By Scientia Professor Liangchi Zhang

Conference Papers

Uddin MS; Zhang LC, 2011, 'Simulating the Stress and Wear of Hip Joint Prostheses under 3D Physiological Loading', in Computational Materials Science, Elsevier Science BV, Amsterdam, Netherlands, pp. 1 - 5, presented at 15th International Conference on Mechatronics Technology, Melbourne, Australia, 30 November 2011 - 02 December 2011

Chen Y; Zhang LC, 2011, 'Friction and wear behaviour of diamond composites during dynamic friction polishing', Extended paper submitted to Diamond and Related Material (Ref: dia2011_093), UK, pp. P1.91 - P1.91, presented at Proceedings of the 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Garmisch-Partenkirchen, Bavaria, Germany. (Paper Reference Number: 93), 04 September 2011 - 08 September 2011

Moridi A; Ruan HH; Zhang LC; Liu M, 2011, 'A finite element simulation of residual stresses induced by thermal and lattice mismatch in thin films', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 57 - 64, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Uddin MS; Zhang LC, 2011, 'Contact Stresses in PCD-on-PCD Hip Joint Prostheses', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 135 - 143, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Zhang LC, 2011, 'Deformation of metals in high speed cutting: Some aspects in experimental analysis, numerical simulation and constitutive modelling.', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 43 - 48, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Liu M; Ruan HH; Zhang LC, 2011, 'Investigation of Lattice Mismatch Stress in SoS Thin Film Systems by Raman Scattering and XRD Techniques', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 159 - 164, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Yao Q; Zhang LC; Mostafavi SS; Bao R; Lunn L; Melmeth C, 2011, 'Wear performance of PCD and WC mining picks', in AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, Advanced Engineering Solutions, Ottawa, Canada, pp. 173 - 177, presented at 7th International Conference on Advances and Trends in Engineering Materials and their Applications, AES-ATEMA'2011, Milan, Italy, 04 July 2011 - 08 July 2011

Mostafavi SS; Yao Q; Zhang LC; Li ; Lunn L; Melmeth C, 2011, 'Effect of attack angle on the pick performance in linear rock cutting', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 1312 - 1315, presented at Proceedings of the 45th US Rock Mechanics / Geomechanics Symposium, San Francisco, USA (Paper Number 596), 26 June 2011 - 29 June 2011, http://www.onepetro.org/mslib/servlet/onepetropreview?id=ARMA-11-596

Yao Q; Mostafavi SS; Bao R; Zhang LC; Lunn L; Melmeth C, 2011, 'Pick profile effect on linear cutting of sandstones', in US Rock Mechanics / Geomechanics Symposium, American Rock Mechanics Association, USA, pp. 2163 - 2167, presented at Proceedings of the 45th US Rock Mechanics / Geomechanics Symposium, San Francisco, USA (Paper Number 596), 26 June 2011 - 29 June 2011, http://www.proceedings.com/12753.html

Gu B; Zhang LC, 2011, 'A continuum computational method incorporating atomic interactions of materials', in International Conference on Computational & Experimental Engineering and Sciences. Proceedings, Tech Science Press, United States, pp. 1 - 6, presented at The 17th International Conference on Computational & Experimental Engineering and Sciences (ICCES'11), Nanjing, China, 18 April 2011 - 21 April 2011

Zhang LC, 2011, 'On the new plasticity theories for metal deformation under high strain, high strain rate and high temperature', in ICCES Organizing Committee (ed.), International Conference on Computational & Experimental Engineering and Sciences. Proceedings, Tech Science Press, United States, pp. 93 - 93, presented at The 17th International Conference on Computational & Experimental Engineering and Sciences, Nanjing, China, 18 April 2011 - 21 April 2011, http://www.techscience.com/icces/index.html

Zhang LC, 2011, 'Phase changes in mono-crystalline silicon under surface contact stresses', in Macro to Nano - Scale Inelastic Deformation and Failure of Materials and Multi-Scale Modeling, Numerical Engineering Analysis and Testing Inc (NEAT, Inc), Maryland USA, pp. 193 - 195, presented at 17th Intl Symp on Plasticity & Its Current Applications, Puerto Vallarta, Mexico, 03 January 2011 - 08 January 2011

