By Scientia Professor Liangchi Zhang

Journal articles

Li W; Zhang L; Chen X; Wu C; Cui Z; Niu C, 2021, 'Predicting the evolution of sheet metal surface scratching by the technique of artificial intelligence', International Journal of Advanced Manufacturing Technology, 112, pp. 853 - 865, http://dx.doi.org/10.1007/s00170-020-06394-4

Rahaman ML; Zhang L, 2021, 'An investigation on the friction, wear and deformation of potassium dihydrogen phosphate', Wear, 476, pp. 203624 - 203624, http://dx.doi.org/10.1016/j.wear.2021.203624

Hou N; Zhang Y; Zhang L-C; Wang M-H, 2021, 'Material removal mechanisms and characteristics of potassium dihydrogen phosphate crystals under nanoscratching', Advances in Manufacturing, 9, pp. 558 - 567, http://dx.doi.org/10.1007/s40436-021-00356-z

Imran M; Zhang L; Gain AK, 2020, 'Advanced thermal metamaterial design for temperature control at the cloaked region', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-68481-6

Liu W; Zhang L; Luo N, 2020, 'Elastic modulus evolution of rocks under heating–cooling cycles', Scientific Reports, 10, http://dx.doi.org/10.1038/s41598-020-70920-3

Zhang Y; Hou N; Zhang LC; Wang Q, 2020, 'Elastic-plastic-brittle transitions of potassium dihydrogen phosphate crystals: characterization by nanoindentation', Advances in Manufacturing, 8, pp. 447 - 456, http://dx.doi.org/10.1007/s40436-020-00320-3

Wu Q; Zhang L, 2020, 'Microstructure-based three-dimensional characterization of chip formation and surface generation in the machining of particulate-reinforced metal matrix composites', International Journal of Extreme Manufacturing, 2, http://dx.doi.org/10.1088/2631-7990/abab4b

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Luo G; Sun L; Zhang L, 2020, 'Equivalent Circuit Models of Cell and Array for Resonant Cavity-Based Piezoelectric Micromachined Ultrasonic Transducer', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67, pp. 2103 - 2118, http://dx.doi.org/10.1109/TUFFC.2020.2993805

Gao S; Liu W; Zhang L; Gain AK, 2020, 'A new polymer-based mechanical metamaterial with tailorable large negative Poisson's ratios', Polymers, 12, pp. 1 - 15, http://dx.doi.org/10.3390/polym12071492

Vijayaraghavan V; Zhang L, 2020, 'Tensile Properties of Boron Nitride-Carbon Nanosheet-Reinforced Aluminum Nanocomposites Using Molecular Dynamics Simulation', JOM, 72, pp. 2305 - 2311, http://dx.doi.org/10.1007/s11837-020-04031-9

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Yang P; Sun L; Luo G; Zhang L, 2020, 'Array Design of Piezoelectric Micromachined Ultrasonic Transducers with Low-Crosstalk and High-Emission Performance', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67, pp. 789 - 800, http://dx.doi.org/10.1109/TUFFC.2019.2956181

Zhang Y; Hou N; Zhang L, 2020, 'Effect of ultra-precision fly-cutting on the surface integrity of potassium dihydrogen phosphate crystals', Optical Materials Express, 10, pp. 971 - 980, http://dx.doi.org/10.1364/OME.390276

Gain AK; Zhang L, 2020, 'Mechanisms and optimization for the rapid fabrication method of polymeric microlens arrays', Applied Optics, 59, pp. 405 - 412, http://dx.doi.org/10.1364/AO.383365

Wu Z; Liu W; Zhang L; Lim S, 2020, 'Amorphization and dislocation evolution mechanisms of single crystalline 6H-SiC', Acta Materialia, 182, pp. 60 - 67, http://dx.doi.org/10.1016/j.actamat.2019.10.037

Li C; Zhang Y; Zhou G; Wei Z; Zhang L, 2020, 'Theoretical modelling of brittle-to-ductile transition load of KDP crystals on (001) plane during nanoindentation and nanoscratch tests', Journal of Materials Research and Technology, 9, pp. 14142 - 14157, http://dx.doi.org/10.1016/j.jmrt.2020.09.131

Li C; Zhang L; Sun L; Yang S; Wu C; Long X; Ding J; Jiang Z, 2019, 'A quantitative analysis of the indentation fracture of fused silica', Journal of the American Ceramic Society, 102, pp. 7264 - 7277, http://dx.doi.org/10.1111/jace.16645

