By Scientia Professor Liangchi Zhang

Journal articles

Wu C; Zhang LC; Ramaswamy Y; Gale D; Yang W; Xiao K; Yin Y; Zreiqata H, 2008, 'Novel sphene coatings on Ti–6Al–4V for orthopaedic implants using sol–gel method', ACTA Biomaterialia, 4, pp. 569 - 576, http://dx.doi.org/10.1016/j.actbio.2007.11.005

Chen Y; Zhang LC; Arsecularatne JA, 2008, 'Optical surface finish of PCD composites by dynamic friction polishing', Key Engineering Materials, 364-366, pp. 226 - 231, http://dx.doi.org/10.4028/www.scientific.net/KEM.364-366.226

Zhang LC; Mylvaganam K; Xiao K, 2008, 'The intrinsic frictional property of carbon nanotubes', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 32, pp. 1 - 4, http://dx.doi.org/10.4028/www.scientific.net/AMR.32.1

Zhang LC, 2008, 'The plasticity of monocrystalline silicon under nanoindentation', International Journal of Modern Physics B, 22, pp. 6022 - 6028, http://dx.doi.org/10.1142/S0217979208051522

Wang CY; Zhang LC, 2007, 'Aspect ratio and radius effects on the buckling behavior of multi-walled carbon nanotubes under axial compression', AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, pp. 119 - 126

Arsecularatne JA; Zhang LC, 2007, 'Carbon nanotube reinforced ceramic composites and their performance', Recent Patents on Nanotechnology, 1, pp. 176 - 185, http://dx.doi.org/10.2174/187221007782360411

Mylvaganam K; Zhang LC, 2007, 'Fabrication and application of polymer composites comprising carbon nanotubes', Recent Patents on Nanotechnology, 1, pp. 59 - 65, http://dx.doi.org/10.2174/187221007779814826

Chen Y; Zhang LC; Arsecularatne JA; Zarudi I, 2007, 'Polishing of polycrystalline diamond by the technique of dynamic friction, part 3: Mechanism exploration through debris analysis', International Journal of Machine Tools and Manufacture, 47, pp. 2282 - 2289, http://dx.doi.org/10.1016/j.ijmachtools.2007.06.004

Mylvaganam K; Zhang LC, 2007, 'Ballistic resistance capacity of carbon nanotubes', Nanotechnology, 18, http://dx.doi.org/10.1088/0957-4484/18/47/475701

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T; Sato M, 2007, 'The effect of anisotropy on the deformation and fracture of sapphire wafers subjected to thermal shocks', Journal of Materials Processing Technology, 194, pp. 52 - 62, http://dx.doi.org/10.1016/j.jmatprotec.2007.03.125

Pramanik A; Zhang LC; Arsecularatne JA, 2007, 'An FEM investigation into the behavior of metal matrix composites: Tool-particle interaction during orthogonal cutting', International Journal of Machine Tools and Manufacture, 47, pp. 1497 - 1506, http://dx.doi.org/10.1016/j.ijmachtools.2006.12.004

Chen Y; Zhang LC; Arsecularatne JA, 2007, 'Polishing of polycrystalline diamond by the technique of dynamic friction. Part 2: Material removal mechanism', International Journal of Machine Tools and Manufacture, 47, pp. 1615 - 1624, http://dx.doi.org/10.1016/j.ijmachtools.2006.11.003

Vodenitcharova T; Mylvaganam K; Zhang LC, 2007, 'Mechanical interaction between single-walled carbon nanotubes during the formation of a bundle', Journal of Materials Science, 42, pp. 4935 - 4941, http://dx.doi.org/10.1007/s10853-006-0701-8

Xiao KQ; Zhang LC; Zarudi I, 2007, 'Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites', Composites Science and Technology, 67, pp. 177 - 182, http://dx.doi.org/10.1016/j.compscitech.2006.07.027

Zhang LC, 2007, 'Grind-hardening of steel surfaces: a focused review', International Journal of Abrasive Technology, 1, pp. 3 - 36, http://dx.doi.org/10.1504/IJAT.2007.013847

Alauddin M; Zhang LC; Hashmi MSJ, 2007, 'Grinding force modelling: Combining dimensional analysis with response surface methodology', International Journal of Manufacturing Technology and Management, 12, pp. 299 - 310, http://dx.doi.org/10.1504/ijmtm.2007.014155

