energy in metallic glass, The Eleventh Asia-Pacific Conference on Engineering Plasticity and Its Applications, Singapore, pp. 1 - 4, presented at
, 2012, 'An accurate prediction of silicon phases under nanoindentation', in Proceeding of 10th International Conference on Progress of Machining Technology, Japan Society of Precision Engineering (accepted 22 May 2012; Paper ID: 1003), Japan, pp. 13 - 16, presented at
, 2012, 'Plastic deformation behavior in bulk metallic glass under a cutting tip', in Proceeding of International Conference on Progress of Machining Technology (accepted 30 April 2012; Paper ID: 1004), Japan Society of Precision Engineering, Japan, pp. 1 - 4, presented at
, 2012, 'Understanding the deformation of metals in high speed cutting', in Proceeding of 10th International Conference on Progress of Machining Technology, Japan Society of Precision Engineering (Accepted 30 April 2012; Paper ID: 1002), Japan, pp. 1 - 6, presented at
, 2012, 'AN ACCURATE PREDICTION OF SILICON PHASES UNDER NANOINDENTATION', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, JAPAN, Tsubame, pp. 129 - 132, presented at
, 2012, 'High Speed Cutting of Metals: Shear Banding and Constitutive Modelling', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, JAPAN, Tsubame, pp. 1 - 1, presented at
, 2012, 'PLASTIC DEFORMATION BEHAVIOR IN BULK METALLIC GLASS UNDER A CUTTING TIP', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, JAPAN, Tsubame, pp. 117 - 120, presented at
, 2012, 'UNDERSTANDING THE DEFORMATION OF METALS IN HIGH SPEED CUTTING', in Chen D; Narutaki N; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, JAPAN SOC PRECISION ENGINEERING-JSPE, JAPAN, Tsubame, pp. 2 - 5, presented at
, 2012, 'Effect of chain morphology and carbon-nanotube additives on the glass transition temperature of polyethylene', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser, Wollongong, Australia, pp. 1 - 6, presented at
, 2012, 'Effect of grinding stresses on the mechanical properties of the grinding-hardened layer', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, The Conference Organiser, Sydney, pp. 1 - 6, presented at
, 2012, 'Effect residual stresses on the stability of bct-5 silicon', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser, Wollongong, Australia, pp. 1 - 6, presented at
, 2012, 'Elastic-plastic deformation of KDP crystals under nanoindentation', in Proceedings of the 15th International Conference on Advances in Materials and Processing Technologies, The Conference Organising Committee, Wollongong, pp. 705 - 711, presented at
, 2012, 'Nano-milling on Copper - A Molecular Dynamics Analysis', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference Organiser Paper No. 11306, Wollongong, Australia, pp. 1 - 7, presented at
, 2012, 'Understanding the friction and wear mechanisms of bulk metallic glass under contact sliding', in Proceeding of 15th International Conference on Advances in Materials and Processing Technologies, Wollongong Conference organiser. paper number is MAT-11374, Wollongong, Australia, pp. 1 - 6, presented at
, 2012, 'Methodologies for measuring residual stress distributions in epitaxial thin films', in Proceeding of 8th International Symposium on Precision Engineering Measurements and Instrumentation, Society of Photo-optical Instrumentation Engineers (SPIE), Bellingham, USA, pp. 1 - 8, presented at
, 2012, 'Molecular Dynamics modelling of carbon nanotube reinforcement in polymer resin', in http://paginas.fe.up.pt/~icnmmcs/Proceedings.pdf, Torino, Italy, presented at
, 2012, 'The mechanism of nano-scale shear banding in metallic glass', in Proceedings of 7th Australasian Congress of Applied, Engineers Australia, Canberra ACT, pp. 1 - 8, presented at
, 2012, 'A method for estimating the fracture toughness of rocks', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 895 - 904
, 2012, 'A new approach to the investigation of mixed lubrication in metal strip rolling', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 1013 - 1021
, 2011, 'Simulating the Stress and Wear of Hip Joint Prostheses under 3D Physiological Loading', in Computational Materials Science, Elsevier Science BV, Amsterdam, Netherlands, pp. 1 - 5, presented at
, 2011, 'Friction and wear behaviour of diamond composites during dynamic friction polishing', in Friction and wear behaviour of diamond composites during dynamic friction polishing, Extended paper submitted to Diamond and Related Material (Ref: dia2011_093), UK, pp. P1.91 - P1.91, presented at
, 2011, 'A finite element simulation of residual stresses induced by thermal and lattice mismatch in thin films', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 57 - 64, presented at
, 2011, 'Contact Stresses in PCD-on-PCD Hip Joint Prostheses', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 135 - 143, presented at
, 2011, 'Deformation of metals in high speed cutting: Some aspects in experimental analysis, numerical simulation and constitutive modelling.', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 43 - 48, presented at
, 2011, 'Investigation of Lattice Mismatch Stress in SoS Thin Film Systems by Raman Scattering and XRD Techniques', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 159 - 164, presented at
, 2011, 'Wear performance of PCD and WC mining picks', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 173 - 177, presented at
, 2011, 'Effect of attack angle on the pick performance in linear rock cutting', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 1312 - 1315, presented at
, 2011, 'Pick profile effect on linear cutting of sandstones', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 2163 - 2167, presented at
Filter by type
https://orcid.org/0000-0001-5735-158X