Zhang LC, 2010, 'Continuum mechanics challenges in multi-scale manufacturing', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 10, presented at The 6th Australasian Congress on Applied Mechanics, ACAM 6, Perth, Australia, 12 December 2010 - 15 December 2010

Mylvaganam K; Zhang LC, 2010, 'Effect of nano-scratching direction on the damage in monocrystalline silicon', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 5, presented at 6th Australasian Congress on Applied Mechanics, ACAM 6, Perth, Australia, 12 December 2010 - 15 December 2010

Bao R; Zhang LC; Han J; Liu X, 2010, 'From Stokes roughness to Reynolds roughness: a perturbation characterisation.', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 1 - 10, presented at 6th Australasian Congress on Applied Mechanics, ACAM 6, Perth, Australia, 12 December 2010 - 15 December 2010

Mostafavi SS; Bao R; Zhang LC; Lunn J; Melmeth C, 2010, 'Energy Efficiency in Rock Cutting', in AEPA 2010 - The 10th Asia-Pacific COnference on Engineering Plasticity and Its Applications, Huazhong University of Science & Technology, China, pp. 1 - 5, presented at The 10th Asia-Pacific Conference on Engineering Plasticity and Its Applications, Wuhan, China, 15 November 2010 - 17 November 2010, http://eproceedings.worldscinet.com/9789814324052/9789814324052.shtml

Wang Y; Zhang LC; Biddut A, 2010, 'Chemical Effect on the Material Removal Rate in the CMP of Silicon Wafers', in Liao YS; Chen CCA; Chao CL; Tso PL (eds.), ADVANCES IN ABRASIVE TECHNOLOGY XIII, TRANS TECH PUBLICATIONS LTD, TAIWAN, Taipei, pp. 511 - 514, presented at 13th International Symposium on Advances in Abrasive Technology/1st Cross-Strait Conference on Precision Machining, TAIWAN, Taipei, 19 September 2010 - 22 September 2010, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.511

Mylvaganam K; Zhang LC, 2010, 'A Possible Method for Producing Layered Silicon Surfaces without Coating', Beijing, pp. 1 - 5, presented at Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, 08 August 2010 - 12 August 2010

Chen Y; Zhang LC, 2010, 'Quality Verification of Polished PCD Composites by Examining the Phase transformations', Beijing, China, presented at IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, China, 08 August 2010 - 12 August 2010

Zhang LC; Wang CY, 2009, 'Effectivewall thickness of single-walled carbon nanotubes for multi-scale analysis: The problem and a possible solution', in IUTAM Bookseries, pp. 53 - 61, http://dx.doi.org/10.1007/978-1-4020-9557-3_7

Chang L; Zhang LC, 2008, 'THE PLASTICITY OF MONOCRYSTALLINE SILICON UNDER NANOINDENTATION', in Huh H; Park CG; Lee CS; Keum YT (eds.), ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, WORLD SCIENTIFIC PUBL CO PTE LTD, SOUTH KOREA, Daejeon, pp. 650 - 656, presented at 9th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA 2008), SOUTH KOREA, Daejeon, 20 October 2008 - 24 October 2008, http://dx.doi.org/10.1142/9789814261579_0101

Tang C; Zhang LC; Mylvaganam K, 2008, 'Effect of water on the nano-friction and nano-wear of a silicon-diamond system at high speed sliding', Singapore, presented at Proceedings of the 5th International Symposium on Nanomanufacturing, Singapore, 23 January 2008 - 25 January 2008

Zhang LC; Wang C, 2008, 'Long wavelength vibration of microtubules', Singapore, presented at Proceedings of the 5th International Symposium on Nanomanufacturing, Singapore, 23 January 2008 - 25 January 2008

Wang WL; Gu YT; Zhang LC, 2008, 'Crack analysis using an improved meshless technique with irregular nodes', in Advanced Materials Research, pp. 263 - 266, http://dx.doi.org/10.4028/0-87849-475-8.263