Wu Q; Xu W; Zhang L, 2019, 'Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage', Journal of Materials Processing Technology, 274, http://dx.doi.org/10.1016/j.jmatprotec.2019.116315

Sedaghat H; Xu W; Zhang L; Liu W, 2019, 'On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals', International Journal of Automotive Technology, 20, pp. 31 - 37, http://dx.doi.org/10.1007/s12239-019-0125-5

Gain AK; Zhang L, 2019, 'Temperature and humidity effects on microstructure and mechanical properties of an environmentally friendly Sn–Ag–Cu material', Journal of Materials Science, 54, pp. 12863 - 12874, http://dx.doi.org/10.1007/s10853-019-03784-2

Zhang Y; Hou N; Zhang LC, 2019, 'Understanding the formation mechanism of subsurface damage in potassium dihydrogen phosphate crystals during ultra-precision fly cutting', Advances in Manufacturing, 7, pp. 270 - 277, http://dx.doi.org/10.1007/s40436-019-00265-2

Wu Z; Liu W; Zhang L, 2019, 'Effect of structural anisotropy on the dislocation nucleation and evolution in 6H–SiC under nanoindentation', Ceramics International, 45, pp. 14229 - 14237, http://dx.doi.org/10.1016/j.ceramint.2019.04.131

Hou N; Zhang L; Zhang Y; Zhang F, 2019, 'On the Ultra-Precision Fabrication of Damage-Free Optical KDP Components: Mechanisms and Problems', Critical Reviews in Solid State and Materials Sciences, 44, pp. 283 - 297, http://dx.doi.org/10.1080/10408436.2018.1490247

Fang C; Yan Z; Deng W; Zhang L, 2019, 'Material removal in grinding sapphire wafers with brazed–diamond pellet plates', Materials and Manufacturing Processes, 34, pp. 791 - 799, http://dx.doi.org/10.1080/10426914.2019.1594260

Cui D; Zhang L; Mylvaganam K; Liu W, 2019, 'Molecular dynamics simulation of multi-groove nano-milling', Machining Science and Technology, 23, pp. 455 - 476, http://dx.doi.org/10.1080/10910344.2019.1575399

Xu W; Zhang L, 2019, 'Heat effect on the material removal in the machining of fibre-reinforced polymer composites', International Journal of Machine Tools and Manufacture, 140, pp. 1 - 11, http://dx.doi.org/10.1016/j.ijmachtools.2019.01.005

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2019, 'A new method for predicting the three-dimensional surface texture transfer in the skin pass rolling of metal strips', Wear, 426-427, pp. 1246 - 1264, http://dx.doi.org/10.1016/j.wear.2018.12.020

Wu Q; Xu W; Zhang L, 2019, 'Microstructure-based modelling of fracture of particulate reinforced metal matrix composites', Composites Part B: Engineering, 163, pp. 384 - 392, http://dx.doi.org/10.1016/j.compositesb.2018.12.099

Liu WD; Liu M; Zhang LC, 2019, 'Thermally induced surface deterioration of glassy carbons', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/ab11ed

Gain AK; Zhang L, 2019, 'Nanosized samarium oxide (Sm2O3) particles suppressed the IMC phases and enhanced the shear strength of environmental-friendly Sn-Ag-Cu material', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/ab0cd4

Gain AK; Zhang L, 2019, 'Effects of Ni nanoparticles addition on the microstructure, electrical and mechanical properties of Sn-Ag-Cu alloy', Materialia, 5, http://dx.doi.org/10.1016/j.mtla.2019.100234

Vijayaraghavan V; Zhang L, 2019, 'Nanomechanics of single layer hybrid boron nitride–carbon nanosheets: A molecular dynamics study', Computational Materials Science, 159, pp. 376 - 384, http://dx.doi.org/10.1016/j.commatsci.2018.12.042

Sedaghat H; Xu W; Zhang L, 2019, 'Ultrasonic vibration-assisted metal forming: Constitutive modelling of acoustoplasticity and applications', Journal of Materials Processing Technology, 265, pp. 122 - 129, http://dx.doi.org/10.1016/j.jmatprotec.2018.10.012

Mylvaganam K; Zhang L, 2019, 'Effect of external stresses on the optical and electronic properties of potassium dihydrogen phosphate crystals', Materials Research Express, 6, http://dx.doi.org/10.1088/2053-1591/aafa2d

Xu T; Zhao L; Jiang Z; Guo S; Li Z; Luo G; Sun L; Zhang L, 2019, 'An Analytical Equivalent Circuit Model for Optimization Design of a Broadband Piezoelectric Micromachined Ultrasonic Transducer with an Annular Diaphragm', IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 66, pp. 1760 - 1776, http://dx.doi.org/10.1109/TUFFC.2019.2928147