Nguyen T; Zarudi I; Zhang LC, 2007, 'Grinding-hardening with liquid nitrogen: Mechanisms and technology', International Journal of Machine Tools and Manufacture, 47, pp. 97 - 106, http://dx.doi.org/10.1016/j.ijmachtools.2006.02.010

Pramanik A; Zhang LC; Arsecularatne JA, 2007, 'Micro-indentation of metal matrix composite - An FEM investigation', Key Engineering Materials, 340-341 I, pp. 563 - 570, http://dx.doi.org/10.4028/0-87849-433-2.563

Chen Y; Zhang LC; Arsecularatne JA, 2007, 'Polishing of diamond composite cutting tools', International Journal of Surface Science and Engineering, 1, pp. 360 - 373, http://dx.doi.org/10.1504/IJSURFSE.2007.016690

Mylvaganam K; Zhang LC; Cheong WCD, 2007, 'The effect of interface chemical bonds on the behaviour of nanotube-polyethylene composites under nano-particle impacts', Journal of Computational and Theoretical Nanoscience, 4, pp. 122 - 126, http://dx.doi.org/10.1166/jctn.2007.011

Gu YT; Zhang LC, 2006, 'A concurrent multiscale method based on the meshfree method and molecular dynamics analysis', Multiscale Modeling and Simulation, 5, pp. 1128 - 1155, http://dx.doi.org/10.1137/060654232

Gu YT; Zhang LC; Wang QX, 2006, 'A meshless nonlinear analysis of the MEMS device', Emerging Trends: Keynote Lectures and Symposia - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010, 1, pp. 493 - 498

Chen Y; Zhang LC; Arsecularatne JA, 2006, 'Material removal mechanism in dynamic friction polishing of pcd', ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology, pp. 117 - 120

Pramanik A; Zhang LC; Arsecularatne JA, 2006, 'Prediction of cutting forces in machining of metal matrix composites', International Journal of Machine Tools and Manufacture, 46, pp. 1795 - 1803, http://dx.doi.org/10.1016/j.ijmachtools.2005.11.012

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T, 2006, 'The effect of thermal shocks on the stresses in a sapphire wafer', IEEE Transactions on Semiconductor Manufacturing, 19, pp. 449 - 453, http://dx.doi.org/10.1109/TSM.2006.883591

Zhang LC; Zarudi I; Xiao KQ, 2006, 'Novel behaviour of friction and wear of epoxy composites reinforced by carbon nanotubes', Wear, 261, pp. 806 - 811, http://dx.doi.org/10.1016/j.wear.2006.01.033

Mylvaganam K; Zhang LC, 2006, 'Energy absorption capacity of carbon nanotubes under ballistic impact', Applied Physics Letters, 89, http://dx.doi.org/10.1063/1.2356325

Xiao KQ; Zhang LC, 2006, 'The effect of compressed cold air and vegetable oil on the subsurface residual stress of ground tool steel', Journal of Materials Processing Technology, 178, pp. 9 - 13, http://dx.doi.org/10.1016/j.jmatprotec.2005.05.013

Guo YP; Hu MJ; Zhou HF; Zhang LC; Su JH; Wang HW; Shen YG, 2006, 'Low concentrations of NaHSO3 increase photosynthesis, biomass, and attenuate photoinhibition in Satsuma mandarin (Citrus unshiu Marc.) plants', Photosynthetica, 44, pp. 333 - 337, http://dx.doi.org/10.1007/s11099-006-0032-7

Vodenitcharova T; Zhang LC; Zarudi I; Yin Y; Domyo H; Ho T, 2006, 'Transient thermal analysis of sapphire wafers subjected to thermal shocks', IEEE Transactions on Semiconductor Manufacturing, 19, pp. 292 - 297, http://dx.doi.org/10.1109/TSM.2006.879419

Zarudi I; Zhang LC, 2006, 'Structural evolution of carbon nanotubes in composites under contact sliding stresses', Applied Physics Letters, 88, http://dx.doi.org/10.1063/1.2212063

Mylvaganam K; Vodenitcharova T; Zhang LC, 2006, 'The bending-kinking analysis of a single-walled carbon nanotube-a combined molecular dynamics and continuum mechanics technique', Journal of Materials Science, 41, pp. 3341 - 3347, http://dx.doi.org/10.1007/s10853-005-5389-7

Guo YP; Zhou HF; Zhang LC, 2006, 'Photosynthetic characteristics and protective mechanisms against photooxidation during high temperature stress in two citrus species', Scientia Horticulturae, 108, pp. 260 - 267, http://dx.doi.org/10.1016/j.scienta.2006.01.029