Gu YT; Zhang LC, 2007, 'A new method for stress and deformation analysis from nano to macro dimensional scales', in Key Engineering Materials, pp. 955 - 960, http://dx.doi.org/10.4028/0-87849-433-2.955

Alauddin M; Zhang LC; Hashmi MSJ, 2006, 'A semi-analytical method for the modelling of grinding forces', in ICPMT2006 - Progress of Machining Technology - Proceedings of the 8th International Conference on Progress of Machining Technology, pp. 401 - 404

Pramanik A; Zhang L; Arsecularatne J, 2006, 'An FEM analysis of metal matrix composite machining', in Chen Q; Yamane Y; Fan R; Usuki H; Ochi A (eds.), Progress of Machining Technology, Proceedings, JAPAN SOC PRECISION ENGINEERING-JSPE, JAPAN, Matsue, pp. 109 - 112, presented at 8th International Conference on Progress of Machining Technology, JAPAN, Matsue, 09 November 2006 - 11 November 2006, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000248035200026&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Gu YT; Zhang LC, 2006, 'Deformation characterization of a nanoelectromechanical switch', in Journal of Physics: Conference Series, pp. 118 - 123, http://dx.doi.org/10.1088/1742-6596/34/1/020

Zarudi I; Zhang LC, 2006, 'Microcracking in monocrystalline silicon due to indentation and scratching', in Key Engineering Materials, pp. 345 - 350, http://dx.doi.org/10.4028/0-87849-994-6.345

Cheong WCD; Zhang LC, 2006, 'Molecular dynamics simulation of nano-indentation of carbon coated monocrystalline silicon', in Key Engineering Materials, pp. 351 - 356, http://dx.doi.org/10.4028/0-87849-994-6.351

Xiao KQ; Zhang LC, 2004, 'Residual stresses in steel components ground without liquid coolant', in Chen W; Yamane Y; Fan R; Ochi A (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, PEOPLES R CHINA, Suzhou, pp. 714 - 718, presented at 7th International Conference on Progress of Machining Technology, PEOPLES R CHINA, Suzhou, 08 December 2004 - 11 December 2004, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000227353600130&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Nguyen T; Zhang L, 2004, 'Coolant flow characteristics in a segmented grinding wheel system', in Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004, pp. 236 - 241

Nguyen T; Zhang L; Zarudi I, 2004, 'The effect of liquid nitrogen at surface grinding on the microstructure of a quenchable steel', in Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004, pp. 699 - 704

Zhang LC, 2004, 'Plasticity in monocrystalline silicon: experiment and modelling', in Shen WP; Xu JQ (ed.), ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2, TRANS TECH PUBLICATIONS LTD, PEOPLES R CHINA, Shanghai Jiaotong Univ, Shanghai, pp. 1 - 9, presented at 7th Asia-Pacific Symposiumon Engineering Plasticity and Its Applications (AEPA 2004), PEOPLES R CHINA, Shanghai Jiaotong Univ, Shanghai, 22 September 2004 - 26 September 2004, http://dx.doi.org/10.4028/www.scientific.net/KEM.274-276.1

Cheong WCD; Zhuang WZ; Zhang LC, 2004, 'Study of residual stress relaxation using X-ray diffraction', in Key Engineering Materials, pp. 871 - 876

Zhang LC; Tanaka H; Gupta P, 2004, 'The deformation of nano-whiskers of mono-crystalline copper: Shape effect, properties, shear banding and necking', in Key Engineering Materials, pp. 331 - 336, http://dx.doi.org/10.4028/www.scientific.net/kem.274-276.331

Hu NS; Zhang LC, 2003, 'A study on the grindability of multidirectional carbon fibre-reinforced plastics', in Journal of Materials Processing Technology, pp. 152 - 156, http://dx.doi.org/10.1016/S0924-0136(03)00704-0

Nguyen T; Zhang LC, 2003, 'An assessment of the applicability of cold air and oil mist in surface grinding', in Journal of Materials Processing Technology, pp. 224 - 230, http://dx.doi.org/10.1016/S0924-0136(03)00714-3