Liu W; Zhang L; Moridi A, 2019, 'Finite element analysis of the 3ω method for characterising high thermal conductivity ultra-thin film/substrate system', Coatings, 9, pp. 87, http://dx.doi.org/10.3390/COATINGS9020087

Vijayaraghavan V; Zhang L, 2019, 'Tensile and interfacial loading characteristics of boron nitride-carbon nanosheet reinforced polymer nanocomposites', Polymers, 11, pp. 1075, http://dx.doi.org/10.3390/POLYM11061075

Zhang Y; Hou N; Zhang LC, 2018, 'Investigation into the room temperature creep-deformation of potassium dihydrogen phosphate crystals using nanoindentation', Advances in Manufacturing, 6, pp. 376 - 383, http://dx.doi.org/10.1007/s40436-018-0234-9

Hoffman M; Zhang L, 2018, 'The Rising Importance of Precision Engineering', Engineering, 4, pp. 759, http://dx.doi.org/10.1016/j.eng.2018.11.007

Gain AK; Zhang L, 2018, 'The effects of TiO2 nanoparticles addition on the thermal shock resistance, shear strength and IMC layer growth of SAC305 alloy', Materialia, 3, pp. 64 - 73, http://dx.doi.org/10.1016/j.mtla.2018.10.009

Liu W; Zhang L, 2018, 'Mechanisms of the complex thermo-mechanical behavior of polymer glass across a wide range of temperature variations', Polymers, 10, pp. 1153, http://dx.doi.org/10.3390/polym10101153

Wu Z; Liu W; Zhang L, 2018, 'Critical loading conditions of amorphization, phase transformation, and dilation cracking in 6H-silicon carbide', Journal of the American Ceramic Society, 101, pp. 3585 - 3596, http://dx.doi.org/10.1111/jace.15527

Li C; Sun L; Yang S; Zhang L; Wu C; Jiang Z, 2018, 'Three-dimensional characterization and modeling of diamond electroplated grinding wheels', International Journal of Mechanical Sciences, 144, pp. 553 - 563, http://dx.doi.org/10.1016/j.ijmecsci.2018.06.010

Zhao B; Yu T; Ding W; Zhang L; Su H; Chen Z, 2018, 'Effect of micropores on the microstructure and mechanical properties of porous Cu-Sn-Ti composites', Materials Science and Engineering: A, 730, pp. 345 - 354, http://dx.doi.org/10.1016/j.msea.2018.06.013

Wu Q; Xu W; Zhang L, 2018, 'A micromechanics analysis of the material removal mechanisms in the cutting of ceramic particle reinforced metal matrix composites', Machining Science and Technology, 22, pp. 638 - 651, http://dx.doi.org/10.1080/10910344.2017.1382516

Wu C; Zhang L; Qu P; Li S; Jiang Z, 2018, 'A multi-field analysis of hydrodynamic lubrication in high speed rolling of metal strips', International Journal of Mechanical Sciences, 142-143, pp. 468 - 479, http://dx.doi.org/10.1016/j.ijmecsci.2018.05.021

Vijayaraghavan V; Zhang L, 2018, 'Effective mechanical properties and thickness determination of boron nitride nanosheets using molecular dynamics simulation', Nanomaterials, 8, pp. 546, http://dx.doi.org/10.3390/nano8070546

Monfared A; Liu W; Zhang L, 2018, 'Metallic glass hardening after thermoplastic forming', Materials Science and Engineering: A, 725, pp. 181 - 186, http://dx.doi.org/10.1016/j.msea.2018.04.021

Khaled ME; Zhang L; Liu W, 2018, 'Some critical issues in the characterization of nanoscale thermal conductivity by molecular dynamics analysis', Modelling and Simulation in Materials Science and Engineering, 26, http://dx.doi.org/10.1088/1361-651X/aabd3d

Zhao G; Wu C; Zhang L; Song J; Ding Q, 2018, 'Friction and wear behavior of PI and PTFE composites for ultrasonic motors', Polymers for Advanced Technologies, 29, pp. 1487 - 1496, http://dx.doi.org/10.1002/pat.4260

Xu W; Zhang L, 2018, 'Tool wear and its effect on the surface integrity in the machining of fibre-reinforced polymer composites', Composite Structures, 188, pp. 257 - 265, http://dx.doi.org/10.1016/j.compstruct.2018.01.018

Back to profile page