Vodenitcharova T; Zhang LC, 2006, 'Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube', International Journal of Solids and Structures, 43, pp. 3006 - 3024, http://dx.doi.org/10.1016/j.ijsolstr.2005.05.014

Chen Y; Zhang LC; Arsecularatne JA; Montross C, 2006, 'Polishing of polycrystalline diamond by the technique of dynamic friction, part 1: Prediction of the interface temperature rise', International Journal of Machine Tools and Manufacture, 46, pp. 580 - 587, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.018

Arsecularatne JA; Zhang LC; Montross C, 2006, 'Wear and tool life of tungsten carbide, PCBN and PCD cutting tools', International Journal of Machine Tools and Manufacture, 46, pp. 482 - 491, http://dx.doi.org/10.1016/j.ijmachtools.2005.07.015

Guo L; Zi YW; Lin H; Wei EC; Chen J; Liu M; Zhang LC; Li JQ; Gu H, 2006, 'Expression and functional analysis of the rice plasma-membrane intrinsic protein gene family', Cell Research, 16, pp. 277 - 286, http://dx.doi.org/10.1038/sj.cr.7310035

Nguyen T; Zhang LC, 2006, 'The coolant penetration in grinding with a segmented wheel - Part 2: Quantitative analysis', International Journal of Machine Tools and Manufacture, 46, pp. 114 - 121, http://dx.doi.org/10.1016/j.ijmachtools.2005.05.020

Huang W; Zhang LC; Gao YZ; Jin HY, 2006, 'The improvement of thermal stability of nickel silicide by adding a thin Zr interlayer', Microelectronic Engineering, 83, pp. 345 - 350, http://dx.doi.org/10.1016/j.mee.2005.10.001

Mylvaganam K; Zhang LC, 2006, 'Deformation-promoted reactivity of single-walled carbon nanotubes', Nanotechnology, 17, pp. 410 - 414, http://dx.doi.org/10.1088/0957-4484/17/2/011

Mylvaganam K; Zhang LC, 2006, 'A cross-scale characterization of interface properties between carbon nanotubes and polymer matrix', Key Engineering Materials, 312, pp. 217 - 222, http://dx.doi.org/10.4028/0-87849-994-6.217

Zhang LC; Mylvaganam K, 2006, 'Nano-tribological analysis by molecular dynamics simulation - A review', Journal of Computational and Theoretical Nanoscience, 3, pp. 167 - 188, http://dx.doi.org/10.1166/jctn.2006.2999

Lu JB; Yu J; Yan QS; Gao WQ; Zhang LC, 2006, 'A Novel Superfine Machining Technology Based on the Magnetorheological Effect of Abrasive Slurry', Materials Science Forum, 532-533, pp. 145 - 148, http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.145

Gu Y; Zhang L, 2006, 'A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes', International Journal of Nanomanufacturing, 1, pp. 210 - 210, http://dx.doi.org/10.1504/ijnm.2006.012192

Arsecularatne JA; Zhang LC; Montross C; Mathew P, 2006, 'On machining of hardened AISI D2 steel with PCBN tools', Journal of Materials Processing Technology, 171, pp. 244 - 252

Zhang LC; Nguyen T; Zarudi I, 2005, 'A new grinding-hardening technology using an inert cryogen', LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, pp. 647 - 652

Xiao KQ; Zhang LC, 2005, 'Effective separation and alignment of long entangled carbon nanotubes in epoxy', Journal of Materials Science, 40, pp. 6513 - 6516, http://dx.doi.org/10.1007/s10853-005-1601-z

Pramanik A; Zhang LC; Arsecularatne JA, 2005, 'Mechanism of force generation in cutting metal matrix composites', LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century, pp. 157 - 162

Huang W; Zhang LC; Gao YZ; Jin HY; Ning BJ; Zhang GQ, 2005, 'Effect of a thin W interlayer on the thermal stability and electrical characteristics of NiSi film', Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 23, pp. 2304 - 2308, http://dx.doi.org/10.1116/1.2101647

Nguyen T; Zhang LC, 2005, 'The coolant penetration in grinding with segmented wheels - Part 1: Mechanism and comparison with conventional wheels', International Journal of Machine Tools and Manufacture, 45, pp. 1412 - 1420, http://dx.doi.org/10.1016/j.ijmachtools.2005.01.035

Back to profile page