Yu X; Zhang L; Mai YW, 2003, 'Modelling and finite element treatment of intra-ply shearing of woven fabric', in Journal of Materials Processing Technology, pp. 47 - 52, http://dx.doi.org/10.1016/S0924-0136(03)00047-5

Zhang LC; Cheong D, 2003, 'Effect of nano-coating on the behaviour of nano-friction and nano-wear of some sliding systems.', in ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, AMER CHEMICAL SOC, LA, NEW ORLEANS, pp. U743 - U743, presented at 225th National Meeting of the American-Chemical-Society, LA, NEW ORLEANS, 23 March 2003 - 27 March 2003, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000187917803408&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Zhang LC, 2002, 'Mechanics and surface integrity of unidirectional fibre-reinforced plastics under orthogonal cutting and surface grinding', in Chen DH; Narutaki NH; Yamane YS; Chen WY; Ochi AI (eds.), PROGRESS OF MACHINING TECHNOLOGY, AVIATION INDUSTRY PRESS, PEOPLES R CHINA, XIAN, pp. 128 - 133, presented at 6th International Conference on Progress of Machining Technology, PEOPLES R CHINA, XIAN, 10 September 2002 - 14 September 2002, https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000180780900023&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1

Cheong WCD; Zhang LC, 2002, 'A stress criterion for the β-Sn transformation in silicon under indentation and uniaxial compression', in Key Engineering Materials, pp. 603 - 608

Vodenitcharova T; Zhang LC; Yu TX, 2002, 'Constitutive modelling of multi-phase transformation of silicon under nano-scale deformation', in Key Engineering Materials, pp. 621 - 626

Zarudi I; Zhang LC; Swain MV, 2002, 'Effect of water on the mechanical response of monocrystalline silicon to repeated micro-indentation', in Key Engineering Materials, pp. 609 - 614

XIAO K; ZHANG L, 2002, 'EFFECTS OF POLYMER PROPERTIES ON THE SURFACE FINISH AND CHIP FORMATION IN ORTHOGONAL CUTTING', in Applied Mechanics, WORLD SCIENTIFIC, pp. 279 - 284, presented at Proceedings of the Third Australasian Congress on Applied Mechanics, http://dx.doi.org/10.1142/9789812777973_0045

ZARUDI I; ZHANG L, 2002, 'IMPROVING THE TRIBOLOGICAL AND MECHANICAL PROPERTIES OF STEEL COMPONENTS BY GRINDING', in Applied Mechanics, WORLD SCIENTIFIC, pp. 291 - 296, presented at Proceedings of the Third Australasian Congress on Applied Mechanics, http://dx.doi.org/10.1142/9789812777973_0047

CHEONG WCD; ZHANG L, 2002, 'MOLECULAR DYNAMICS ANALYSIS OF NANO-WEAR OF MONOCRYSTALLINE SILICON UNDER MULTI-ASPERITY SLIDING', in Applied Mechanics, WORLD SCIENTIFIC, pp. 581 - 586, presented at Proceedings of the Third Australasian Congress on Applied Mechanics, http://dx.doi.org/10.1142/9789812777973_0094

ZARUDI I; ZHANG L, 2002, 'THERMAL ANALYSIS IN SURFACE MODIFICATION BY GRINDING', in Applied Mechanics, WORLD SCIENTIFIC, pp. 297 - 302, presented at Proceedings of the Third Australasian Congress on Applied Mechanics, http://dx.doi.org/10.1142/9789812777973_0048

Zhang LC; Zhang HJ; Wang XM, 2001, 'A force prediction model for cutting unidirectional fibre-reinforced plastics', in Machining Science and Technology, pp. 293 - 305, http://dx.doi.org/10.1081/MST-100108616

Mahdi M; Zhang LC, 2001, 'A finite element model for the orthogonal cutting of fiber-reinforced composite materials', in JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, ELSEVIER SCIENCE SA, SOUTH KOREA, SEOUL, pp. 373 - 377, presented at 5th Asia-Pacific Conference on Materials Processing, SOUTH KOREA, SEOUL, 25 June 2001 - 27 June 2001, http://dx.doi.org/10.1016/S0924-0136(01)00675-6

Back to profile page